Kenmore 25360412613 refrigerator Parts

Yes. On the Kenmore 25360412613 refrigerator, we recommend DIY replacement for simple, non-sealed-system items (drawers, door racks, gaskets, light bulbs, ice maker). For cooling-system or refrigerant-related repairs, use a qualified service technician.

Good DIY repairs vs. pro-only repairs

Here’s a practical way to decide what you can handle safely.

• Good DIY: shelves, bins, crisper parts, door racks, door gaskets, light bulb, ice maker
• Usually pro-only: compressor, evaporator, condenser, refrigerant line work, sealed-system leaks
• DIY with extra care: evaporator fan access (sharp edges, wiring connectors, tight spaces)

Safety steps we follow before any repair

Always start with the basics to prevent shock, cuts, and broken glass.

• Unplug the refrigerator before removing covers or touching wiring
• Wear gloves (especially around sheet metal and light bulb areas)
• Use two hands for glass shelves and covers; avoid sudden temperature changes
• After changing temperature settings, wait 24 hours before making more adjustments
• If your model has an anti-tip device, make sure it is installed and contacting the floor

For model-specific handling, removal steps, and safety notes, use the 25360412613 owner’s manual and the 25360412613 installation guide.

Common parts customers replace on this model

These are examples of model-compatible parts that are typically straightforward to swap.

Part you’re replacing	What it fixes	Example part for this model
Light bulb	No interior light	Refrigerator light bulb 316538904
Door gasket	Warm spots, sweating, poor seal	Frigidaire refrigerator door gasket (white) 242193206 or frigidaire refrigerator door gasket (black) 242193212
Ice maker	No ice, small batches	Refrigerator ice maker IM116000
Crisper drawer	Cracked or missing bin	Crisper drawer - refrigerator storage component by frigidaire 240337103

Why it matters

Choosing the right DIY repair saves time and money, but sealed-system work involves specialized tools and refrigerant handling. Sticking to safe, accessible parts helps keep your Kenmore 25360412613 reliable without creating new cooling or electrical problems.

Last updated: February 2026

Yes. We still carry replacement parts for Kenmore refrigerators, including model 25360412613, so you can keep your fridge running with the correct fit and function. Use your model number to match parts like door gaskets, drawers, bulbs, and cooling-system components.

How to confirm you’re ordering the right part

The most reliable match comes from using the full model number and comparing the part description to what’s installed in your refrigerator.

• Use the exact model number 25360412613 when selecting parts
• Compare the part name and where it installs (door, crisper area, freezer, etc.)
• Check color-specific items (for example, black vs white door gasket)
• Verify any installation notes and diagrams in the 25360412613 owner’s manual
• If you’re replacing a cooling-system sealed component, plan for professional service

Common Kenmore 25360412613 parts customers replace

Here are a few frequently replaced items for this model that we stock.

What you’re fixing	Typical symptom	Example part for this model
Door not sealing	Frost, sweating, warm temps	Frigidaire refrigerator door gasket (white) 242193206 or frigidaire refrigerator door gasket (black) 242193212
Noisy or warm fridge section	Poor airflow, warm fresh food	Refrigerator evaporator fan motor (part ID 242077705)
Dim or no interior light	Light out when door opens	Refrigerator light bulb (part ID 316538904)
Broken storage	Drawer won’t slide or is cracked	Crisper drawer (part ID 240337103)

Why it matters

Using the correct Kenmore model number helps prevent returns and repeat repairs. A door gasket that fits correctly improves temperature stability and efficiency; a correct fan motor restores airflow that protects food and reduces compressor run time.

Last updated: February 2026

A bad compressor in your Kenmore refrigerator model 25360412613 usually shows up as poor cooling with the unit trying to run, repeated clicking as it attempts to start, or abnormal compressor temperature (very hot after repeated start attempts). Use the 25360412613 owner's manual to compare normal operating sounds and run behavior.

Quick checks we recommend first

Before blaming the compressor, rule out common issues that mimic compressor failure:

• Confirm the refrigerator has had 8 to 12 hours to cool after startup or a power outage.
• Listen for normal sounds; a modern compressor can have a higher-pitched hum or pulsating sound.
• Check that doors close fully and food packages are not holding the door open.
• Inspect the door gasket for gaps, tears, or areas that do not seal.
• Verify temperature controls are not set incorrectly; allow 24 hours after changes.
• Make sure condenser airflow is not blocked (rear/bottom area).

Symptoms that point to a compressor or start problem

These signs are more consistent with a compressor that is failing or not starting:

What you notice	What it often means	What to do next
Repeated clicking every few minutes, little or no cooling	Compressor start device/capacitor issue or locked compressor	Have a technician test start components and compressor amperage
Compressor is very hot and cooling is weak	Compressor struggling under load	Check condenser airflow; then schedule electrical diagnosis
Compressor is silent but fans run	Compressor not being energized or start circuit failure	Check power supply and controls; then test start circuit
Compressor runs almost constantly and temps stay warm	Sealed system/compressor efficiency problem	Professional sealed-system evaluation

Why it matters

The compressor is the heart of the sealed cooling system. If the compressor cannot start or cannot pump refrigerant effectively, the refrigerator may run longer, temperatures will drift warmer, and food safety becomes a concern.

Parts that are commonly involved

If diagnosis confirms a compressor-related failure, these model-compatible parts are often part of the repair path:

• Refrigerator compressor 5303918659 (sealed-system component; typically requires professional service)
• Gibson refrigerator run capacitor 297286803 (helps the compressor start and run)

Last updated: February 2026

Kenmore refrigerator model 25360412613 does not use one universal “reset” button; the reliable reset is a power reset. Unplug the refrigerator (or switch off the breaker) for about 5 minutes, then restore power and allow 8 to 12 hours for temperatures to stabilize.

How to reset it (safe, effective steps)

• Unplug the power cord from the wall outlet (or turn the circuit breaker off).
• Wait 5 minutes to clear the control and restart the cooling cycle.
• Plug back in (or turn the breaker on).
• Confirm the interior light and fans come on after the restart.
• Set the temperature controls back to your normal settings.
• Give the refrigerator 8 to 12 hours to pull back down to temperature.

For model-specific control locations and normal operating behavior, follow the 25360412613 owner's manual.

What a “reset” fixes (and what it does not)

A power reset helps when the refrigerator is acting “glitchy” after a power outage, the controls are unresponsive, or cooling seems off after the unit was unplugged.

It usually does not fix problems caused by failed parts such as:

• A weak evaporator fan motor
• A defrost system failure (heater or thermostat)
• A torn or warped door gasket letting warm air in

If you suspect a cooling-airflow issue, our how to fix your evaporator cooling fan guide walks through common symptoms and checks.

Quick troubleshooting after the reset

Symptom after reset	Most likely cause	What to check first
Runs but not cooling well	Door not sealing, airflow blocked	Door closes fully, vents not blocked
Runs a lot	Warm room, frequent door openings	Allow 8 to 12 hours, limit openings
No lights, no sound	Power supply issue	Outlet, breaker, house fuse

Why it matters

A true power reset restores normal operation after interruptions and prevents unnecessary part replacement. If the refrigerator was recently disconnected, longer run times are normal while it re-cools.

Last updated: February 2026

A Kenmore refrigerator like model 25360412613 usually stops cooling because cold air is not circulating correctly, warm air is leaking in, or the sealed system is not removing heat. Start with door sealing, airflow (vents and fan), and condenser cleaning; these cause most no-cool complaints.

Quick checks we recommend first

• Confirm the doors close tightly and the cabinet is level; a slightly open door can warm the fresh food section fast.
• Check for blocked air vents at the upper rear of the refrigerator compartment; overcrowding reduces airflow and causes uneven or weak cooling.
• Clean the condenser (dust buildup makes the unit run inefficiently and can lead to poor cooling).
• Allow recovery time after power loss or unplugging; many refrigerators need 8 to 12 hours to cool down completely.
• Verify temperature controls are set to the recommended range in the 25360412613 owner's manual.

Most common causes (and what to look for)

Likely cause	What you notice	What to do next
Door gasket leak (dirty, worn, cracked, poorly fitted)	Long run times, warm temps, moisture between doors	Clean the gasket and mating surface; replace if torn or deformed (match color/style)
Airflow problem (blocked vents)	Back wall cold but food warm, uneven temps	Reorganize shelves; keep vents clear
Evaporator fan not moving air	Freezer cold but fridge warm, weak airflow	Inspect/replace the Refrigerator evaporator fan motor 242077705 if the fan is not running
Defrost system issue (ice buildup on evaporator)	Frost/ice behind rear freezer panel, warming over days	Check defrost heater and thermostat; service as needed
Dirty condenser / poor heat rejection	Unit runs a lot, cabinet sides warm	Clean condenser coils and ensure good airflow around the cabinet

Parts that commonly fix “not cooling” symptoms on this model

These are frequent repair items when airflow or defrost problems are confirmed:

• Refrigerator evaporator fan motor 242077705 (moves cold air through the compartments)
• Refrigerator defrost heater 242044008 (melts frost off the evaporator)
• Refrigerator defrost bi-metal thermostat 5303918634 (helps control defrost heating)

Why it matters

When warm air leaks in or cold air cannot circulate, the compressor may run longer without reaching safe food temperatures. Fixing sealing, airflow, and condenser cleanliness restores normal cycling and helps prevent food spoilage.

Last updated: February 2026

Your Kenmore refrigerator’s model number is printed on the serial plate inside the fresh food (refrigerator) compartment. Once you find that number, match it exactly (including all digits) to look up the correct parts and instructions, such as for Kenmore model 25360412613 in the 25360412613 owner's manual.

Where to find the model number label

On Kenmore top-mount refrigerators like model 25360412613, the serial plate is typically inside the refrigerator compartment.

• Look on the inside wall of the fresh food section (often near the crisper area)
• Check near the ceiling area inside the refrigerator compartment
• Look along the door frame when the refrigerator door is open
• Wipe the label gently; use soap and water only so the printing stays readable

What to write down (and why)

Record both the model and serial number exactly as shown; one digit off can lead to the wrong door gasket, ice maker, or evaporator fan motor.

Item on label	What it’s used for	Example format
Model number	Parts lookup and correct diagrams	253.6041* style family, or full model like 25360412613
Serial number	Production details and service reference	Letters and numbers
Purchase date (if known)	Warranty and maintenance tracking	Month/day/year

Quick tips to avoid common mix-ups

• Use the full model number, not just the “253.” prefix
• Include any suffix digits; they can change shelves, drawers, and electrical parts
• If the label is hard to read, take a clear photo and zoom in

Why it matters

Kenmore model numbers identify the exact configuration of your refrigerator (doors, controls, cooling system, and optional ice maker). Using the correct model number helps ensure parts like a door gasket or crisper drawer fit and function properly.

Last updated: February 2026