KitchenAid KSRP25FTMS01 side-by-side refrigerator Parts

Yes. KitchenAid makes 33-inch wide refrigerators in multiple configurations (commonly French door and bottom-freezer styles). Your KitchenAid KSRP25FTMS01 is a side-by-side model; for exact cabinet width and clearance needs, confirm the dimensions listed in the KSRP25FTMS01 owner's manual.

A “33-inch” refrigerator is designed for a 33-inch opening, but you still need clearance for doors, handles, and airflow.

• Measure the cabinet opening at the front and back
• Allow space behind the unit for water line and power cord
• Plan clearance for door swing and drawer pull-out
• Confirm hinge-side clearance if the unit sits next to a wall
• Check flooring transitions so rollers can move in and out

Choosing the right width prevents door interference, poor ventilation (which can hurt cooling performance), and installation headaches. Verifying the exact measurements in the manual helps you avoid returns and ensures the refrigerator operates efficiently.

If your current refrigerator has a dispenser or filter system and you are maintaining it while shopping for a new unit, use how to replace the water filter in a KitchenAid refrigerator for step-by-step guidance.

Last updated: January 2026

Most KitchenAid Superba side-by-side refrigerators are in the mid-20 cubic foot range; a very common size is about 25.3 cu. ft. For your KitchenAid KSRP25FTMS01, the exact capacity is listed in the product specifications section of the KSRP25FTMS01 owner's manual.

Use these quick checks to make sure you are looking at the right spec for your exact unit:

• Match the full model number on the rating label to KSRP25FTMS01
• Look for “capacity” or “total volume” in the specifications section
• If the manual lists separate volumes, add refrigerator + freezer for total capacity
• Ignore “usable space” estimates from online listings; they can vary by configuration
• If shelves or bins were changed, it does not change the official cubic-foot rating

If you are comparing models, most Superba side-by-sides fall into this range:

Capacity affects how much food you can store, but it also impacts airflow and temperature stability. Knowing the correct cubic feet helps when choosing replacement shelves/bins, planning kitchen space, and comparing energy use across similar KitchenAid refrigerators.

Last updated: January 2026

The most common issues we see with the KitchenAid KSRP25FTMS01 side-by-side refrigerator involve water and ice dispensing, warm temperatures from poor airflow, and frost buildup from defrost problems. These symptoms often trace back to a few serviceable parts and basic maintenance checks in the owner's manual.

• No ice or small/hollow cubes: restricted water supply, clogged filter, or a weak inlet valve
• Water dispenser slow or not dispensing: clogged filter, frozen water tube, or reservoir issue
• Freezer cold but refrigerator warm: airflow problem (diffuser) or evaporator fan issue
• Heavy frost on freezer back wall: defrost system problem (heater or defrost thermostat)
• Door not closing well or warm air leaks: worn gasket or door cam wear

1. Confirm freezer is set cold enough for ice production (most units do best near 0°F).
2. Replace the water filter if flow is reduced or it is older than 6 months: refrigerator water filter EDR3RXD1.
3. Inspect the freezer rear panel for frost; a solid frost sheet strongly indicates a defrost issue.
4. Listen for the evaporator fan; it should run when the compressor is running and the door switch is closed.
5. Check door sealing all the way around; gaps cause frost, sweating, and temperature swings.

Catching these issues early protects food temperatures, reduces compressor run time, and prevents secondary damage like ice buildup around the evaporator or water leaks at the dispenser.

Last updated: March 2026