Owner’s manual
View engine
Where is the model number on a Craftsman tiller?
On the Craftsman front-tine tiller model 917292481, the model number is printed on the product identification label. It’s commonly located on the tine shield/guard area or on or near the fuel tank; on some units it can also be on the front of the tiller. See the 917292481 owner's manual for the exact label location illustrations and parts diagrams.
Quick places to check first
- Tine shield or tine guard (near the rotating tines)
- Frame rail near the engine mount
- On or near the fuel tank
- Front of the tiller housing (facing forward)
- Handle column area near the control panel
How to read the label correctly
The label typically shows a model number and may also list an engine model/type. For this tiller, the owner’s manual identifies the engine as a Briggs & Stratton engine (model family information is shown in the manual’s engine section).
| What you see on the label | What it means | What to use for parts |
|---|---|---|
| Model number (example: 917.292481) | The Craftsman tiller model | Use 917292481 |
| Engine model/type numbers | The engine’s identification | Use for engine-specific parts |
Why it matters
Using the correct model number helps us match the right Craftsman diagrams and parts for your exact tiller configuration (handles, belt guard, tine assembly, and transmission). Even small model differences can change belts, shields, and hardware.
Last updated: February 2026
Who builds Craftsman tillers?
For Craftsman front-tine tiller model 917292481, the 917 model prefix is widely used for units built for Craftsman by Husqvarna/AYP (American Yard Products). This is why many Craftsman tillers share designs and parts layouts with other AYP-built machines; confirm your exact configuration in the 917292481 owner's manual.
How to identify the builder on your specific tiller
Use these quick checks on your Craftsman 917292481 to match the manufacturer family and parts system.
- Check the full model tag for 917.292481 (often on the frame)
- Match the control layout and tine engagement style to the diagrams in the manual
- Compare the parts list and exploded views to the parts you are replacing
- Use the engine model and type (on the engine label) to source engine-specific service items
- Verify cable routing and linkage style before ordering control parts
What “built by Husqvarna/AYP” means for parts and repairs
It mainly affects how parts are grouped and how assemblies are designed (belts, pulleys, shields, and control linkages).
| What you’re doing | What to use for best accuracy | Example from this model’s parts list |
|---|---|---|
| Confirming assembly and adjustments | Manual diagrams and procedures | 917292481 owner's manual |
| Replacing a control or engagement component | Match by part ID and name | Control lever 584447601 |
| Fixing drive engagement issues | Inspect belt and pulley system | Idler pulley 532161806 |
Why it matters
Knowing the builder family helps you avoid look-alike mismatches. Many Craftsman tillers resemble Cub Cadet or other brands, but the correct fit comes from the exact model number (917292481) and the corresponding parts breakdown and adjustment steps.
Last updated: February 2026
What kind of engine is on a CRAFTSMAN tiller?
The Craftsman front-tine tiller model 917292481 uses a Briggs & Stratton engine. In the parts breakdown for this model, the engine is identified as Briggs & Stratton model 126402, type 0206-E1, and the owner’s manual also notes it is a low-emissions engine.
How to confirm the exact engine ID on your tiller
We recommend matching the engine on your machine to the manual and the engine label so you order the right tune-up and fuel system parts.
- Check the engine’s model-type-code label (usually on the blower housing, valve cover area, or near the muffler).
- Match the tiller model number on the frame tag to 917292481.
- Use the engine model and type to select correct items like the spark plug, carburetor kit, and gaskets.
- Review the engine section diagrams in the 917292481 owner’s manual.
What this means for maintenance and parts
Because this is a Briggs & Stratton engine, most service items are selected by the engine’s model and type, not only by the tiller model.
| What you need | Where to look | Why it matters |
|---|---|---|
| Engine make | Briggs & Stratton | Determines service procedures and specs |
| Engine model/type | 126402 / 0206-E1 | Ensures correct carburetor and gasket kits |
| Tiller model | 917292481 | Ensures correct belts, shields, controls, and hardware |
Why it matters
Ordering engine parts by the wrong model or type can lead to mismatched carburetor components, incorrect gaskets, or the wrong ignition parts. Using the engine ID from the manual and the engine label keeps repairs accurate and reduces downtime.
Last updated: February 2026
