Kenmore 79072402014 gas range Parts

Yes. Kenmore sells gas ranges, including the Kenmore 79072402014 gas range; they are designed to run on natural gas from the factory, with LP conversion handled using the correct conversion kit and a qualified installer when needed (per the installation instructions in the 79072402014 installation guide).

Kenmore-branded ranges are supported with model-specific replacement parts and documentation. For model 79072402014, common service items include ignition and temperature-sensing components.

• Use the full model number 79072402014 when ordering parts.
• Match parts by function (bake ignition, broil ignition, surface ignition, temperature sensing).
• Follow gas safety steps any time you smell gas.
• Keep combustion air paths clear around the oven vent and base.
• Use a qualified installer or service agency for gas conversion and gas supply work.

Your range is factory preset for natural gas. If you need LP, the correct conversion kit and proper setup are required.

If your oven will not heat or takes too long to ignite, these model-matched parts are common starting points:

• Tappan range oven burner igniter 316489403 (bake ignition)
• Range oven igniter 5304506545 (ignition component used on some configurations)
• Frigidaire range oven temperature sensor 316490000 (temperature regulation)

Gas ranges depend on correct fuel setup, proper airflow for combustion, and reliable ignition. Using the right Kenmore 79072402014 parts and following the installation guidance helps prevent ignition problems, poor baking performance, and unsafe operating conditions.

Last updated: February 2026

A Kenmore gas range like model 79072402014 typically lasts 15 years with normal household use and basic maintenance. Keeping burners clean, ensuring proper ignition, and avoiding overheating helps the oven and surface burner system run efficiently for the long haul (see the 79072402014 installation guide).

Most ranges reach their full life when the gas system, ignition, and temperature control stay in good shape.

• Cooking frequency: daily high-heat use shortens life faster than light use
• Cleaning habits: spills and grease can clog burner ports and affect ignition
• Ignition health: weak igniters can delay lighting and strain components
• Temperature accuracy: a drifting sensor can cause overheating and extra cycling
• Ventilation: good airflow reduces heat and grease buildup around controls

Use these habits to help your 79072402014 reach its expected service life:

• Clean surface burner caps and heads regularly; keep ports clear
• Confirm each surface burner lights quickly and evenly
• Watch for delayed oven ignition (normal glow-to-flame is about 30 to 60 seconds)
• Keep the oven bottom area free of heavy debris that can affect flame pattern
• If flames look abnormal, follow the setup and checks in the 79072402014 installation guide

Many ranges feel “worn out” when a few service parts need replacement.

A gas range can run safely and cook evenly for years, but ignition delays, poor flame quality, and inaccurate temperatures increase wear on the gas valve, igniters, and controls. Catching those symptoms early usually costs less than waiting for a no-heat failure.

Last updated: February 2026

On Kenmore gas range model 79072402014, the model and serial number plate is located on the right-hand surface of the oven front frame. Open the storage drawer, warmer drawer, or broiler drawer (depending on your configuration) to see the identification plate; confirm the location in the 79072402014 installation guide.

• Turn the oven off and let it cool.
• Pull out and open the bottom drawer (storage, warmer, or broiler drawer).
• Look at the right-hand side of the oven front frame for the identification plate.
• Write down the model number, serial number, and any lot number/letter shown.
• Use that exact model number when ordering Kenmore range parts like an igniter, gas valve, or temperature sensor.

The ID plate is not typically on the back panel for this style of range. It is easy to miss because it sits on the front frame and is only visible when the lower drawer is opened.

Using the exact model number ensures you get parts that fit and function correctly for your burner system and oven controls. It also helps match the correct fuel setup information (such as natural gas vs. LP conversion details) when servicing the range.

Last updated: February 2026