Kenmore 10641179711 side-by-side refrigerator Parts

The most common problems we see on Kenmore refrigerators like model 10641179711 are cooling issues, water leaks, ice maker or dispenser trouble, door-seal problems, and unusual noises. Many of these come down to airflow restrictions, temperature control settings, or a failing fan or defrost component; the troubleshooting charts in the 10641179711 owner's manual help you narrow it down fast.

Common symptoms and what usually causes them

• Not cooling or warm temperatures: blocked air vents, controls not set for conditions, dirty coils, or an evaporator fan problem
• Too cold in the fresh food section: controls set too cold; top shelf can run colder because freezer air enters near upper vents
• Water under the refrigerator or inside compartments: clogged defrost drain, door left ajar, or poor door sealing
• Ice maker not making ice: water supply issue, frozen fill path, or ice maker module failure (if equipped)
• Noises (buzzing, rattling, whirring): fan blade rubbing ice, fan motor wear, or normal longer run times on energy-efficient designs

Quick checks we recommend first (fast, no parts)

1. Confirm the unit has power and is plugged into a grounded outlet (no extension cord).
2. Make sure both doors fully close; reduce door openings and check for gaps in the gasket.
3. Clear packages away from air vents so cold air can circulate.
4. If temperatures are off, adjust controls one step and recheck after 24 hours.
5. If the refrigerator is rocking or doors look uneven, level and align the cabinet.

Parts that commonly solve these problems

If troubleshooting points to a failed component, these model-matched parts are common fixes:

Symptom	Likely area	Example part for 10641179711
Frost buildup, warm fridge	Defrost system	Refrigerator heater WP2323198
Warm fridge, weak airflow	Evaporator fan	Refrigerator evaporator fan motor WP2315549 and refrigerator evaporator fan blade WP2169142
Door not sealing, moisture	Door seal	Door gasket (black) 2159083 (refrigerator) or door gasket (black) 2159082 (freezer)

Why it matters

Cooling, moisture, and ice maker complaints often share the same root cause: poor airflow or warm, humid air entering through an unsealed door. Fixing vent blockages, settings, and door sealing prevents food spoilage, frost buildup, and excessive compressor run time.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10641179711, the complete model number and serial number are printed on the model and serial number label located on the refrigerator cabinet. Open the fresh food (refrigerator) door and look along the inside edges of the cabinet for the label.

Where to look (quick checklist)

• Open the fresh food door (right-side door on most side-by-side units)
• Check the inside cabinet wall near the door opening
• Look along the side wall around mid-height
• Check near the top hinge area inside the cabinet
• If you do not see it immediately, scan the front frame (the face of the cabinet behind the gasket)

What the label looks like

The label typically includes:

• Model number (for example, 106.4113* or 106.4117* family formats in the guide)
• Serial number
• Electrical ratings and other manufacturing information

We recommend writing the full model and serial number exactly as shown so you can match the correct Kenmore parts list and diagrams.

Why it matters

Kenmore model numbers can look very similar across 106-series refrigerators, but parts like a door gasket, evaporator fan motor, or ice maker kit can vary by revision. Using the exact model number helps ensure the replacement part fits and the repair steps match your unit.

Helpful reference

What you need	Where it’s found	When you’ll use it
Model number	Model/serial label inside the fresh food compartment	Ordering parts, checking diagrams
Serial number	Same label	Identifying production run and compatible revisions

For model-specific details and diagrams, use the owner's manual.

Last updated: February 2026

For Kenmore model 10641179711, the exact cubic-foot capacity is listed in the product specifications section of the owner's manual. If you need a quick confirmation, the model and serial label inside the refrigerator compartment is the most reliable place to match your exact version.

Fast ways to find the capacity for model 10641179711

• Check the model and serial number label inside the fresh food section (usually on a side wall or near the crisper area).
• Look in the specifications/features pages of the owner's manual.
• If you are comparing similar Kenmore 106 models, use the full model number (all digits) because small suffix differences can change features and capacity.
• If you are measuring for fit, use cabinet opening guidance in the manual (for example, many 36-inch class side-by-side units need a 36-inch minimum cutout width plus clearance).

What to do if you are trying to estimate capacity

If you are estimating for storage planning (not ordering parts), most full-size side-by-side refrigerators are commonly in the 20 to 26 cu. ft. range. Use the manual spec for the exact number because door thickness, ice maker configuration, and internal bin layout affect usable space.

Quick estimate vs. exact spec

Method	What you get	Best for
Model label inside the fridge	Exact identification of your unit	Confirming you have the right specs/parts
Owner's manual	Exact published capacity and dimensions	Planning space, comparing models
Rough range (20 to 26 cu. ft.)	Approximate capacity	General expectations only

Why it matters

Cubic-foot capacity helps you compare refrigerators, but it does not tell the whole story. Shelf layout, door bins (such as a refrigerator door bin W11174793), and ice maker components can change how much usable space you actually have day to day.

Last updated: February 2026

For Kenmore model numbers, we read the full model tag exactly as printed on the refrigerator; the prefix identifies the manufacturing source and the remaining digits narrow down the design and parts. For Kenmore side-by-side refrigerators like model 10641179711, the 106 prefix is the key identifier to use when matching parts and manuals.

Where to find the model number on your refrigerator

We use the model and serial number label on the product (commonly inside the fresh food compartment on a side wall, near the crisper area, or around the door opening). The owner's manual also notes that the model and serial number label is located on the product.

• Look inside the refrigerator compartment first (not the freezer)
• Check the side walls near the crisper drawers
• Check the ceiling area near the light housing
• Check the door frame area when the door is open
• Write down the full model number and serial number exactly (including any dots or suffixes)

How the Kenmore model number is structured (what each part means)

Kenmore model numbers are built to help identify who made the unit and which parts fit.

What you see on the tag	What it tells us	Why it matters
Prefix (first 3 digits)	Manufacturing source code	Helps match the correct parts system
Middle digits	Base design series	Narrows down compatible assemblies
Ending digits/suffix	Version, color, or revision	Prevents ordering the wrong variation

Example for this model family

The manual for this refrigerator family lists models in the 106.4113* and 106.4117* range; the asterisk typically indicates a color or finish code. That is why using the complete model number from the tag (such as 10641179711) is important when selecting parts.

Why it matters for parts and troubleshooting

Using the exact Kenmore model number helps us match the correct door gasket, evaporator fan motor, ice maker kit, and other refrigerator parts. Even small differences in a suffix can change fitment for shelves, bins, and door assemblies.

Quick tips to avoid mistakes

• Match every digit of the model number before ordering
• Use the model number (not the serial number) to look up parts
• If your tag shows a dot (example: 106.4117*), include it when searching
• Confirm door color/finish before ordering door gaskets or door assemblies

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For your Kenmore 10641179711 side-by-side refrigerator, lifespan depends most on basic care (airflow, clean coils, good door seals) and fixing cooling or defrost problems early using the owner's manual.

Typical lifespan ranges (what to expect)

• Average: 10 to 15 years
• Often achievable with good maintenance: 15+ years
• Shortened lifespan is common when: condenser coils stay dirty, doors do not seal, or the unit runs hot due to poor airflow

What you do	What it helps prevent	Why it extends life
Clean condenser coils	Overheating, long run times	Reduces compressor strain
Keep doors sealing tightly	Frost, moisture, warm air leaks	Stabilizes temps and run time
Maintain proper airflow around cabinet	High operating temps	Protects sealed system components
Address cooling/defrost issues early	Ice buildup, warm fridge	Prevents fan and compressor overwork

Maintenance that makes the biggest difference

• Vacuum and brush condenser coils regularly (more often with pets).
• Keep the base grille area clear so the refrigerator can breathe.
• Confirm doors close fully and are not blocked by bins or food packages.
• Level the refrigerator so doors self-close and seal evenly (the manual notes leveling and door alignment steps).
• Keep temperatures steady (avoid frequent warm-ups from long door openings).

When repairs are worth it (and when they are not)

A Kenmore side-by-side is usually worth maintaining when the issue is a common wear part, but major sealed-system repairs can be a bigger decision.

Symptom	Common repair area	Example part on this model page
Warm fridge or freezer, fan noise changes	Evaporator fan system	Refrigerator evaporator fan motor WP2315549
Heavy frost on back wall, warming temps	Defrost system	Refrigerator heater WP2323198
Poor cooling, runs constantly	Sealed system (advanced)	Compressor W10233960

Why it matters

A refrigerator that runs longer and hotter than normal wears out the compressor and cooling system faster. Simple upkeep (coils, seals, leveling) keeps run time and temperatures stable, which is the most reliable way to reach the 10 to 15 year average and push beyond it.

Last updated: February 2026