Kenmore 10653659300 refrigerator Parts

On Kenmore side-by-side refrigerator model 10653659300, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. You can confirm the exact label location and what it looks like in the 10653659300 owner's manual.

Where to look (fast checklist)

• Open the refrigerator (not freezer) door.
• Look along the inside side walls of the fresh food compartment.
• Check near the upper side wall area first, then scan downward.
• Look for a model and serial number label (often a white or silver sticker/plate).
• Wipe condensation or smudges off the label so the full number is readable.

What you should write down

Record these items exactly as shown on the label:

• Model number (for this unit, it starts with 106)
• Serial number
• Purchase date (from your receipt, if available)

Item	Why we need it	Example format
Model number	Ensures parts match your exact refrigerator	10653659300
Serial number	Helps confirm production details and variations	Letters + numbers
Purchase date	Useful for maintenance history and documentation	MM/DD/YYYY

Why it matters

Kenmore refrigerators can have small design changes within the same series. Using the exact model number from the inside-wall label helps us match the correct parts list, diagrams, and repair instructions for your specific side-by-side refrigerator.

If you are ordering parts, start with the parts list for model 10653659300 on this page; you can also search by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; the exact width depends on the specific model and door style. For your Kenmore 10653659300, we recommend confirming the cabinet and door-clearance dimensions in the 10653659300 owner's manual.

Typical width ranges (what you can expect)

Side-by-side refrigerators commonly fall into these width buckets:

• 32 to 33 inches: space-saving models
• 35 to 36 inches: most full-size side-by-sides
• 42 inches: built-in style (less common)

If you are measuring for a replacement or a tight opening, plan for door swing and airflow space, not just the cabinet width.

How to measure width the right way

Use a tape measure and capture both the appliance and the opening:

• Measure cabinet width (main box, doors closed)
• Measure overall width with doors/handles (often wider than the cabinet)
• Measure the opening width at the front and back (walls are not always square)
• Check door swing clearance if the refrigerator sits next to a wall
• Confirm you have room to pull the unit out for service and cleaning

Clearance guidance (from the installation requirements)

Your Kenmore 10653659300 needs ventilation and wall clearance so the doors can open properly.

Location	Typical minimum clearance
Each side and top	1/2 inch
Next to a fixed wall (for door swing)	2 inches

For the most accurate placement details for your kitchen layout, use the 10653659300 installation guide.

Why it matters

Width is only part of fit. A refrigerator that “fits” the opening can still be a problem if the doors cannot open fully, the ice maker water line gets pinched, or airflow is restricted, which can hurt cooling performance.

Last updated: February 2026

Kenmore Elite is a product line, not a single refrigerator size; cubic feet depends on the exact Kenmore Elite model number. For your Kenmore 10653659300 side-by-side refrigerator, the capacity is listed in the specifications section of the 10653659300 owner's manual.

How to find the cubic feet for your exact Kenmore Elite

Use the model number on the rating label (usually inside the fresh food compartment on a side wall) and then confirm capacity in the manual.

• Locate the full model number (for example, 10653659300)
• Open the specifications section in the manual
• Look for “capacity”, “total capacity”, or “cubic feet (cu. ft.)”
• If you see separate numbers, add refrigerator + freezer for total capacity
• Match the capacity to your exact configuration (ice maker, dispenser, shelf layout)

Typical capacity ranges (for quick comparison)

Most Kenmore side-by-side refrigerators fall into these ranges; your exact number is model-specific.

Refrigerator type	Typical total capacity	Notes
Side-by-side	20 to 26 cu. ft.	Narrower compartments, tall freezer section
French door	25 to 30+ cu. ft.	Wider shelves, bottom freezer drawer
Top freezer	14 to 21 cu. ft.	Often smaller footprint

Why it matters

Cubic feet affects how much food you can store, how you set expectations for cooling recovery after door openings, and which storage parts fit best (bins, pans, shelves). If you are replacing storage components, ordering by model helps ensure the right fit.

If you need replacement parts for your Kenmore 10653659300 (for example, a leaking water system can reduce ice production), we stock model-matched parts like the refrigerator inlet valve W10408179. You can also search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore Elite refrigerators most often have cooling problems, frost buildup, unusual noises, and water or ice dispenser issues. On Kenmore model 10653659300, these symptoms commonly trace back to airflow restrictions, defrost-system faults, or water-supply and filtration problems; our 10653659300 owner's manual covers model-specific troubleshooting.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: dirty condenser coils, failed evaporator fan, sealed-system or compressor start issues
• Frost buildup on the back wall or in the freezer: defrost heater, defrost thermostat (bi-metal), or defrost control problems
• Loud humming, rattling, or grinding: condenser fan or evaporator fan issues; ice buildup contacting the fan blade
• Water leaking or puddles: clogged/iced defrost drain, door left ajar, or water line connection issues
• Low water flow or dripping at the dispenser: clogged or misinstalled filter, air in the water lines, or a weak inlet valve

Quick checks we recommend before replacing parts

1. Confirm doors close fully and seals are making contact all the way around.
2. Set temperatures to typical targets: 0°F freezer, 37°F fresh food.
3. Clean condenser coils and verify the condenser fan runs when the compressor runs.
4. If dispenser flow is weak, remove and reinstall the filter correctly; flush water for 24 to 72 hours of normal use to clear air.
5. If frost is heavy, unplug and fully defrost, then watch for frost returning within a few days (a strong sign of a defrost failure).

Parts that commonly fix these problems on model 10653659300

Symptom	Common system	Example part on this model
Frost buildup, warm fridge	Defrost system	Refrigerator defrost bi-metal WPW10225581, refrigerator heater WP2323198
Weak water flow, no ice	Water supply	Refrigerator inlet valve W10408179
Poor airflow, warm sections	Air circulation	Refrigerator air diffuser WP2216112

Why it matters

Cooling and frost issues usually get worse over time; restricted airflow and heavy ice buildup can drive longer run times, temperature swings, and food spoilage. Water-flow problems can also reduce ice production and cause dispenser dripping.

Ordering the right replacement

We list model-matched parts for Kenmore 10653659300 on this page; for additional model lookups and ordering, use Sears PartsDirect.

Last updated: February 2026

Water leaking from the bottom of your Kenmore 10653659300 refrigerator is typically caused by a clogged or frozen defrost drain (defrost water backs up and spills out) or a water-supply leak from the dispenser/ice maker line or valve. Use the 10653659300 owner's manual to follow the correct access and water-supply checks.

Quick checks (start here)

• Look for ice or standing water on the freezer floor; this points to a blocked defrost drain.
• Check the drip pan area underneath for overflow after a defrost cycle.
• Inspect the home water line for kinks; confirm the shutoff valve is fully open.
• Check for wet fittings behind the refrigerator (tubing connections).
• If the leak happens only during ice making or dispensing, suspect the inlet valve or a connection.

Defrost drain overflow (most common)

When the drain trough or drain tube plugs with ice or debris, defrost water cannot reach the drain pan.

What we do:

• Unplug the refrigerator.
• Melt ice in the drain trough using warm water.
• Flush the drain with warm water until it runs freely to the pan.

Water-supply and dispenser-related leaks

The manual highlights common causes: shutoff valve not on, kinked home water line, and a clogged or incorrectly installed water filter. Air in the lines can also cause dispenser dripping for 24 to 72 hours after service or a filter change.

Parts that commonly fix water-supply leaks

Symptom	What it often means	Part to consider
Leak only when dispensing water or making ice	Valve not sealing or connection leak	Refrigerator inlet valve W10408179
Drips around the filter area	Cracked housing or poor seal	Refrigerator water filter housing WP2186443
Slow flow plus dripping	Filter not seated or clogged	Reseat or replace the filter

Why it matters

Leaks can damage flooring and create ice buildup that restricts airflow, which can lead to warm temperatures.

You can order model-matched replacement parts from the parts list for Kenmore 10653659300, or search by model number on Sears PartsDirect.

Last updated: February 2026