Maytag MSD2542VEB01 side-by-side refrigerator Parts

Yes. For your Maytag MSD2542VEB01, “fridge” and “refrigerator” mean the same appliance; “fridge” is simply the common nickname people use for “refrigerator,” including side-by-side models with a freezer section.

People use both words interchangeably, but you may hear “refrigerator” more often in manuals and parts diagrams.

• Fridge: everyday shorthand for refrigerator
• Refrigerator: the formal name used in documentation and service info
• Side-by-side refrigerator: a refrigerator style with fresh food on one side and freezer on the other
• Freezer: the compartment that keeps food frozen (part of many refrigerators)

For this model, the official documentation and safety instructions use the word “refrigerator,” especially for installation, electrical requirements, and moving the unit. Check the MSD2542VEB01 owner's manual for the exact terminology and safety steps.

Using the word “refrigerator” when searching parts and troubleshooting helps you match the language used in Maytag documentation, which makes it easier to find the right procedures and safety guidance for MSD2542VEB01.

Last updated: February 2026

For your Maytag side-by-side refrigerator model MSD2542VEB01, the model and serial number are printed on a label inside the refrigerator compartment; it is located on the right-hand interior wall (right-hand side of the refrigerator interior). See the MSD2542VEB01 owner's manual for the exact label location callout.

• Open the fresh food (refrigerator) door, not the freezer door
• Look along the right interior wall of the refrigerator compartment
• Check near the front edge where the door gasket seals
• Use a flashlight; the label can be small or slightly reflective
• Write down the full model number and serial number exactly as shown

• Record the entire model number, including all letters and numbers.
• Do not use a shortened “series” name; parts lookups require the full model.
• If the label is hard to read, take a photo and zoom in.

Using the correct model number ensures we match the right Maytag parts for your refrigerator, such as the correct water filter, ice maker, inlet valve, or thermostat.

Last updated: February 2026

Most Maytag refrigerators, including the Maytag MSD2542VEB01 side-by-side refrigerator, typically last 10 to 15 years. With consistent maintenance (cleaning, good airflow, and quick repairs), it’s common for a refrigerator to reach 15 to 20 years of service.

A refrigerator’s life is usually determined by how hard the sealed system and airflow components have to work.

• Condenser coil cleanliness: dust buildup makes the compressor run hotter and longer
• Airflow inside the cabinet: blocked vents cause temperature swings and longer run times
• Door seal condition: air leaks add moisture and force longer cooling cycles
• Water and ice system upkeep: reduces leaks, clogs, and valve wear
• Stable temperatures: avoiding frequent warm-ups helps the compressor and defrost system

We recommend these habits for the MSD2542VEB01:

• Vacuum and brush the condenser area regularly
• Keep food from blocking return vents in the fresh food and freezer sections
• Confirm the freezer stays near 0°F and the refrigerator near 37°F
• Replace the water filter on schedule; follow the steps in the MSD2542VEB01 owner’s manual
• Address small issues early (noisy fan, warm spots, frost buildup)

Many problems that feel like “the fridge is dying” are actually repairable with common parts.

If you’re troubleshooting water flow or ice issues, the refrigerator inlet valve W10408179 is a common wear item in this system.

Knowing the typical lifespan helps you decide whether to maintain, repair, or replace. A well-maintained Maytag side-by-side often just needs targeted repairs (like a valve, thermostat, or fan motor) to keep cooling reliably.

Last updated: February 2026

For a Maytag side-by-side refrigerator like model MSD2542VEB01, overall dimensions vary by model and installation clearances; most full-size Maytag refrigerators are roughly 62 to 72 inches tall, 29 to 36 inches deep, and 24 to 40 inches wide. For the exact MSD2542VEB01 measurements, use the MSD2542VEB01 owner's manual.

Measure with doors closed, then confirm you have enough room to move the unit into place.

• Height: floor to top of cabinet (include hinge cover if it sits higher)
• Width: cabinet edge to cabinet edge (not just door handles)
• Depth: front of cabinet to back (then note a second depth with handles if needed)
• Door swing clearance: space needed for doors to open fully
• Ventilation clearance: space behind and above for airflow

These are common “shopping ranges” for full-size refrigerators; your MSD2542VEB01 can fall within them depending on configuration.

Correct dimensions prevent delivery problems, door interference, and poor cooling from restricted airflow. Getting the right clearances also helps the ice maker and water dispenser lines route without kinks.

If you are disconnecting and reconnecting water, plan to flush and check for leaks afterward.

• Replace the water filter after a move if flow is slow or taste is off
• Inspect the water line for kinks and cracks
• Verify the shutoff valve fully opens
• Level the refrigerator so doors close and seal properly

If you are also replacing the filter, follow how to replace the water filter in a Maytag refrigerator and use the correct filter for this model, such as the refrigerator water filter EDR3RXD1.

Last updated: February 2026