Kenmore 10658422700 side-by-side refrigerator Parts

Kenmore model numbers use a 3-digit prefix to identify the original manufacturer, followed by digits that identify the base design and the specific feature or production variation. For your Kenmore side-by-side refrigerator model 10658422700, the 106 prefix is the key identifier to start with; confirm the full model and serial details in the 10658422700 owner's manual.

Most Kenmore refrigerator model numbers follow this pattern:

• First 3 digits: manufacturer prefix (example: 106)
• Next digits: base model platform (design family)
• Last digits: version or feature variation (color, options, production run)

We use the complete model number to match parts that fit your exact refrigerator configuration. Even small digit changes can affect compatibility for items like:

• Refrigerator water filter and filter cap
• Ice maker and ice bin
• Water inlet valve
• Door gasket and door closer parts
• Defrost heater and defrost thermostat components

• Match all digits in 10658422700, not just the 106 prefix
• Use the model number when selecting common maintenance parts (water filter, light bulb)
• If you are troubleshooting water or ice issues, check the troubleshooting and specifications sections in the 10658422700 owner's manual

Reading the model number correctly is the fastest way to get the right Kenmore refrigerator parts the first time, especially for fit-sensitive items like an ice maker, water filter housing parts, or door seals.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10658422700, a bad compressor usually shows up as poor cooling with long run times, repeated clicking as it tries to start, or abnormal compressor heat. Because this model can normally run longer and make pulsating sounds, we confirm failure by separating normal operation from true no-cool symptoms.

• Verify the temperature controls are turned on and set correctly (not OFF). See the 10658422700 owner's manual.
• If this is a new install or recent move, allow 24 hours for full cool-down.
• Listen for normal sounds: a pulsating/high-pitched sound can be normal as the compressor and fans adjust.
• Check door closing and airflow: blocked vents or frequent door openings can mimic compressor trouble.
• Clean condenser area and confirm the condenser fan (if equipped) is running.

We often rule these out first because they are more common than compressor failure:

• Defrost system problems (ice buildup restricting airflow), including the refrigerator defrost bi-metal WPW10225581 and refrigerator heater WP2323198
• Temperature control issues such as the refrigerator thermostat WP2198202
• Evaporator fan problems (cold air not circulating)

A compressor replacement is a major repair; confirming basics like control settings, normal operating sounds, and airflow prevents unnecessary parts replacement and gets you to the real cause faster.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10658422700 are cooling issues, water leaks, ice maker or dispenser failures, and unusual noises. These problems usually trace back to airflow restrictions (dirty coils or a stalled fan), defrost system trouble, or water supply and filter issues.

• Not cooling or warm temperatures: dirty condenser coils, evaporator fan not running, or frost buildup from a defrost failure
• Water leaking or puddles: clogged defrost drain, loose water line connection, or a leaking valve
• Ice maker not making ice: restricted water flow (filter), low water pressure, or a failing ice maker
• Water dispenser slow or not dispensing: clogged filter, frozen water line, or inlet valve problem
• Buzzing, rattling, or clicking: fan blade hitting ice, loose panels, or compressor start components struggling

1. Confirm temperatures: set fresh food to about 37°F and freezer to about 0°F.
2. Check airflow: make sure vents inside aren’t blocked by food packages.
3. Clean condenser coils: dust buildup is a top cause of poor cooling and long run times.
4. Inspect door sealing: look for gaps, torn gasket areas, or doors not closing fully.
5. Verify water supply: this model’s water system is designed for 30 to 120 psi supply pressure.

Catching the root cause early protects food, reduces energy use, and prevents secondary damage (for example, a small airflow problem can turn into heavy frost buildup and warmer temperatures).

Use the 10658422700 owner's manual for temperature settings, water supply requirements, and operating checks that match your exact Kenmore side-by-side configuration.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10658422700 has a total capacity of about 21.9 cubic feet. This is the overall interior volume for both the fresh food (refrigerator) and freezer sections combined; see the 10658422700 owner's manual for model-specific details.

We use total cubic feet to help you compare storage space and choose correctly sized replacement items (like bins and shelves) for your Kenmore refrigerator.

• Compare overall storage between similar side-by-side models
• Estimate how much weekly grocery volume fits comfortably
• Plan organization zones (deli/meat pan, crisper, freezer bin)
• Confirm fit when replacing interior storage parts

Capacity affects airflow and temperature stability. Overpacking a side-by-side can block vents and cause warm spots, frost buildup, or slow ice production. The best day-to-day performance comes from keeping vents clear and using the storage features as intended in the 10658422700 owner's manual.

Last updated: February 2026

Most Kenmore refrigerators last 12 to 15 years with normal household use. For your Kenmore 10658422700 side-by-side refrigerator, consistent cleaning, good airflow around the cabinet, and staying on top of wear items (like water filters and door seals) helps you reach that typical lifespan.

• Condenser coil cleanliness (dust buildup makes the compressor work harder)
• Door seal condition (warm air leaks increase run time and frost)
• Ventilation space around the refrigerator (prevents overheating)
• Stable temperatures (fresh food about 37°F, freezer about 0°F)
• Water system upkeep (filter changes and leak prevention)

Use the maintenance and care guidance in the 10658422700 owner's manual and follow this routine:

If you are troubleshooting weak water flow, warm temps, or ice maker issues, these model-matched parts are common suspects:

• Genuine Kenmore refrigerator water filter EDR3RXD1 (restricted filter can reduce flow)
• Refrigerator inlet valve W10408179 (can cause no water, slow fill, or intermittent ice)
• Refrigerator thermostat WP2198202 (temperature control problems)

A refrigerator that runs longer than it should uses more electricity and wears out key sealed-system and cooling components faster. Simple upkeep, especially airflow and door sealing, is the difference between an early failure and getting the full 12 to 15 years.

Last updated: February 2026

On the Kenmore 10658422700 side-by-side refrigerator, the water filter is located in the base grille below the freezer compartment door; you remove it by pressing the eject button and pulling the filter straight out.

• Look at the bottom front of the refrigerator for the base grille.
• Find the filter cap and the eject button in the grille area.
• Press the eject button.
• Pull the filter straight out (avoid twisting the cap).
• Expect a small amount of water to spill from the old filter.

If your model uses a filter status light, reset it after replacing the cartridge (the manual describes holding the reset button for about 2 seconds).

• Genuine Kenmore refrigerator water filter EDR3RXD1
• Refrigerator water filter cap (black) WP2260518B

A correctly installed, fully seated water filter helps maintain normal water dispenser flow and ice maker fill. It also reduces the chance of leaks at the filter cap and helps prevent off-taste or discoloration caused by an unflushed new filter.

For model-specific steps and illustrations, follow the 10658422700 owner's manual.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10658422700, the model number is printed on the appliance identification label (the same label that lists the serial number). You will typically find this label inside the fresh food compartment, around the door opening area.

Look for a white or silver sticker label in these spots:

• Inside the refrigerator section on the left wall near the top shelf
• Inside the refrigerator section on the right wall near the crisper area
• On the front frame (mullion) behind the refrigerator door, near the hinges
• Occasionally on the ceiling of the fresh food compartment

For the exact label location and what the label looks like for your unit, use the 10658422700 owner's manual.

The label usually includes both a model number and a serial number.

Kenmore side-by-side refrigerators can look similar across many model families. Using the exact model number (like 10658422700) prevents ordering the wrong parts, such as a refrigerator water filter, ice maker, or water inlet valve.

Last updated: February 2026

Kenmore refrigerators made by Whirlpool are typically identified by the model number prefix; if the model number starts with 106, it is a Whirlpool-built Kenmore. Your Kenmore 10658422700 is in that Whirlpool-manufactured family, so Whirlpool-style parts and service procedures commonly apply (confirm details in the 10658422700 owner's manual).

Look at the first three digits of the Kenmore model number (the prefix). Common Whirlpool-built Kenmore prefixes include:

• 106 (very common for Kenmore side-by-side refrigerators)
• 110
• 665
• 198
• 552

When a Kenmore refrigerator is Whirlpool-built, you will often see Whirlpool-style component designs and part numbering. For Kenmore 10658422700, that matters most when you are ordering maintenance parts such as filters, valves, and ice maker components.

• Use the exact model number 10658422700 when searching parts
• Match parts by part ID and description, not just by appearance
• Follow the water system specs and procedures in the manual before replacing water-related parts
• If you have dispenser or ice maker symptoms, start with filter condition and water supply checks

Knowing the Whirlpool-built Kenmore prefixes helps you troubleshoot faster and order the correct replacement parts the first time. It also helps you use the right service instructions for features like the water filtration system, ice maker, and dispenser.

Last updated: February 2026

If your Kenmore side-by-side refrigerator model 10658422700 ice maker is not making ice, the most common causes are the ice maker being switched off (wire shutoff arm up), no water supply to the ice maker, or the freezer not cold enough. Use the steps below to pinpoint the failure quickly using the 10658422700 owner's manual.

• Confirm the wire shutoff arm is down (ON). If the bin is full, cubes lift the arm to OFF automatically.
• Make sure the freezer door closes completely; an open door can stop ice production.
• Wait the right amount of time: allow 24 hours for the first ice after setup; discard the first 3 batches.
• If ice is slow, set the freezer control slightly colder (half-step changes) and wait 24 hours between adjustments.
• Avoid a softened water supply when possible; it can lead to poor ice quality and damage over time.

A restricted water path can stop the ice maker from filling.

• Check the household shutoff valve is fully open and the supply line is not kinked.
• If water spurts or the dispenser sputters, flush air from the system by dispensing water in 5-seconds-on, 5-seconds-off cycles for about 2 minutes.
• Replace a clogged filter and flush afterward; for this model, the compatible filter is the genuine Kenmore refrigerator water filter EDR3RXD1.

If the shutoff arm is ON and water flow is good, a failed water valve can prevent filling. For model 10658422700, the common fill component is the refrigerator inlet valve W10408179.

An ice maker that is starved for water or running warm can also cause clumping, dispenser jams, and inconsistent cube size. Restoring correct freezer temperature and steady water flow prevents repeat problems.

Last updated: February 2026