Maytag MFI2568AEB refrigerator Parts

Maytag refrigerators typically last 10 to 15 years. With consistent care (cleaning, correct temperatures, and timely part replacement), many units reach the high end of that range; heavy use, poor airflow, and neglected seals or filters shorten life. For model MFI2568AEB, follow the maintenance guidance in the owner's manual.

Typical lifespan ranges (what to expect)

Most full-size Maytag refrigerators fall into these real-world ranges:

• Average: 10 to 15 years
• Often achievable with good maintenance: 15 years
• Common early-life reducers: dirty condenser area, warm room temps, door seal leaks, clogged water filter, frequent door openings

Lifespan range	What it usually indicates	What to do next
0 to 7 years	Installation, airflow, or component issue	Check temps, door seal, fan operation; replace failed parts as needed
8 to 15 years	Normal service life	Keep up with cleaning and filter changes
16+ years	Above-average longevity	Watch for cooling noise changes and seal wear

Maintenance that extends refrigerator life

These actions reduce compressor run time and help prevent temperature swings:

• Keep door gaskets clean and sealing tightly; warm air leaks force longer run times
• Maintain steady set temperatures; avoid frequent large adjustments
• Replace the water filter on schedule to protect water flow and ice maker performance (see refrigerator water filter EDR4RXD1)
• Avoid overpacking; leave space for airflow around vents
• Keep the unit level so doors close fully and consistently

Signs your refrigerator is nearing end-of-life

If your MFI2568AEB shows several of these at once, repairs become more likely:

• Longer cooling cycles or warm fresh-food temps
• Louder or more frequent clicking/humming from the compressor area
• Frost buildup or inconsistent freezer temperatures
• Water leaks or recurring ice maker/dispenser issues
• Door seal gaps, sweating, or condensation around the doors

Why it matters

A refrigerator that is working harder than it should uses more electricity and puts extra wear on key components like the compressor, fan motor, and start device. Simple upkeep (especially sealing and airflow) is the most reliable way to reach the 10 to 15 year lifespan.

You can order replacement parts for your Maytag MFI2568AEB from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes, a bottom-mount refrigerator like the Maytag MFI2568AEB is often “better” for everyday use because fresh-food items sit at eye and waist level, so you bend less and access the most-used shelves more easily. The tradeoff is that the freezer is lower and typically uses pull-out drawers.

What “better” usually means in real kitchens

Bottom-mount designs tend to win on convenience and organization for fresh foods.

• Fresh-food section is easier to reach (less bending for milk, produce, leftovers)
• Wide shelves make it simpler to see and organize items
• Freezer drawers help separate frozen foods into layers/bins
• Better day-to-day ergonomics for frequent cooking and meal prep
• Good fit for households that open the refrigerator more than the freezer

Tradeoffs to consider

A bottom-mount is not automatically the best choice for every home.

• You bend more to access frozen foods in the lower drawer
• Large frozen items can be harder to stack in drawer-style freezers
• Door swing and clearance matter; measure your opening and allow airflow space
• Proper leveling is important for door alignment and sealing

For model-specific installation clearances and leveling steps, follow the installation guide.

Quick comparison: bottom-mount vs top-freezer

Feature	Bottom-mount (like MFI2568AEB)	Top-freezer
Fresh-food access	Best	Good
Freezer access	Good (drawer)	Best (eye level)
Organization	Strong for fresh foods	Simple, basic
Ergonomics	Less bending overall	More bending for fridge items

Why it matters

Choosing the right layout affects comfort, food visibility, and energy use. For example, keeping doors open less and maintaining good airflow helps efficiency; our owner's manual includes practical energy-saving tips.

If you need replacement parts for your Maytag MFI2568AEB (like a refrigerator water filter EDR4RXD1 or refrigerator door gasket WPW10436253), you can order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

Ice on the bottom of the freezer in your Maytag MFI2568AEB happens when defrost water cannot drain to the evaporator pan. The meltwater overflows, refreezes on the freezer floor, and gradually forms a thick ice sheet. Use the steps in the owner's manual to access and clear the drain path safely.

Most common cause

A clogged or frozen defrost drain is the usual reason. During normal defrost cycles, water should flow through a drain hole and down a drain tube; when that path blocks, water stays in the freezer and freezes.

What typically blocks the drain

• Ice buildup at the drain opening
• Food particles or debris in the drain trough
• Sludge in the drain tube
• A drain tube that is pinched or not seated correctly after cleaning

How we fix it (safe, practical steps)

1. Move food to a cooler and unplug the refrigerator.
2. Remove the freezer drawer/bins to expose the freezer floor.
3. Melt the ice sheet with a hair dryer on low or by placing bowls of hot water in the freezer (keep heat moving to avoid warping plastic).
4. Locate the drain opening under/near the evaporator cover area and flush it with hot water using a turkey baster.
5. Confirm water flows freely to the drain pan underneath; repeat flushing until it drains fast.

Quick checks to prevent repeat icing

• Keep packages away from rear vents so airflow stays strong.
• Make sure the freezer temperature is set correctly (most units run best around 0°F to 2°F).
• Clean spills quickly so they do not wash debris into the drain.

When it is more than a clogged drain

If the ice returns quickly (within days), check for:

Symptom	What it points to	What to do next
Heavy frost on back wall	Air leak or airflow issue	Inspect door seal and door closing
Warm freezer, little airflow	Evaporator fan issue	Follow how to fix your evaporator cooling fan
Water/ice around door edges	Gasket not sealing	Inspect and clean gasket surfaces

Why it matters

A blocked drain can lead to recurring ice buildup, reduced airflow, warmer temperatures, and longer run times. Clearing the drain restores normal defrost drainage and helps protect food quality.

If you need replacement parts for dispenser, ice, or cooling issues, order from the parts list for your MFI2568AEB or search by model on Sears PartsDirect.

Last updated: February 2026

On a Maytag MFI2568AEB bottom-mount refrigerator, the “bottom part” people usually mean is the machine compartment area, where the compressor and condenser components live (typically at the back, near the floor). This is the section that drives cooling and needs airflow clearance.

What you will find in the bottom (machine compartment) area

Most refrigerators like the Maytag MFI2568AEB have these key components down low:

• Compressor: pumps refrigerant through the sealed system
• Condenser fan and blade: moves air across the condenser to remove heat
• Start device: helps the compressor start and run properly
• Condenser coils: release heat (often behind a rear cover or underneath)

If you are troubleshooting a “no cool” or loud running issue, these parts are common suspects.

Parts on this model that relate to the bottom cooling system

If you are diagnosing cooling or start-up problems, these model-matched parts are commonly involved:

• Refrigerator compressor W10160407
• Refrigerator start device W10613606
• Blade, cond W10156818

Quick guide: which part matches which symptom

Symptom	Most likely area	Common related part
Clicking, then no cooling	Compressor start circuit	Start device
Warm fridge and freezer, compressor runs a lot	Heat not being rejected	Condenser fan/blade, dirty coils
Loud humming or hard starting	Compressor system	Compressor, start device

Why it matters

The machine compartment needs proper airflow to keep the compressor from overheating and to maintain efficient cooling. During installation, we recommend leaving clearance for air circulation behind the machine compartment cover, as described in the installation guide.

Helpful maintenance tip

Keeping the condenser area clean helps performance and can reduce run time:

• Vacuum dust from the lower rear area periodically
• Keep the back clearance open for airflow
• Avoid placing the refrigerator near strong heat sources

You can order replacement parts for Maytag MFI2568AEB from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026