Can you still get parts for Kenmore refrigerators?
Yes. We still carry replacement parts for Kenmore refrigerators, including your Kenmore model 10670209991 top-mount refrigerator. You can match parts by model number and symptom, then order common replacements like ice maker, door gaskets, and water system parts from our parts list or through Sears PartsDirect.
These are some of the most frequently needed parts for cooling, leaking, and ice maker issues:
- Ice maker: ice maker assembly - refrigerator ice maker by whirlpool 4317943
- Water supply control: refrigerator inlet valve WP2315576
- Door sealing: refrigerator door gasket 2159061 and refrigerator freezer door gasket 2159060
- Defrost protection: refrigerator defrost bi-metal WP4387503
- Interior light control: refrigerator light switch W11384469
Use these quick checks so the replacement fits and fixes the problem the first time.
- Confirm the full model number on the rating label: 10670209991
- Compare the part ID on the listing to the part shown in the diagram
- Match the symptom to the system (ice maker, sealed system, defrost, door seal)
- Check finish and location (fresh food door vs freezer door gaskets)
- Review any model-specific notes in the owner's manual
| Symptom | What to check first | Example part on this model |
|---|---|---|
| No ice or small cubes | Water supply to ice maker | Refrigerator inlet valve WP2315576 |
| Frost buildup, warm fridge | Defrost system components | Refrigerator defrost bi-metal WP4387503 |
| Door not sealing, moisture | Gasket condition and door alignment | Refrigerator door gasket 2159061 |
| Light stays off or on | Door switch operation | Refrigerator light switch W11384469 |
Using the correct Kenmore 10670209991 parts helps restore proper temperatures, prevents air leaks that cause frost and high run time, and keeps the ice maker and water system working reliably. The owner's manual also includes care and handling guidance (for example, gasket cleaning and alignment tips) that can prevent repeat problems.
Last updated: February 2026
How do I tell what model Kenmore fridge I have?
You can identify your Kenmore refrigerator model by finding the model and serial number label inside the fresh food (refrigerator) compartment; on model 10670209991, the label is located on an inside wall of the refrigerator compartment. Use that full model number when looking up parts and the correct manual.
Check these common label locations on Kenmore top-mount refrigerators:
- Inside the refrigerator compartment on an interior side wall (most common)
- Along the ceiling area inside the refrigerator compartment
- On the frame just inside the door opening (hinge side)
- Behind the lower crisper drawer area (on some designs)
- Near the front base area behind the kick plate (less common)
Record these details exactly as shown on the label:
- Model number (example format: 106.XXXXXXXX)
- Serial number
- Purchase date (if available)
The model number determines the correct parts list and diagrams for your exact refrigerator. For example, door gaskets, an ice maker assembly, or a light switch can vary by model even when the refrigerator looks similar.
Use this table to confirm you have the right information before ordering parts.
| Item to find | What it looks like | What you use it for |
|---|---|---|
| Model number | Usually starts with 106 on Kenmore units like 10670209991 | Matching parts and diagrams |
| Serial number | Mix of letters and numbers | Dating the unit, service records |
| Product type | “Top-mount” (freezer on top) | Narrowing troubleshooting steps |
- Match the model number exactly (all digits)
- Use the parts list for model 10670209991 to choose replacements
- Use the 10670209991 owner's manual for model-specific label location notes, safety info, and operating guidance
- If you are ordering parts, you can also search by model number on Sears PartsDirect
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common issues we see on Kenmore refrigerators like model 10670209991 are cooling problems (often airflow or defrost related), water or ice maker troubles, and normal operating noises that can sound alarming. Use the troubleshooting and care steps in the owner's manual to narrow the cause before replacing parts.
- Not cooling or warm temperatures: blocked air vents, dirty condenser area, evaporator fan or defrost system trouble
- Frost or ice buildup: defrost problem (heater, defrost thermostat, timer/control) restricting airflow
- Water leaking or puddles: clogged/iced defrost drain, door not sealing, water line issues
- Ice maker not making ice: low water flow, a full or misinstalled filter, inlet valve issues, or ice maker wear
- Strange noises: clicking, buzzing, sizzling, gurgling, popping, or fan noise can be normal depending on when it happens
- Confirm air vents are not blocked by food packages; restricted airflow warms both sections.
- Keep door openings brief; frequent openings warm the cabinet and slow recovery.
- If ice production is low, allow 24 hours after heavy use or after dumping a large amount of ice.
- If water flow at the dispenser drops, remove the filter and test flow; if flow improves, replace the filter.
- Listen for timing: a buzz during ice maker fill, clicks during cycling/defrost, and sizzling during defrost can be normal.
| Problem area | What fails most often | Example part on this page |
|---|---|---|
| Ice maker not working | Ice maker module or assembly | Ice maker assembly - refrigerator ice maker by whirlpool 4317943 |
| Water not filling ice maker | Water inlet valve not opening fully | Refrigerator inlet valve WP2315576 |
| Door not sealing, moisture, leaks | Worn or warped gasket | Refrigerator door gasket 2159061 |
| Frost buildup, warm fridge | Defrost thermostat (bi-metal) | Refrigerator defrost bi-metal WP4387503 |
Most “big” refrigerator complaints trace back to airflow (vents blocked, fan issues) or water supply (filter restriction, inlet valve problems). Fixing the root cause protects food temperatures, improves ice production, and prevents repeat icing or leaking.
For model-specific diagrams and troubleshooting steps, use the parts list for 10670209991 on this page; for broader model lookups and ordering, visit Sears PartsDirect.
Last updated: February 2026
What is the cubic foot of my Kenmore refrigerator model 10670209991?
Your Kenmore top-mount refrigerator model 10670209991 has a total capacity of about 21.9 cubic feet. For the exact configuration details (shelf and bin layout that can affect usable space), we recommend checking the owner's manual.
Total cubic feet is the combined storage volume of the fresh food compartment and the freezer.
- It is a total capacity number, not just the refrigerator section
- Usable space varies with shelf positions, ice maker, and door bins
- A full ice maker bucket can reduce freezer storage
- Overpacking can restrict airflow and reduce cooling performance
| Capacity range | Typical fit | Notes |
|---|---|---|
| 18 to 20 cu. ft. | Small family | Less freezer and shelf flexibility |
| 21 to 22 cu. ft. | Most households | Balanced fridge and freezer space |
| 23+ cu. ft. | Larger households | Often wider or deeper cabinets |
Knowing your refrigerator’s cubic feet helps when planning grocery storage, choosing organization accessories, and comparing replacement models. It also helps set realistic expectations for freezer space if your unit is equipped with an ice maker.
Last updated: February 2026





