Owner’s manual
Error Codes
How many cubic feet is my Kenmore refrigerator model 10659126801?
Kenmore side-by-side refrigerator model 10659126801 has a total capacity of 25.6 cubic feet. You can also confirm the exact capacity on the refrigerator’s rating label inside the fresh food compartment and in the specifications section of the 10659126801 owner's manual.
- Open the fresh food (refrigerator) door and look along the side walls near the crisper area.
- Check near the ceiling light housing or behind the lower kickplate area (varies by build).
- Match the full model number 10659126801 exactly; similar 106-series models can have different capacities.
- If the label is worn, take a clear photo and zoom in to read the printed specs.
| Spec | Value |
|---|---|
| Total capacity | 25.6 cu. ft. |
| Refrigerator style | Side-by-side |
| Best confirmation source | Rating label, then manual |
Capacity affects how you plan shelf space, bin organization, and airflow. Keeping vents clear and avoiding overpacking helps the evaporator fan circulate cold air evenly and prevents warm spots.
If you use the dispenser, replace the filter on schedule and flush the system after installation. For this model, a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.
Last updated: January 2026
What are the most common issues with 10659126801?
The most common issues we see with the Kenmore 10659126801 side-by-side refrigerator involve weak cooling or frost buildup, water dispenser or ice maker failures, and door sealing or closing problems. These symptoms usually trace back to airflow, defrost, or water-supply components and are often straightforward to diagnose.
- Not cooling well (fresh food warm, freezer OK or both warm): dirty condenser area, evaporator fan issue, thermostat/control issue
- Frost buildup on the freezer back wall: defrost system problem (bi-metal thermostat, adaptive defrost control)
- No ice or slow ice production: clogged filter, low water pressure, inlet valve problem, ice maker issue
- Water dispenser not dispensing: filter restriction, frozen water tube, inlet valve problem
- Doors not closing or popping open: worn door cam, misalignment, gasket not sealing
- Set controls to normal mid-range and give the unit 24 hours to stabilize.
- Confirm strong airflow from the freezer vents; blocked vents cause warm spots.
- If ice and water are both weak, replace the filter and purge air from the line.
- Inspect door seals for gaps and clean the gasket sealing surface.
- Listen for the evaporator fan running when the freezer door switch is pressed.
| Symptom | Common suspect part | Example part on this model page |
|---|---|---|
| No water and no ice | Water inlet valve | Refrigerator water inlet valve W10408179 |
| Bad-tasting water, slow dispense | Water filter | Genuine Kenmore refrigerator water filter EDR3RXD1 |
| Frost buildup, warm temps | Defrost sensing issue | Refrigerator bi-metal thermostat WPW10225581 |
| Ice maker not cycling | Ice maker assembly | Refrigerator ice maker WPW10190965 |
| Door not closing smoothly | Door cam wear | Refrigerator door cam (black) WP2182179 |
Cooling, defrost, and water-delivery problems can cascade; for example, a restricted filter can strain the inlet valve, and a defrost failure can block airflow and make the refrigerator section warm. Catching the root cause early helps protect food and prevents repeat failures.
For model-specific operating details and control settings, use the owner's manual.
Last updated: March 2026
What is the code er 1f on a Kenmore Elite refrigerator?
On Kenmore model 10659126801, the ER 1F error points to a problem with the freezer evaporator fan circuit (often the ice room or evaporator fan feedback). Restoring airflow usually requires checking the fan, wiring connections, and in some cases the electronic control.
- Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
- Confirm the freezer door closes tightly and nothing is blocking vents.
- Listen for the evaporator fan: it should run when the compressor is running and the door switch is closed.
- Look for heavy frost on the freezer back wall (a defrost problem can stop airflow and trigger fan-related errors).
- If you recently replaced the water filter, flush the water system per the 10659126801 owner's manual (this does not cause ER 1F, but it prevents dispenser issues after service).
ER 1F is most often caused by one of these issues:
- Evaporator fan problem: failed fan motor or damaged fan blade.
- Ice buildup: fan blades hitting ice, or airflow blocked by frost.
- Loose or damaged wiring: harness connection at the fan or control.
- Control issue: adaptive defrost control board or main control not reading fan feedback correctly.
If the fan blade is cracked or wobbling, replacing the blade can restore airflow (see refrigerator evaporator fan blade WP2169142).
| What you notice | What it usually means | What we check/replace |
|---|---|---|
| Loud buzzing or ticking from freezer | Fan blade hitting ice or warped blade | Defrost issue, fan blade |
| No airflow in freezer, warm fridge side | Evaporator fan not running | Fan circuit, wiring, control |
| Heavy frost on freezer back panel | Defrost system problem | Defrost controls/sensors |
| Error returns after reset | Ongoing fan feedback or control fault | Fan circuit, control board |
The evaporator fan moves cold air through the freezer and into the fresh food section. When the fan circuit fails or airflow is blocked, temperatures rise, ice production drops, and the refrigerator can run longer than normal.
For step-by-step troubleshooting patterns that match Kenmore 106-series designs, use Kenmore 106 model refrigerator error codes.
Last updated: January 2026
