Kenmore 10653082300 refrigerator Parts

Cleaning the condenser coils on your Kenmore side-by-side refrigerator model 10653082300 removes dust that blocks heat transfer, which helps the compressor run more efficiently and can reduce long run times. We recommend coil cleaning as routine maintenance, especially if you have pets.

• Unplug the refrigerator or disconnect power at the breaker.
• Pull the refrigerator straight out enough to work safely.
• Remove the base grille if your model uses one (the 10653082300 owner's manual shows how the grille and lower areas are accessed).
• Protect the floor with a towel or thin cardboard.
• Avoid bending or crushing the coil fins and tubing.

1. Locate the coils: On most side-by-side units, coils are either behind the base grille at the front or on the back of the cabinet.
2. Dry brush first: Use a coil brush or soft nylon brush to loosen packed dust and pet hair.
3. Vacuum thoroughly: Use a vacuum with a crevice tool to remove debris from the coil surface and surrounding areas.
4. Clean the condenser fan area (if accessible): Vacuum dust buildup near the fan and air passages.
5. Reinstall the base grille (if removed), then restore power.

• Every 6 months in most homes
• Every 3 months if you have pets or heavy dust
• After any remodeling or drywall work

Dirty condenser coils trap heat, so the sealed system has to work harder. That can lead to longer compressor run times, warmer temperatures, and higher energy use.

If you are also troubleshooting weak cooling or long run times, check the troubleshooting and cleaning guidance in the 10653082300 owner's manual. For broader parts and maintenance resources by model, use Sears PartsDirect.

Last updated: February 2026

A key disadvantage of a side-by-side refrigerator like Kenmore 10653082300 is reduced usable width in both compartments; wide platters and pizza boxes often do not fit as easily, and fresh-food items can be harder to see and reach because storage runs top-to-bottom.

• Narrow shelves in both the freezer and refrigerator sections limit wide items.
• More bending and scanning for fresh foods because items are spread vertically.
• Odor transfer can be more noticeable because air circulates between sections; odors in one side can move to the other.
• Airflow sensitivity: blocking vents with food can cause uneven temperatures.
• Door swing clearance: you need enough space for both doors to open fully.

The 10653082300 owner's manual explains that cold air circulates between the freezer and refrigerator sections and warns not to block vents with food. When vents are blocked, airflow is restricted and temperature controls cannot work properly. It also notes that odors can transfer between sections, so tightly wrapping foods helps.

• Keep frequently used fresh items at eye level.
• Do not pack food in front of the air vents.
• Store wide items on adjustable shelves when possible.
• Wrap strong-smelling foods tightly to reduce odor transfer.
• If doors do not close smoothly, level the refrigerator per the installation guide.

Most “side-by-side problems” are really storage-fit and airflow issues. When shelves are overloaded or vents are blocked, you can get warm spots, frozen produce, or faster spoilage, even when the thermostat setting looks correct.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10653082300, the model and serial number label is located on the inside wall of the refrigerator (fresh food) compartment. Open the fresh food door and look along the interior side walls near the front for the identification tag; record both numbers for parts and service.

• Open the refrigerator (fresh food) door, not the freezer door
• Check the inside wall of the refrigerator compartment
• Look near the front edge where the door gasket meets the cabinet
• Scan both left and right interior side walls
• Use a flashlight; the print can be small or lightly stamped

We recommend recording these items exactly as shown on the tag:

The model number narrows your refrigerator to the correct parts list, diagrams, and installation details. That prevents ordering the wrong items when you are replacing common components like an ice maker, water inlet valve, thermostat, or door hardware.

• Use the 10653082300 owner's manual to confirm the label location and keep a record of your model and serial number.
• If you are ordering parts, start with the parts list for model 10653082300 on this page; you can also search by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; for the exact cabinet width of model 10653082300, we recommend checking the dimensions section in the 10653082300 owner's manual because width can vary by capacity and door style.

Side-by-side refrigerators commonly fall into these width bands:

• 32 to 33 inches: space-saving and some older or smaller-capacity models
• 35 to 36 inches: most full-size side-by-side models
• 36+ inches: larger-capacity or premium configurations

Even if the cabinet width fits, you still need room for airflow and door swing. For this Kenmore side-by-side, the installation guidance calls for ventilation space and added side clearance when next to a wall.

• Plan for about 1/2 inch of space on each side and at the top for ventilation
• If installed next to a fixed wall, allow about 2 inches minimum on the wall side (door swing clearance varies by setup)
• If the unit has an ice maker, leave extra room at the back for the water line

Measure in three places and use the largest measurement:

• Cabinet width (main box, not including doors/handles)
• Door and handle projection (often the widest point)
• Space between cabinets/walls at the front and at the back (floors and walls are rarely perfectly square)

Getting the width right prevents door interference, improves airflow around the condenser area, and helps avoid installation headaches like pinched water tubing or a base grille that will not sit correctly.

If you are planning a water hookup or troubleshooting low ice production, the refrigerator inlet valve W10408179 is one of the common water-supply components used on this model.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 10653082300 are cooling problems, ice maker or water dispenser failures, leaks, unusual noise, and frost buildup. Many of these trace back to airflow restrictions, a defrost problem, or a water supply component that is clogged or failing.

• Not cooling or warm temperatures: confirm vents are not blocked; clean condenser area; verify doors seal and close fully.
• Ice maker not making ice: confirm the shutoff arm is down (on arm-style units); check water supply; look for frozen fill tube.
• Water dispenser weak or not dispensing: replace the filter on schedule; check for kinked tubing.
• Water leaking: inspect water lines and connections; check for ice buildup around the drain area.
• Noisy operation: listen for fan-related noise; check for ice contacting the evaporator fan area.
• Frost buildup: points to a defrost system issue or door sealing problem.

If your troubleshooting points to a failed component, these model-compatible parts are common fixes:

Catching the root cause early helps protect food, reduces compressor run time, and prevents secondary damage (for example, a small airflow issue turning into heavy frost and poor cooling).

Use the troubleshooting and care sections in the owner's manual for Kenmore 10653082300 to match symptoms to checks like cleaning, door gasket care, and basic diagnostics.

For ordering, use the parts list for model 10653082300 on this page, or search by model number on Sears PartsDirect.

Last updated: February 2026