Bosch SHE3AR56UC/07 dishwasher Parts

For Bosch dishwashers like model SHE3AR56UC, the most common problems are maintenance-related: restricted water flow from a dirty filter or spray arms, and draining issues caused by a clog or a failing drain component. These typically show up as poor cleaning, standing water, or a cycle that stops early.

Most common symptoms and what they usually mean

• Dishes come out dirty: filter or spray arms clogged; low water temperature; loading issue
• Standing water in the tub: drain path clogged or drain pump problem
• Not filling or fills slowly: water supply issue or water inlet valve problem
• Leaks at the door: door seal worn, dirty, or not sealing evenly
• Detergent not dispensing well: dispenser door sticking or blocked by a large item

Quick checks we recommend first (no parts needed)

1. Clean the filter area and remove any debris (glass, labels, food).
2. Spin and rinse spray arms; clear blocked holes.
3. Confirm the sink drain and garbage disposer inlet are clear (new disposers often have a knockout plug).
4. Run hot water at the sink until it is hot before starting a cycle.
5. Check the door seal for residue; wipe it clean and inspect for tears.

Common part-related fixes for this model

If the basic checks do not solve it, these are frequent repair paths on dishwashers:

Problem you see	Common culprit	Example part for SHE3AR56UC
Won’t fill or fills slowly	Water inlet valve	Dishwasher water inlet valve 00622058
Won’t drain, water left behind	Drain pump or drain restriction	Drain pump 00611332
Door area dripping	Door seal not sealing	Sealing 00645141

Why it matters

Most “Bosch dishwasher problems” start as airflow or water-flow restrictions. Keeping the filter, spray arms, and drain path clear prevents repeat clogs, improves cleaning, and reduces strain on the pump and valve.

Helpful references for troubleshooting

• Use the SHE3AR56UC owner’s manual for the correct care and maintenance steps and self-help checks.
• If you’re seeing an error display, match it to symptoms using Bosch dishwasher error codes.

You can order replacement parts for SHE3AR56UC from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes. Most Bosch built-in dishwashers, including the Bosch SHE3AR56UC, fit a standard 24-inch cabinet opening; the key is confirming your cutout width and height and that the drain hose is routed correctly for proper draining. See the installation guide for the exact opening requirements.

What “standard size” means for built-in dishwashers

For most U.S. kitchens, “standard” refers to a 24-inch class built-in dishwasher designed to slide into a cabinet cutout.

Typical built-in dishwasher fit targets:

• Width: about 24 inches (the cutout is usually slightly wider)
• Height: adjustable legs help match common countertop heights
• Depth: designed to align with standard base cabinets

Model-specific opening requirements to check

For the Bosch SHE3AR56UC installation, the cutout measurements called out in the installation instructions include:

• Opening height: at least 34 inches
• Opening width: 23 5/8 inches (60 to 61 cm)

Also confirm the plumbing reach:

• Drain hose length should not exceed 92 inches unless you use the specified extension method
• A portion of the drain hose must be raised at least 20 inches above the floor (high loop) to help prevent draining problems

Fit item	What to verify before install	Why it matters
Cabinet opening width	Matches the specified cutout range	Prevents binding and door alignment issues
Cabinet opening height	At least 34 inches	Ensures the unit can slide in and level correctly
Drain hose routing	High loop (min 20 inches)	Helps prevent poor draining and backflow
Electrical supply	120V, 60 Hz on a dedicated 15A circuit	Prevents nuisance trips and power issues

Why it matters

A dishwasher can be “standard size” and still not install cleanly if the cabinet opening is too tight, the unit cannot be leveled, or the drain hose is routed too low. Getting the cutout and drain loop right prevents leaks, poor draining, and door fit problems.

Parts that commonly come up during installation or fit issues

If you find damaged hoses, leaking connections, or drainage problems during install, these model-compatible parts are commonly involved:

• Dishwasher drain hose 00668108
• Dishwasher water inlet valve 00622058
• Dishwasher door seal 00645141

For additional replacement parts by model number, we list parts for this dishwasher on the model page, and you can also search by model on Sears PartsDirect.

Last updated: February 2026

On a Bosch dishwasher like model SHE3AR56UC, E-07 points to a drying airflow problem (the unit is not moving air the way it expects during drying). In many cases, moisture or water intrusion around the drying fan area triggers the code, even when the fan motor itself is not failed.

What to do first (safe, quick checks)

• Turn off power at the breaker (dishwashers use a dedicated 120V circuit); confirm the control panel is dark.
• Shut off the hot water supply valve before moving the unit.
• If the dishwasher was recently installed or moved, confirm it is level and secured; an out-of-level tub can contribute to water collecting where it should not.
• Run the kitchen faucet hot water for a minute before the next cycle (helps overall performance once the issue is corrected).
• Review the error display and reset steps in the owner's manual.

Common causes of E-07 on Bosch dishwashers

E-07 is usually tied to one of these conditions:

• Water or heavy condensation reaching the fan area during the dry portion of the cycle
• Restricted airflow (blocked vent path, heavy soil buildup, or internal obstructions)
• Drain or fill issues that leave extra water behind (which can increase steam and moisture where it should not be)
• A true fan circuit problem (less common than moisture-related triggers)

Parts that are often involved when symptoms overlap

If you also see poor draining, standing water, or intermittent filling, these model-matched parts are common suspects:

Symptom you notice	What to check	Model-matched part option
Standing water after cycle	Drain path and pump	Drain pump 00611332
Slow drain or backflow	Drain hose routing and check valve	Dishwasher check valve 00611320
Not filling or weak fill	Supply valve and inlet valve	Dishwasher water inlet valve 00622058

Why it matters

When the dishwasher cannot manage drying airflow correctly, it can leave dishes wet and can also cause repeated error stops. Fixing the underlying moisture, drain, or airflow issue prevents repeat E-07 events and protects key components like the control and wiring.

Helpful reference

For code definitions and related symptoms, we use the Bosch dishwasher error codes guide alongside the model documentation.

If you need to order replacement parts for SHE3AR56UC, use the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026