Frigidaire FFSS2314QS9A refrigerator Parts

Yes. For your Frigidaire FFSS2314QS9A side-by-side refrigerator, we look up the full model number to pull the correct parts list and diagrams so you can match the exact replacement part to your refrigerator’s configuration.

How to find the model number and use it

Use the complete model number exactly as shown on the refrigerator’s model tag, then search parts by that number.

• Enter FFSS2314QS9A (not a partial number)
• Match the part name to the diagram location before ordering
• Compare your old part to the listing (connectors, mounting points, and shape)
• Use the manual for model-specific details like filter seating and setup steps

For operating and setup details that affect parts selection (like making sure the filter is fully seated), check the owner's manual.

Common parts customers look up for this model

These are examples of parts that are commonly searched by model number for FFSS2314QS9A:

Symptom or need	Part to check	Example from this model’s parts list
No ice or weak ice production	Ice maker, water inlet valve	Refrigerator ice maker 241798231, Frigidaire refrigerator water inlet valve assembly 242252702
Bad taste or slow water flow	Water filter	Refrigerator water filter WF3CB
Warm refrigerator section	Evaporator fan motor, air damper	Refrigerator evaporator fan motor 242077705, refrigerator air damper control assembly 242303001

Why it matters

Frigidaire often uses similar-looking parts across multiple refrigerator series. Searching by FFSS2314QS9A helps prevent ordering a part that fits a different revision, color, or wiring style.

Last updated: February 2026

For a Frigidaire FFSS2314QS9A side-by-side refrigerator, most common repairs typically land in the $200 to $450 range (parts plus labor), while major sealed-system work (such as a compressor issue) often runs $700 to $1,200+. Your total depends on the failed part, diagnostic fee, and labor time.

Typical repair cost ranges (parts + labor)

• Water filter or dispenser flow issues: $100 to $250
• Ice maker not making ice: $200 to $450
• Water inlet valve problems or leaks: $200 to $450
• Evaporator fan noise or warm fridge section: $250 to $550
• Defrost problems (frost buildup, warm temps): $250 to $600
• Control board or electronic control issues: $300 to $700
• Compressor or sealed system repairs: $700 to $1,200+

Common parts that affect the price

If you are troubleshooting a specific symptom, these model-matched parts are often involved:

• Refrigerator ice maker 241798231 (no ice, small cubes, intermittent production)
• Refrigerator water inlet valve assembly 242252702 (no water to dispenser or ice maker, leaking)
• Refrigerator water filter WF3CB (slow water flow, poor ice production)
• Refrigerator evaporator fan motor 242077705 (warm fresh food section, fan noise)
• Refrigerator electronic control A01078804 (temperature control problems)

What a service visit usually includes

Most refrigerator repairs are billed as a combination of these items:

Cost item	What it covers	Typical range
Diagnostic/service call	Trip + troubleshooting	$75 to $150
Labor	Repair time on-site	$100 to $300+
Parts	Replacement components	Varies by part

Why it matters

A refrigerator that is running warm, leaking, or not making ice can look like one problem but be caused by another (for example, a clogged filter can reduce ice production, and a door seal leak can make the unit run longer). Using the troubleshooting steps in the owner's manual helps narrow the failure so you replace the right part the first time.

Last updated: February 2026

The most common Frigidaire refrigerator problem is a cooling complaint: the refrigerator runs too long or temperatures rise because airflow or heat removal is restricted (often dirty condenser coils) or a door gasket is leaking. Ice maker “no ice” is another frequent issue on the FFSS2314QS9A.

What we see most often (and what to check first)

• Dirty condenser coils: the refrigerator may run a lot and struggle to hold temperature.
• Door not sealing (dirty, worn, cracked, or poorly fitted gasket): warm air leaks in and causes long run times.
• Doors opened too often: warm air entering makes the unit run longer.
• Evaporator fan issue: weak or no airflow can cause warm fresh food section or uneven temps.
• Ice maker not making ice: shutoff arm up, power switch off, a cube jam, or a restricted water supply.

For model-specific operating and troubleshooting steps, use the owner's manual.

Quick symptom-to-cause guide

Symptom	Most likely cause	What to do next
Fridge warm, freezer OK	Airflow problem (often evaporator fan)	Listen for fan, check vents for blockage
Unit runs “all the time”	Dirty condenser or door gasket leak	Clean coils; inspect and clean gasket
Frost or moisture inside	Door slightly open or frequent openings	Confirm doors close fully; reduce openings
Ice maker makes no ice	Shutoff arm/power off, jam, restricted valve/filter	Set to ON, clear jam, check water supply

Parts that commonly solve these problems on FFSS2314QS9A

If troubleshooting points to a failed component, these are common replacements for this model:

• Refrigerator evaporator fan motor 242077705 (airflow and cooling complaints)
• Frigidaire refrigerator water inlet valve assembly 242252702 (ice maker or dispenser water supply issues)
• Refrigerator water filter WF3CB (restricted flow, small cubes, slow dispense)
• Refrigerator ice maker 241798231 (no ice after power and water checks)

Why it matters

Cooling and ice maker problems often start small (restricted airflow, a poor door seal, or low water flow) but they force the compressor to run longer. Fixing the root cause helps protect food temperatures, reduce frost and moisture, and improve efficiency.

Last updated: February 2026