Kenmore 25370812710 top-mount refrigerator Parts

Kenmore model 25370812710 is a top-mount refrigerator, not an upright freezer. Its exact cubic-foot capacity is listed on the model’s rating information and in the 25370812710 owner’s manual; use that value when comparing storage size or planning kitchen space.

We recommend using the model-specific documentation because Kenmore “253” models cover multiple sizes.

• Check the specifications section in the 25370812710 owner’s manual.
• Look for the model and serial plate inside the fresh food compartment (the manual notes it is located inside the refrigerator compartment).
• If you see a capacity listed in liters, convert to cubic feet (1 cu. ft. = 28.3 L).
• Use the full model number 25370812710 when searching specs; similar 253.7081* models can differ by size.

Capacity affects food storage planning, energy use expectations, and whether shelves, bins, and accessories fit your needs. It also helps when ordering storage parts like a crisper drawer 240337103 or door bins.

• If doors do not seal well after moving the unit, inspect the gasket contact all the way around.
• Keep vents clear so cold air can circulate between compartments.
• If you are troubleshooting display or cooling issues, use the Kenmore 253 series french door refrigerator error codes guide as a starting point for Kenmore 253-series diagnostics.

Last updated: January 2026

The most common issues we see with the Kenmore 25370812710 top-mount refrigerator are warm temperatures (often from airflow or defrost problems), frost buildup in the freezer, water leaking, noisy operation, and ice maker problems. Many of these symptoms trace back to a few serviceable parts and basic maintenance checks in the owner's manual.

• Freezer cold but refrigerator warm: restricted airflow, iced-over evaporator area, or a weak evaporator fan.
• Heavy frost on freezer back wall: defrost system problem (heater or defrost thermostat).
• Water under crisper or on floor: clogged/iced defrost drain.
• Buzzing, rattling, or clicking: fan blade hitting ice, condenser fan noise, or start components.
• No ice or small cubes: ice maker issue, temperature too warm, or water supply problem.

If your symptoms match, these are frequent replacements for this model:

• Set controls to the recommended mid-range settings in the manual.
• Make sure vents are not blocked by food packages.
• Confirm the doors close fully and the gasket seals all the way around.
• Clean dust from the condenser area and confirm the condenser fan runs.
• If frost is present, unplug and fully defrost; if it returns quickly, focus on the defrost system.

Temperature and frost issues can lead to spoiled food and extra compressor run time. Catching airflow, gasket, and defrost problems early helps the refrigerator cool correctly and reduces wear on major components like the compressor.

Last updated: March 2026

Kenmore model 25370812710 is a Kenmore-branded top-mount refrigerator built for Sears, and the 253 model prefix identifies it as a unit manufactured by Frigidaire (Electrolux/Frigidaire). You will often see Frigidaire-sourced components used on this model.

Kenmore appliances are sold under the Kenmore brand, but the actual manufacturer is commonly identified by the model prefix.

• Model prefix: 253
• Brand on the door: Kenmore
• Manufacturer behind the 253 prefix: Frigidaire (Electrolux/Frigidaire)
• Why it matters: it helps match the correct replacement parts and service procedures

Because 253-series Kenmore refrigerators are Frigidaire-built, many replacement parts and troubleshooting steps align with Frigidaire-style designs.

• Use the full model number 25370812710 when ordering parts
• Expect common Frigidaire-style components (ice maker, door gasket, defrost heater)
• Follow the model-specific procedures and diagrams in the 25370812710 owner's manual
• Use the installation guide for leveling, door alignment, and setup details

Knowing that Frigidaire makes Kenmore 253-series refrigerators helps you choose compatible parts faster and use the right diagnostic approach for cooling, defrost, and ice maker issues.

Last updated: January 2026