Kenmore 79092702010 electric range Parts

For a Kenmore range, the most reliable way to identify your exact model is to read the model and serial number from the identification plate. On Kenmore model 79092702010, that plate is located on the lower right oven frame behind the warmer or storage drawer; match that number exactly when ordering parts or using the 79092702010 owner's manual.

Where to look on Kenmore model 79092702010

Pull the warmer drawer or storage drawer straight out and look at the lower right oven frame for the identification plate.

• Turn the oven off and let it cool completely
• Open and remove the warmer/storage drawer for a clear view
• Find the identification plate on the lower right oven frame
• Write down the model number and serial number exactly as shown
• Use the full model number when searching for parts, diagrams, and troubleshooting

Quick checklist: model number vs. serial number

The model number tells us the design family and which parts fit; the serial number helps identify production details.

Item	What it’s used for	Example format
Model number	Correct parts lookup, manuals, wiring diagrams	79092702010
Serial number	Manufacturing details, service history	Letters and numbers

Why it matters

Kenmore ranges often look similar across multiple model series, but surface elements, control boards, door parts, and sensors can differ. Using the exact model number prevents ordering the wrong component, such as an frigidaire range oven temperature sensor 316490000 that fits one version but not another.

Tip for faster parts matching

Once you have the model number, compare the part name and ID when shopping.

• Oven not heating evenly: check the oven temperature sensor and bake element
• Broil not working: check the broil element and its supports
• Hot surface light issues: check indicator light and surface element switch

Last updated: February 2026

If your Kenmore electric range model 79092702010 isn’t getting hot, the most common causes are a failed bake element, a bad oven temperature sensor, or a control setting issue (such as the clock not being set). Start with basic settings, then test the heating and sensing parts.

Quick checks first (no tools)

• Confirm the oven is set to Bake and you pressed START.
• Set the time of day; this model can require the clock to be set before the oven will operate.
• Allow a full preheat before loading food (poor baking results can look like “not heating”).
• Make sure the oven vent area is not blocked; the vent is below the backguard.
• If you recently had a power outage, reset the range by turning the breaker off for 1 minute, then back on.

Parts that most often cause “no heat”

1) Bake element

A broken or burned-through bake element can prevent the oven from heating at all.

• Look for blisters, cracks, or a separated spot on the element.
• With power off, check continuity with a multimeter; no continuity means replacement.
• For this model, the correct part is the frigidaire range bake element 316505500.

2) Oven temperature sensor

If the sensor reads wrong, the control may not energize the element correctly.

• Inspect the sensor wiring connection at the back of the oven.
• Test sensor resistance at room temperature (typical sensors read around 1,000 to 1,100 ohms at 70°F; exact values vary by design).
• For this model, use the frigidaire range oven temperature sensor 316490000.

What the symptoms usually mean

Symptom	Most likely cause	What we check next
Oven never warms, broil may still work	Bake element	Continuity and visible damage
Oven heats but won’t reach set temp	Temperature sensor or calibration	Sensor resistance; then calibration in controls
Oven won’t start at all	Control settings or power issue	Clock set, correct mode, breaker, terminal block wiring

Why it matters

An oven that won’t heat is usually a straightforward electrical heating or sensing problem. Fixing the correct part first prevents repeat failures and helps the oven preheat and bake evenly.

For control settings, calibration, and safety notes for hot surfaces and vent location, follow the 79092702010 owner’s manual.

Last updated: February 2026

A Kenmore electric range like model 79092702010 typically lasts 13 to 15 years with normal use and basic maintenance. Keeping the oven vent clear, using the self-clean cycle correctly, and replacing wear items (like elements or sensors) on time helps you reach that lifespan.

What affects lifespan most

• Heat stress from frequent high-temp baking and broiling
• Power quality and tight, undamaged wiring connections
• Door seal condition (heat leaks make components work harder)
• Keeping the oven vent unobstructed for proper airflow
• Promptly fixing temperature accuracy problems

Quick maintenance checklist (high impact)

Use the care and safety guidance in the 79092702010 owner's manual.

• Do not block the oven vent under the left side of the control panel
• Avoid damaging or moving the door gasket when cleaning
• Replace failed heating parts quickly to prevent control damage
• Keep the control area dry and avoid harsh cleaners on the panel
• If baking temps seem off, test and address it before it worsens

Common parts that can extend service life

If performance issues show up, these model-compatible parts are often involved:

Symptom	Likely area	Example part on this model
Oven temperature swings, underbakes	Temperature sensing	Range oven temperature sensor 316490000
No bake heat	Bake circuit	Range bake element 316505500
Weak or no broil	Broil circuit	Range broil element 316203301

Why it matters

Most “range failures” are really a single worn component (element, sensor, switch, or control) that reduces heating performance or stresses other parts. Catching those symptoms early keeps your Kenmore 79092702010 cooking evenly and helps avoid bigger repairs.

Last updated: March 2026