Kenmore 10651332710 refrigerator Parts

Kenmore model numbers tell us the appliance type and the manufacturing source, which helps us match the correct parts and service information. For your Kenmore side-by-side refrigerator model 10651332710, the 106 prefix identifies the manufacturing source, and the remaining digits narrow it down to the exact design and features.

Where to find the model number on a refrigerator

On most Kenmore side-by-side refrigerators, we find the model and serial tag in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the refrigerator compartment near the light
• On the door frame behind the crisper drawers
• Behind the toe grille or on the back panel (less common)

How to break down a Kenmore model number

Kenmore model numbers are usually read in sections. Here is the practical way we use them when selecting parts.

Section	Example (10651332710)	What it tells us	Why it matters
Prefix	106	Manufacturing source code	Determines which parts system and designs apply
Base model	5133	Core platform/series	Narrows to a specific refrigerator family
Variation	2710	Feature and revision details	Helps match exact bins, controls, and ice maker versions

Why the exact model number matters for parts

Small number changes can mean different door bins, control boards, ice maker styles, or water system layouts. Using the full model number prevents ordering a part that fits a similar Kenmore 106 refrigerator but not yours.

• Use the full model number when searching parts
• Match the model number exactly, character for character
• If your tag shows a dot format (example: 106.5133*), use the full number from the tag when ordering

Use the manual to confirm your series and features

Your Use and Care Guide lists the model family as 106.5133* (the asterisk represents a color code). We use that to confirm the correct series before choosing parts or troubleshooting steps. See the 10651332710 owner's manual for the model family format and feature overview.

Common example: ice and water components vary by model

Even within the Kenmore 106 family, ice maker and water parts can differ. If you are troubleshooting ice production or water dispensing, matching by model number is the first step before replacing parts like the refrigerator ice maker W10873791 or the refrigerator water inlet valve WPW10179146.

Last updated: February 2026

For the Kenmore side-by-side refrigerator model 10651332710, plan on a 36-inch cabinet cutout width for installation; that is the standard opening width called out for this model family. For exact overall exterior width (case and doors), confirm the dimensions in the 10651332710 owner's manual.

What the width number really means

Refrigerator “width” can refer to different measurements. Here is how we recommend thinking about it:

• Cabinet cutout width: the minimum opening needed to slide the refrigerator into place
• Overall case width: the refrigerator body, not counting door swing clearance
• Door and handle projection: how far doors and handles extend into the room
• Door swing clearance: extra side space so doors open fully next to a wall
• Service clearance: space behind and above for airflow and hookups

Model 10651332710 installation width and clearances

The Use and Care Guide for Kenmore 106.5133* models specifies these planning numbers:

Planning item	What to allow	Why it matters
Minimum cabinet cutout width	36 in	Fits the refrigerator into the opening
Side and top clearance	1/2 in each side and top	Helps ventilation and cooling performance
Rear clearance	2 in	Room for airflow and water line connections
Extra opening width (if against extended wall and you want crisper removal)	54 in recommended	Allows crisper pans to slide out without interference

Quick measuring tips before you buy or replace

• Measure the opening width at the front and back; older cabinets can be out of square.
• Measure doorway and hallway widths on the delivery path.
• Account for door swing if the refrigerator sits next to a fixed wall.
• Leave the recommended rear clearance if you have an ice maker water line.
• If you need crispers to pull out fully, plan for the wider opening noted above.

Why it matters

If the opening is too tight, the refrigerator can run warmer, make more noise, and be harder to level and align. Proper width and clearance also helps prevent door seal gaps and airflow restrictions.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10651332710 has a total capacity of 21.9 cubic feet. This is the combined storage volume of the fresh food and freezer compartments.

Where to confirm the capacity for your exact version

Kenmore model numbers in this series can include a color code (often shown like 106.5133*). For the most accurate confirmation for your specific unit, check the model identification section and specifications in the 10651332710 owner's manual.

Why cubic feet matters

Capacity helps you compare storage space and also sets expectations for cooling performance and organization. A 21.9 cu. ft. side-by-side typically supports standard family grocery loads, but usable space depends on shelves, bins, and the ice system.

Quick tips to maximize usable space

• Keep air vents clear so cold air circulates properly
• Set refrigerator items in bins and avoid overpacking shelves
• Use door bins for condiments, not milk or eggs (door temps fluctuate more)
• Keep the freezer organized so the ice bucket and auger area do not jam
• Clean spills quickly to prevent odors and airflow restrictions

Capacity at a glance

Spec	What it means	For model 10651332710
Total capacity	Fridge + freezer volume	21.9 cu. ft.
Style	Door layout	Side-by-side

Related parts that affect usable space

If you are losing storage due to broken bins or drawers, replacing the damaged component restores organization and helps prevent blocked vents.

• Refrigerator door bin W11174793 (common for cracked or missing door storage)
• Refrigerator crisper pan W11174619 (helps keep produce organized and contained)

Last updated: February 2026

Most Kenmore refrigerators, including side-by-side models like 10651332710, typically last 12 to 15 years with normal household use. Regular maintenance (especially cleaning condenser coils and keeping door gaskets sealing tightly) is what most often determines whether you land closer to 12 years or push beyond 15.

Typical lifespan and what affects it

A refrigerator’s life is mainly driven by compressor run time, airflow, and how hard the sealed system has to work to hold temperature.

• Maintenance level: clean coils, clear vents, replace filters on schedule
• Door seal condition: torn or warped gaskets force longer run times
• Room conditions: hot garages and tight built-ins shorten life
• Usage habits: frequent door openings, overpacking, warm food loads
• Water and ice system health: leaks and valve issues can create secondary damage

Maintenance checklist that extends life

Use the care and maintenance guidance in the 10651332710 owner's manual as your baseline, then follow these practical steps.

• Vacuum condenser coils and the grille area every 6 to 12 months
• Keep interior air vents unblocked (especially near the evaporator cover)
• Confirm doors close on their own and sit level after moving the unit
• Clean and inspect door gaskets; replace if they are cracked or not sealing
• Watch for slow ice production or weak water flow (often points to supply or valve issues)

Quick guide: what “normal aging” looks like

Symptom	Common cause	What to check first
Runs longer than it used to	Dirty coils, weak door seal	Coil cleaning, gasket inspection
Frost buildup in freezer	Air leak, defrost issue	Door seal, defrost system
Warm fridge, freezer OK	Airflow problem	Evaporator fan operation
Water under fridge	Drain or water supply issue	Drain path, water line/valve

Why it matters

A Kenmore side-by-side that is maintained well usually avoids the most expensive failures (sealed system strain, compressor overwork). Small fixes like restoring airflow and sealing can add years of reliable cooling.

Last updated: February 2026