Frigidaire LGHD2369TF3 refrigerator Parts

Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire refrigerator; for this unit, use the complete model number LGHD2369TF3 from the data tag, then match parts by name and ID to avoid ordering the wrong item.

Check the refrigerator’s data tag (model and serial label). Common locations on Frigidaire refrigerators include:

• Inside the fresh food compartment on a side wall
• Along the door opening (cabinet frame) near the hinges
• Behind the crisper drawers or on the lower liner area
• On the back of the unit near the power cord entry (less common)

For diagrams, feature locations, and model-specific guidance, use the LGHD2369TF3 owner's manual.

When you search by model number, confirm the part using both the description and the identifier.

• Match the part name to the symptom (ice, water, cooling, door seal)
• Match the part ID to the listing to avoid look-alike parts
• Compare your original part’s label number when accessible
• Use the refrigerator’s exploded-view diagrams to confirm placement
• If your refrigerator has optional features, verify your unit actually has that feature installed

If you are replacing the water filter, our how to replace the water filter in a Frigidaire refrigerator guide helps you identify filter styles and install steps.

Frigidaire often uses similar-looking parts across multiple refrigerator series. Searching by LGHD2369TF3 reduces returns, prevents fit issues, and helps restore performance faster (ice maker, water dispenser, temperature control, and door sealing).

Last updated: February 2026

The most common problem we see on Frigidaire refrigerators like model LGHD2369TF3 is a cooling complaint: the freezer stays cold but the fresh food section warms up. This is usually caused by restricted airflow (frost buildup, blocked vents), an evaporator fan issue, or a temperature-sensing/defrost problem.

• Make sure air vents in the refrigerator section are not blocked by food packages.
• Set temperatures to typical targets: 37°F for fresh food and 0°F for freezer.
• Listen for the evaporator fan running when the doors are closed (a stalled fan often means poor fridge cooling).
• Check for heavy frost on the freezer back wall (often points to a defrost system issue).
• Clean condenser coils and confirm the condenser fan (if equipped) is running.
• Confirm doors seal tightly and the unit is level so doors close fully.

When symptoms match, these model-specific parts are frequent solutions:

• Frigidaire refrigerator evaporator fan motor 809069206 (airflow to the fresh food section)
• Refrigerator evaporator fan blade 5308000010 (cracked or slipping blade reduces airflow)
• Refrigerator temperature sensor 5303918775 (temperature feedback for control decisions)
• Refrigerator ice maker 243297613 (no ice or intermittent ice production)
• Refrigerator water inlet valve assembly 242253002 (weak/no water to ice maker or dispenser)

A refrigerator can still freeze food while the refrigerator section warms because the freezer is where the cooling is made; the fresh food section depends on a fan and air passages to move that cold air. Fixing airflow and defrost issues early helps prevent food spoilage and repeat icing.

Last updated: February 2026

Yes. On the Frigidaire LGHD2369TF3 bottom-mount refrigerator, we can replace many common parts ourselves (filters, gaskets, ice maker parts, hinges) by unplugging the refrigerator first and following the steps in the LGHD2369TF3 owner's manual. Sealed-system and refrigerant repairs require a qualified technician.

• Good DIY: water filter, air filter, door gasket, ice maker assembly, door hinge, drawer hardware
• DIY with extra care: door removal (water line and wiring harness), control boards (label wires, avoid pinching)
• Technician only: compressor, evaporator, heat exchange, refrigerant leaks, any sealed-system work

The manual notes the On/Off button can stop cooling but does not disconnect power; we unplug before service.

• Unplug the power cord (do not rely on the control panel)
• Shut off the water supply before disconnecting any water line
• Handle tempered glass shelves carefully
• Support doors and drawers; they are heavy and can fall

For LGHD2369TF3 door removal, open doors to about 90°, disconnect the harness, and pull about 5 feet of water tube from the back without kinking it; reinstall by fully inserting the tube to the marking line. Use the LGHD2369TF3 installation guide for the exact sequence.

• Refrigerator ice maker 243297613
• Refrigerator filter assembly EPTWFU01
• Frigidaire refrigerator freezer door gasket (gray) 5304537408
• Refrigerator water inlet valve assembly 242253002

Picking the right DIY repairs prevents leaks, food spoilage, and repeat failures; it also keeps us safe by avoiding energized components and sealed-system work.

Last updated: February 2026