Kenmore 79096012401 electric range Parts

To reset your Kenmore electric range model 79096012401, turn the range off, then restore power by switching the range circuit breaker off for about 1 minute and turning it back on. After power returns, reset the clock and any oven settings using the 79096012401 owner's manual.

Quick reset steps (most common)

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off on the control.
• Switch the range breaker OFF (or unplug the range if accessible).
• Wait about 60 seconds.
• Restore power, then set the clock and reselect your bake/broil settings.

What a “reset” fixes (and what it does not)

A power reset clears many temporary control glitches, but it will not repair a failed heating circuit or damaged wiring.

Symptom	Reset may help	Likely needs troubleshooting/parts
Display frozen or beeping	Yes	Sometimes
Oven will not start after a brief outage	Yes	Sometimes
Oven not heating at all	Sometimes	Often
One surface element not heating	No	Yes

If the oven still will not heat after resetting

If the display comes back but the oven will not heat, the most common causes are a failed heating element or a control issue.

• Inspect for visible damage (blisters, breaks) on the bake element.
• Try Broil briefly; if broil works but bake does not, the bake element is a strong suspect.
• If neither bake nor broil heats, check for a tripped breaker (some homes use a 2-pole breaker) and then move to control or wiring checks.

Model-matched parts that are commonly involved:

• Frigidaire range bake element 316075103
• Frigidaire range broil element 316203200

Why it matters

The manual warns not to operate the range during a power failure; when power resumes, the range can begin operating again and you will need to reset the clock and oven function. A proper reset helps restore safe, predictable operation.

Last updated: January 2026

On the Kenmore 79096012401 electric range, the PF code means the oven control detected a power failure or power interruption. Clearing the code is usually as simple as resetting the clock; if PF keeps returning, focus on the home power supply and the range’s wiring connections per the 79096012401 owner's manual.

What to do first (quick reset)

• Press Clear/Off (or the cancel key) to stop beeping.
• Reset the time of day on the control.
• Try baking for 10 to 15 minutes to see if the code returns.
• If PF returns immediately, avoid using the oven until power is stable.

Common causes of PF on an electric range

• Brief outage or flicker from the utility
• Loose power cord connection at the terminal block (rear access area)
• Tripped breaker or weak breaker that is dropping one leg of 240V
• Loose neutral or house wiring issue at the outlet/junction box
• Intermittent connection in the range wiring harness or control area

Power checks that matter (what you are confirming)

For most U.S. electric ranges, the oven needs a solid 240V supply (two hot legs) and a stable connection.

What you check	Typical target	What PF suggests if it’s off
Breaker condition	Not tripped, tight	Breaker is weak or tripping intermittently
Supply voltage	About 240V hot-to-hot	One leg is dropping out, causing control reset
Connection tightness	No looseness/heat marks	Loose terminal/outlet connection causing flicker

When PF points to a repair inside the range

If your house power is stable and PF still appears, the issue is usually an intermittent electrical connection at the range or a failing electronic control. Use the safety and access guidance in the 79096012401 installation guide before removing panels or checking wiring.

Related parts that can be involved

These parts are not the only possibilities, but they are commonly touched during diagnosis:

• Range wire harness 316416422 (loose or heat-damaged connector)
• Range control panel 316402706 (control area where connections and keypad live)

Why it matters

A repeating PF code is more than an annoyance; it often means the control is losing power momentarily. That can cause temperature swings, incomplete cooking, and in some cases overheating at a loose connection.

Last updated: January 2026

Most Kenmore ranges are 30 inches wide, and the Kenmore electric range model 79096012401 is designed for a 30-inch opening; the installation dimensions show an overall width of 29 7/8 inches (with a cooktop width called out as 30-1/8 inches). See the exact fit and clearance diagram in the 79096012401 installation guide.

What to measure (so you buy the right size)

Use a tape measure and confirm these before ordering parts or planning a replacement:

• Range body width (side-to-side across the front)
• Cutout/opening width between cabinets
• Depth from the back wall to the front of the door handle
• Height to the cooktop surface and to the backguard (if present)
• Clearances to combustible surfaces and cabinets

Quick size reference for model 79096012401

These are the key width-related numbers shown in the installation dimensions.

Measurement (from install dimensions)	What it means	Value
Overall range width	Main cabinet width that fits between counters	29 7/8 in
Cooktop width callout	Top surface span shown in the diagram	30-1/8 in
Typical advertised class	How ranges are commonly described	30 in

Why the numbers can look different

A range can be marketed as “30-inch” even when the cabinet is slightly under 30 inches. That small difference helps the range slide into a standard 30-inch opening without rubbing the countertops.

Why it matters

Getting the width right prevents installation problems like cabinet interference, uneven gaps, and heat clearance issues. It also helps when matching cosmetic parts (like a control overlay) to the correct model.

Last updated: January 2026