Kenmore 79094342700 electric range Parts

On the Kenmore electric range model 79094342700, the model and serial number are printed on an identification (serial) plate located on the right side of the oven front frame, inside the storage or warmer drawer compartment. Use the plate info when ordering parts or scheduling service; see the 79094342700 owner's manual.

Where to look on model 79094342700

Pull the bottom drawer out and look along the right side of the oven front frame.

• Open the storage drawer (some models) or warmer drawer (some models)
• Look for a silver or white identification plate with printed text
• Check the right side of the front frame (not the back panel)
• Record both the model number and serial number for your records
• Use a flashlight; the plate can be easy to miss in low light

Quick checklist: what you should write down

Item	Example format	What it’s used for
Model number	790.94342700 (may appear with a dot)	Matching the correct diagrams and parts
Serial number	Letters and numbers	Determining production details for service
Purchase date	Month/day/year	Warranty and service history

Why it matters

We use the exact model number to match the correct Kenmore range parts and wiring layout. Even small model variations can change which surface element control switch, oven temperature sensor, or control overlay fits.

Last updated: January 2026

Most Kenmore electric ranges, including model 79094342700, are built in the standard 30-inch width class so they fit common kitchen cutouts. For the exact cabinet opening and clearance requirements for your specific unit, use the owner's manual.

Typical Kenmore range widths (what you will usually see)

Most Kenmore ranges fall into these common size groups:

• 30 inches: the most common freestanding and slide-in range width
• 24 inches: compact ranges for smaller kitchens
• 36 inches: pro-style or larger cooking surfaces (less common)

Nominal width class	Typical actual width	Best for
24-inch	About 23 1/2 to 24 inches	Apartments, tight spaces
30-inch	About 29 7/8 to 30 inches	Most standard kitchens
36-inch	About 35 7/8 to 36 inches	Larger kitchens, more burners

How to confirm the correct width for model 79094342700

We recommend confirming both the appliance width and the required opening width (they are not always identical).

• Measure the range body at the widest point (usually the cooktop edge)
• Measure the cabinet opening between the countertops
• Check required side clearances and rear clearance
• Confirm the anti-tip bracket location and fit before final placement

Why it matters

Range width affects fit, ventilation clearances, and safe installation. A range that is even slightly too wide can bind against cabinets, and incorrect placement can prevent the anti-tip bracket from engaging properly.

Last updated: January 2026

To reset a Kenmore electric range model 79094342700, we recommend doing a full power reset: turn the range off, shut off power at the circuit breaker (or remove the fuse) for 1 to 5 minutes, then restore power and reset the clock and any oven settings per the 79094342700 owner's manual.

Quick reset steps (most common)

• Turn all surface element knobs to OFF.
• Turn the oven OFF (cancel any bake, broil, or self-clean cycle).
• Switch the range circuit breaker OFF (or remove the range fuse).
• Wait 1 to 5 minutes to clear the electronic oven control.
• Switch the breaker ON.
• Reset the clock and oven function.

If the reset is after a power outage

Your manual warns not to operate the range during a power failure; if power returns and the range was not turned off, it can begin operating again. After power is restored:

• Confirm all controls are OFF.
• Reset the clock.
• Re-select your desired oven function (Bake, Broil, Timer).

When a “reset” does not fix the problem

A reset clears many control glitches, but it will not correct a failed component. These symptoms often point to a part issue:

Symptom	Common cause	What to check next
Oven temperature is inaccurate	Sensor reading is off	Test/replace range oven temperature sensor 316490000
Broil does not heat	Broil element open or wiring issue	Inspect/replace range broil element 316203301
Oven light is out	Burned-out bulb	Replace range oven light bulb 316538904

Why it matters

Resetting by cutting power is the safest way to reboot the electronic oven control and helps prevent unexpected heating after an outage. It also confirms whether the issue is a temporary control lockup or a true heating, lighting, or sensor failure.

Last updated: January 2026

On Kenmore ranges like model 79094342700, error code F90 (often grouped with F9, F91 to F95) points to a problem with the self-clean door lock system, such as the door lock motor, latch, or lock switches not reaching the expected locked or unlocked position.

What to do first (safe reset and quick checks)

• Turn the range off and let the oven cool completely.
• Disconnect power at the breaker for 30 seconds, then restore power.
• If the oven is stuck after self-clean, wait for the lock to cool; the latch can stay engaged until temperatures drop.
• Try starting and canceling a short self-clean cycle only if the door is closed and the oven is cool.
• If the code returns, plan on inspecting the lock circuit and related parts.

Parts commonly involved with F90 on this model family

F90 is usually triggered when the control does not sense the door lock moving correctly.

Symptom you see	Most likely area	What it means
Door will not lock for self-clean	Door lock motor/latch	Lock is not engaging
Door will not unlock after self-clean	Door lock motor/switch	Lock is not returning home
F90 comes back immediately after reset	Lock switch circuit or control input	Control is not seeing a valid lock position

If you need the lock assembly used on this range, match it by model and symptom: oven door lock motor and switch assembly 5304528973.

Why it matters

During self-clean, the range uses a door latch to prevent the door from opening at high temperatures. When the latch motor or switches fail, the control protects you by stopping the cycle and posting an F90-series fault.

Where to confirm the exact meaning for your control

Kenmore 790-series ranges can display different F-code formats depending on the control style. We recommend checking the troubleshooting section in the 79094342700 manual and comparing the displayed code behavior.

You can also reference our model-family code list: Kenmore 790 self-cleaning range error codes.

Last updated: January 2026