LG LSG4513BD/00 gas range Parts

Most LG gas ranges, including model LSG4513BD, typically last 13 years.

What affects how long a range lasts

A range’s “life” is usually limited by heat stress, electronics wear, and how often it’s used. These factors have the biggest impact:

• Heavy daily cooking and frequent self-clean cycles
• Poor airflow around the oven (heat buildup behind the control area)
• Spills and boilovers that clog burner ports or soak switches
• Power surges that stress the control boards
• Delayed repairs when ignition or temperature problems start

Common repairs as the range ages

On an LG gas range, the most common age-related issues are ignition and temperature control. If the oven stops heating reliably or takes longer to ignite, these parts are often involved:

• Range oven burner igniter MEE61841401
• LG range oven temperature sensor EBG61305805
• Range oven gas valve MJX62571702

Quick “is it worth fixing?” guide

Use this simple rule of thumb for LSG4513BD: if the repair restores safe ignition and stable baking temperatures, it is usually worth doing.

Range age	Typical recommendation	Why
0 to 5 years	Repair	High remaining service life
6 to 10 years	Repair if cost is reasonable	Many parts still economical
11 to 15 years	Repair only for key functions	More wear on electronics and gas components
16+ years	Replace	Multiple failures become more likely

Why it matters

Knowing the typical lifespan helps you plan: you can decide whether to invest in a repair (like an igniter or sensor) or start budgeting for a replacement before a no-heat or no-ignition failure disrupts cooking.

For model-specific care and operating guidance (including cleaning and usage practices that reduce wear), follow the LSG4513BD owner’s manual.

Last updated: February 2026

Your LG range model number is printed on the appliance’s rating label; once you find it, match it exactly (letters and numbers) to identify the correct parts and LSG4513BD manual. For this parts page, the model is LSG4513BD.

Where to find the model number on an LG gas range

Most LG ranges place the rating label in one of these common spots:

• On the oven frame behind the storage drawer (pull the drawer out)
• On the oven door frame (open the door and check the front edge)
• On the lower front frame near the warming drawer area (if equipped)
• On the back panel of the range (less common for everyday access)

What to write down (so parts match)

Copy the model number exactly as shown on the label, then record the serial number too.

• Model number (example format: LSG4513BD)
• Serial number (helps date the unit and confirm production run)
• Gas type noted on the label (natural gas vs LP conversion status)
• Any suffixes after the model (if shown on your label)

Quick check: model number vs serial number

Item	What it does	Used for parts lookup?
Model number	Identifies the exact range design	Yes
Serial number	Identifies your specific unit	Sometimes

Why it matters

LG ranges can look identical but use different igniters, sensors, knobs, or control parts across model variations. Using the exact model number helps us match the right components, such as an oven burner igniter MEE61841401 or an oven temperature sensor EBG61305805, when troubleshooting heating or temperature issues.

Last updated: February 2026

A gas smell from your LG LSG4513BD gas range usually means unburned gas is escaping somewhere in the fuel path or a burner is not igniting cleanly. Stop using the range, ventilate the room, and follow the safety and shutoff steps in the LSG4513BD owner's manual before troubleshooting.

First, make it safe

• Turn all burner knobs to OFF.
• Open windows and run the range hood (if available).
• Shut off the gas supply valve to the range.
• Do not use matches, lighters, or any spark-producing switches near the odor.
• If the smell is strong or persistent, have the gas supply and range checked by a qualified technician.

Common causes (and what to check)

In most LG gas ranges, a gas odor comes from one of these issues:

• Surface burner not lighting right away: gas flows for a few seconds before ignition.
• Dirty or misaligned burner cap/head: flame lifts, sputters, or goes yellow.
• Weak oven ignition: the igniter glows but the burner lights late, causing a brief gas smell.
• Loose fitting or damaged valve/regulator area: odor is noticeable even when not cooking.
• Recent cleaning or installation: moisture or disturbed parts can affect ignition.

Quick symptom guide

When you smell gas	Most likely area	What it points to
Only for a few seconds when lighting a top burner	Surface burner	Burner cap/head alignment or clogged ports
Mostly during bake, with delayed ignition	Oven burner/ignition	Igniter getting weak or burner lighting late
Even when all burners are off	Gas supply path	Valve/regulator/fitting leak (service needed)

Parts that commonly fix delayed oven ignition

If the odor happens mainly during baking and the oven lights slowly, the oven ignition system is the first place we look.

• LG range oven burner igniter MEE61841401
• Range oven burner igniter MEE63084901
• Range oven gas valve MJX62571702

Why it matters

Gas odor is a safety issue and also a performance issue; delayed ignition can overheat components and cause uneven baking. Addressing ignition and burner alignment early helps your LG LSG4513BD run cleaner and more reliably.

Last updated: February 2026