Kenmore 58765820 200 automatic portable dishwasher Parts

Yes, repairing a Kenmore dishwasher like model 58765820 is worth it when the fix is a common wear item or a small mechanical issue; it is usually not worth it when the repair cost is high relative to the dishwasher’s age and overall condition.

Quick way to decide (cost vs. age)

Use this simple rule of thumb for a portable dishwasher repair decision.

• Worth repairing when the issue is a small part, a leak you can access, or a rolling/leveling problem
• Worth repairing when the dishwasher is otherwise cleaning and draining normally
• Consider replacing when multiple major symptoms stack up (no drain, no fill, no heat, loud motor)
• Consider replacing when the repair requires major disassembly and multiple parts
• Repair first if the problem is mobility related (portable units often fail at wheels/casters)

Dishwasher age	Typical “repair” range	Typical “replace” trigger
0 to 5 years	Most repairs make sense	Only if major electrical failure
6 to 10 years	Repair if cost is modest	If repair is expensive or recurring
11+ years	Repair only for small fixes	Major pump, motor, or control issues

Repairs that commonly make sense on this model

For Kenmore 58765820, a practical example is restoring portability and stability by replacing a worn wheel/caster. If your unit is hard to roll, sits unevenly, or the wheel is cracked, replacing the caster 5300808972 is a straightforward, cost-effective repair.

Why it matters

A targeted repair can extend the life of your dishwasher, reduce leaks and vibration, and keep a portable unit easy to move and connect. Replacing the right part also prevents secondary damage (for example, a wobbly base stressing hoses and fittings).

Last updated: February 2026

Yes. We still carry replacement parts for many Kenmore dishwashers, including Kenmore model 58765820. The key is matching parts to your exact model number so the fit and connections are correct for your dishwasher’s racks, door, and wash system.

How to find the right part for your Kenmore dishwasher

Use your model number (58765820) to shop the correct parts list, then match by part name and diagram location.

Common steps we recommend:

• Confirm the full model number from the dishwasher’s model tag
• Identify the symptom (leak, not draining, poor cleaning, door not closing)
• Look up the matching part by name and diagram
• Compare mounting style and quantity needed (some parts are sold individually)
• Replace one part at a time and test a cycle

Example part available for model 58765820

If your portable dishwasher is hard to roll or the wheel is damaged, a common fix is replacing a caster.

Symptom	Likely area	Example part for 58765820
Dishwasher is difficult to move	Wheels/rollers	Caster 5300808972

Why it matters

Kenmore dishwashers were produced across many years and designs. Even when two units look similar, small differences in wheel hardware, pump fittings, or door latch style can cause the wrong part to not fit or not seal correctly.

Helpful DIY tip before ordering

If you are unsure you have the correct model number, use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026

To tell what Kenmore dishwasher model you have, we look for the model/serial tag on the dishwasher itself. On most Kenmore dishwashers, it’s visible when you open the door, usually on the inner door frame, the top edge of the door, or along the tub opening.

Where to find the model number tag

Check these common locations in this order:

• Open the door and inspect the left and right inner door frame
• Look along the top edge of the door (near the latch area)
• Check the tub opening lip (the rim around the opening)
• Look on the tub wall just inside the door
• For portable units, check the back panel or lower rear area near the power cord and hoses

What the model number should look like

Kenmore model numbers are typically a series of numbers and may include a prefix on some units. For your page, the model we are supporting is Kenmore 58765820.

What you see on the tag	What it means	What to do next
58765820	Exact model match	Use this model to choose compatible parts
587.65820 or similar	Same model family formatting	Enter the full number exactly as shown
A different number	Different model	Use that exact number for parts lookup

Why it matters for parts and troubleshooting

We use the exact model number to match the correct parts diagrams, electrical components, racks, wheels, and hardware. Even small model changes can affect fit and wiring.

If the tag is missing or unreadable

Use these practical options:

• Clean the label area with a damp cloth to reveal faded print
• Take a photo with your phone and zoom in to read the characters
• Check for a second tag on the rear or underside (common on portable dishwashers)
• Match your unit by comparing key parts; for example, a worn wheel can be replaced with the compatible caster 5300808972

Last updated: February 2026

Kenmore model 58765820 is a portable dishwasher; the exact exterior dimensions depend on the cabinet, top, and wheel setup on your specific unit. Most portable dishwashers are about 24 inches wide, 34 to 36 inches high, and 24 to 27 inches deep; confirm by measuring your dishwasher.

How to measure your 58765820 accurately

Measure with the dishwasher in the position you will use it (and with the door closed).

• Width: left side to right side at the widest point
• Height: floor to the highest point (include the top and any trim)
• Depth: front of the door to the back panel (do not include loose hoses unless they must sit behind the unit)
• Door clearance: how far the door swings out when fully open
• Rolling clearance: space needed to roll to the sink, if you move it often

Typical size ranges (portable vs built-in)

Use these ranges to plan space; your tape-measure numbers are the final answer.

Dishwasher type	Typical width	Typical height	Typical depth
Portable dishwasher (like 58765820)	~24 in.	~34 to 36 in.	~24 to 27 in.
Built-in standard	24 in.	~33 1/2 to 35 in.	~24 in.
Built-in compact	18 in.	~33 1/2 to 35 in.	~24 in.

What can change the measured size

Portable units often vary slightly because of mobility and leveling components.

• Casters/wheels can change height and how the unit sits
• Leveling adjustments can raise or lower the cabinet slightly
• Countertop top/trim can add to overall width or height
• Rear panel connections (cord routing, hose routing) can affect usable depth

If the dishwasher sits low, wobbles, or is hard to roll, inspect the wheels; the caster 5300808972 is the replacement wheel used on this model.

Why it matters

Correct measurements prevent clearance issues at the counter edge, help the door open fully, and ensure you have enough room to roll the portable dishwasher to the sink and back.

Last updated: February 2026