Kenmore 79578033218 top-mount refrigerator Parts

Your Kenmore refrigerator model number is printed on the appliance’s identification label. On Kenmore model 79578033218 top-mount refrigerators, that label is located on the interior liner of the refrigerator compartment; use that exact model number when looking up parts, manuals, or troubleshooting steps in the owner's manual.

Check these common spots first (starting with the most reliable location):

• Inside the fresh food (refrigerator) compartment on the interior side wall or liner
• Inside the refrigerator compartment near the crisper area (look around the liner surfaces)
• Inside the freezer compartment on an interior wall (less common, but possible)
• On a rating plate behind the lower kick plate or toe grille (on some refrigerators)

Record both the model and serial number exactly as shown. This prevents ordering the wrong Kenmore 795-series parts.

Kenmore refrigerators often share similar styling across multiple 795.7800 and 795.7803 variations (color codes and feature differences). Using the exact model number from the label ensures the right fit for parts like a refrigerator door gasket, door bin, shelf, or ice maker.

After you confirm the model number, you can:

• Use the model number to match the correct parts diagrams on this model page
• Look up care, cleaning, and troubleshooting steps in the owner's manual
• Order parts from this page, or search by model on Sears PartsDirect

Last updated: February 2026

For Kenmore model 79578033218, the most reliable way to confirm cubic feet is to check the capacity listed in the owner's manual. The model number itself does not consistently encode exact interior volume, so use the manual spec or calculate an estimate from interior measurements.

• Check the product specifications section in the owner's manual.
• Look at the model and serial label inside the fresh food compartment (commonly on the interior liner); then match the full model number to the spec listing.
• If you cannot access the spec page quickly, estimate capacity by measuring the usable interior space.

1. Empty the compartment you are measuring (refrigerator section and freezer section).
2. Measure width x depth x height of the usable interior space in inches.
3. Multiply to get cubic inches.
4. Divide by 1,728 to convert cubic inches to cubic feet.

• Measure to the inside walls, not the door bins.
• Exclude areas blocked by the evaporator cover, air ducts, or fixed housings.
• Measure freezer and refrigerator sections separately, then add them.

Cubic feet affects how much food you can store, how you organize shelves and door bins, and whether replacement storage parts fit your layout. If you are replacing broken storage components, ordering the correct bin or shelf for 79578033218 prevents fit issues.

• Lg refrigerator door bin MAN62570801
• Lg refrigerator door bin MAN62570901
• Refrigerator freezer door bin MAN62571001
• Refrigerator shelf AHT73455102

If you need additional parts beyond the list for this model, search by the full model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore refrigerators, including top-mount models like 79578033218, typically last 10 to 15 years with normal household use and basic maintenance. Regular cleaning, good door sealing, and prompt repairs are what most often determine whether you land closer to 10 years or closer to 15.

A refrigerator’s life is mostly driven by how hard the sealed system and fans have to work, plus how well the doors seal.

• Condenser cleanliness: dusty coils make the compressor run hotter and longer
• Door gasket condition: air leaks cause longer run times and frost issues
• Airflow: blocked vents reduce cooling efficiency
• Room conditions: hot, humid kitchens increase workload
• Repair timing: fixing small issues early prevents bigger failures

We recommend using the care and cleaning guidance in your owner's manual and focusing on the items below.

• Vacuum and brush condenser area regularly (frequency depends on dust and pets)
• Keep door bins and shelves seated correctly so doors close fully
• Clean and inspect door gaskets; correct gaps and warping early
• Avoid overpacking; keep air passages open in both compartments
• Confirm temperatures stay steady (about 37°F fresh food, 0°F freezer)

If wear items are broken or missing, replacing them helps the refrigerator run efficiently and prevents temperature swings.

A refrigerator that seals tightly and moves air correctly runs fewer hours per day. That reduces compressor stress, helps food stay at safe temperatures, and is the most reliable way to extend service life.

For replacement parts and diagrams for your Kenmore 79578033218, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

A 33-inch refrigerator typically will not fit well in a true 33-inch-wide opening because you need side clearance for leveling, airflow, and the doors to swing without rubbing. For Kenmore model 79578033218, we recommend confirming the exact cabinet width and required clearances in the owner's manual.

Use these practical targets when measuring your opening for a 33-inch class top-mount refrigerator:

• Width: plan for at least 34 inches to avoid binding and to allow minor out-of-square walls
• Sides: allow about 1/2 inch total (roughly 1/4 inch per side) when possible
• Top: leave space so heat can escape and the cabinet can be leveled
• Back: leave room for the power cord, water line (if equipped), and airflow
• Front: make sure doors can open fully without hitting a wall or cabinet return

Measure in multiple spots because openings are often not perfectly square.

• Measure the opening at the front and at the back
• Measure top, middle, and bottom width
• Check for baseboards, trim, and door casing that reduce usable width
• Confirm the floor is reasonably level; leveling feet need adjustment room
• Plan a path for delivery (hallways, turns, and doorways)

A too-tight opening can prevent proper leveling and can cause doors to bind or not close completely. Your manual’s troubleshooting guidance also notes that an unlevel refrigerator or items out of position can contribute to doors not closing fully, so starting with correct fit and leveling helps performance and temperature stability.

If the refrigerator fits but the doors rub, sag, or do not close smoothly, these parts commonly address alignment and swing problems:

• Refrigerator door hinge bushing 4984JJ3003A
• Refrigerator door hinge AEH73976901
• Refrigerator door stop MJB63010704

You can order replacement parts for Kenmore 79578033218 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

The most common problems we see on Kenmore top-mount refrigerators like model 79578033218 are warm temperatures (cooling issues), water leaks, ice maker problems, doors that do not seal or close, and noises. Use the troubleshooting section in the 79578033218 owner’s manual to pinpoint the cause quickly.

• Not cooling or warm temps: controls set incorrectly, unit in defrost cycle, restricted airflow, fan or defrost issue
• Water under the unit: defrost drain restriction, excess humidity causing more water in the defrost pan
• Ice maker not making ice: new installation wait time, shutoff valve not fully open, kinked water line, low water pressure
• Doors not closing/sealing: refrigerator not level, food blocking, bins/shelves out of position, gasket sticking
• Noises: normal operating sounds amplified by floors/cabinets, or vibration from leveling issues

• Confirm the cord is plugged in and the control is not set to OFF.
• If cooling seems to pause, wait about 30 minutes for a defrost cycle to finish.
• If the OFF light is on and it is not cooling, turn off Demo mode by adjusting temperature until the OFF light goes out.
• Make sure doors close freely; push bins fully in and clean gasket contact surfaces.
• For ice maker issues, open the shutoff valve fully; allow 12 to 24 hours for initial ice and up to 72 hours for full production.

Most cooling, leaking, and ice complaints trace back to airflow and door sealing. A door that does not seal tightly can cause frost buildup, temperature swings, and longer run times.

You can order model-matched replacement parts from the parts list for 79578033218, or search by model number on Sears PartsDirect.

Last updated: February 2026