Owner’s manual
Where is the model number on a chainsaw?
On the Craftsman gas chainsaw model 360352010, the model number is typically printed on a sticker or stamped on a metal ID plate on the saw body. Use the owner's manual to confirm the correct model number before ordering parts or looking up service information.
Common places to check on a gas chainsaw
Look for a label or plate in these spots (wipe off oil and sawdust first):
- On the rear handle area near the trigger
- On the starter housing (recoil starter cover)
- Near the fuel tank or oil tank caps
- On the bottom of the powerhead (underside of the saw)
- Near the bar mount studs where the guide bar and clutch cover attach
How to read the tag correctly
Model tags can include extra numbers (serial, production codes). For parts lookup, focus on the model number.
| What you see on the tag | What it means | What to use for parts |
|---|---|---|
| Model number | Identifies the exact chainsaw design | Use 360352010 |
| Serial number | Identifies your individual unit | Keep for records |
| Type/code | Production/run info | Usually not needed |
Why it matters
Using the exact model number helps us match the correct diagrams and parts for your Craftsman chainsaw, including fit-critical items like the guide bar, chain, fuel system parts, and ignition components.
Quick tip before ordering
- Match the model number exactly (all digits)
- If the tag is missing or unreadable, compare your saw to the parts diagrams and specs in the owner's manual
- When replacing cutting components, verify bar length and mount pattern before purchasing
Last updated: February 2026
How to look up chainsaw serial number?
On the Craftsman chainsaw model 360352010, the serial number is identified in the operator documentation as a labeled item on the saw (often printed or stamped on the housing). Use the serial number to confirm the exact version of your saw when ordering parts or checking specifications in the owner's manual.
Where to find the serial number on model 360352010
In the “Know your chain saw” diagram, the serial number is shown as a specific callout on the saw. Check these common locations on the powerhead:
- On a flat area of the crankcase or engine housing
- Near the muffler area on the side of the engine
- Around the starter housing area
- Near the on off switch or control side of the handle
- On a label plate or stamped pad on the housing
How to record it correctly
Serial numbers can be hard to read if the housing is oily or scratched. We recommend:
- Wipe the area clean with a rag before reading
- Use a flashlight and view from multiple angles
- Write down the full serial number exactly as shown
- Take a clear photo for your records
- Keep it with your purchase receipt and maintenance notes
Why it matters
The serial number helps match the correct parts and service information for your specific saw build. That is especially important for wear items like the guide bar, chain, fuel system parts, and ignition components.
Quick checklist
| What you need | Why you need it | Where to use it |
|---|---|---|
| Model number: 360352010 | Identifies the product family | Parts lookup and manual |
| Serial number | Identifies the exact unit/version | Parts confirmation and service reference |
Last updated: February 2026
What company makes Craftsman chainsaws?
Craftsman chainsaws are built by different manufacturers depending on the model and production era; “Craftsman” is the brand name, not a single factory. For your Craftsman model 360352010, the most reliable way to identify the exact manufacturer and service details is to use the identification and parts information in the owner's manual.
How to identify who made your specific Craftsman 360352010
We use the model and product labeling to match the correct parts, diagrams, and service procedures.
- Check the data plate and any emissions label on the saw body
- Match the full model number 360352010 exactly (no extra digits)
- Use the illustrated parts list in the owner's manual to confirm assemblies and part descriptions
- Compare your saw’s controls and housing to the manual diagrams
- Order parts by model number to avoid look-alike fit issues
Why the manufacturer can vary (and why it matters)
Craftsman is a brand used across many product lines, and manufacturing can change over time. The maker matters because it affects:
- Carburetor and fuel line routing
- Ignition module and flywheel style
- Bar and chain mounting pattern
- Oil pump and oiler pickup design
- Exact fasteners, seals, and gaskets
Parts and service info you can trust for this model
For model 360352010, we recommend using the manual and the model-specific parts list to stay aligned with the correct build.
| What you need | Best source to use | Why |
|---|---|---|
| Exact diagrams and part callouts | Owner's manual | Confirms the correct configuration |
| Replacement cutting attachment fit | Parts list for model 360352010 | Prevents bar/chain mismatch |
| Bar replacement option shown for this model | Bar 200PXBK095 | Ensures the mounting pattern matches |
Quick tip if you are troubleshooting instead of buying parts
If the real issue is starting or running quality (not the manufacturer name), use symptom-based checks first (fuel mix, spark, air filter, carburetor settings). A lot of “who made it?” questions come up when a saw is hard to start.
- Verify fresh fuel mix and correct ratio
- Confirm bar and chain oil is filled (use bar and chain oil, not motor oil)
- Inspect the spark plug condition and gap
- Check for cracked fuel lines or loose connections
- Clean the air filter and check for restricted exhaust
Why it matters
Correct manufacturer identification helps you choose parts that fit the crankcase, fuel system, and cutting attachment correctly, which prevents leaks, poor running, and premature bar and chain wear.
Last updated: February 2026
Can I use an Oregon chain on a Craftsman chainsaw?
Yes, you can use an Oregon chain on your Craftsman 360352010 gas chainsaw as long as the chain’s pitch, gauge, and drive link count match your bar and sprocket. Our guidance is to use only recommended Craftsman accessories and replacement parts for safest operation; confirm the exact chain specs in the owner's manual.
What must match for compatibility
To run correctly and oil properly, the replacement chain must match these specs:
- Pitch (commonly 3/8 in low profile on many homeowner saws)
- Gauge (the thickness of the drive links)
- Drive link count (must match the bar length and bar groove)
- Bar mount and nose sprocket type (if applicable)
- Sprocket condition (a worn sprocket can quickly damage a new chain)
Quick fit check (before you buy)
Use this checklist to avoid a chain that will not tension correctly or will derail:
- Read the pitch and gauge stamped on the guide bar, or look them up in the owner's manual
- Count drive links on your current chain (or match the number printed on the chain package)
- Make sure the chain sits fully in the bar groove and the cutters face forward on the top run
- Set chain tension correctly; a too-loose chain can jump the bar
- Fill bar and chain oil every time you fuel up; the manual notes the saw uses about one tank of bar oil per tank of fuel
Oregon chain vs Craftsman chain: what changes and what does not
| Item | Must match exactly | Brand can vary |
|---|---|---|
| Pitch | Yes | No |
| Gauge | Yes | No |
| Drive links | Yes | No |
| Cutter style (low-kickback, etc.) | Recommended to match | Yes |
Why it matters
A mismatched chain can cut poorly, wear the bar rails faster, and increase kickback risk. The manual also warns that using non-recommended parts and accessories may be hazardous, so matching specs and setting correct chain tension are critical.
Last updated: February 2026
Do you use 40 1 or 50 1 gas in a chainsaw?
For the Craftsman 360352010 gas chainsaw, we use a 40:1 fuel mix (regular unleaded gasoline mixed with high-quality 2-cycle air-cooled engine oil). Using the correct ratio prevents overheating, poor performance, and engine seizure; see the owner's manual for the fuel mixture chart and cautions.
Correct mix ratio for model 360352010
Use 40 parts gasoline to 1 part 2-cycle oil.
Fuel mixture chart (from the manual):
| Gasoline amount | 40:1 oil amount |
|---|---|
| 1 gallon | 3.2 ounces |
| 2.5 gallons | 8.0 ounces |
How to mix fuel the right way
- Use fresh regular unleaded gasoline.
- Use 2-cycle air-cooled engine oil (not automotive or marine oil).
- Premix gas and oil in a clean, approved fuel container; do not mix in the saw’s tank.
- Shake the container before fueling to keep the mix uniform.
- If fuel will sit 30 days or longer, plan for storage steps (see below).
What happens if you use 50:1 in a 40:1 saw
Running 50:1 in a saw designed for 40:1 reduces lubrication. That can lead to:
- Hotter running temperatures
- Accelerated wear on bearings and moving parts
- Higher risk of scoring, seizure, and hard starting
Storage and fuel freshness tips
Old fuel is a top cause of starting and running problems in gas chainsaws.
- Do not store gasoline from one season to the next.
- Alcohol-blended fuels can attract moisture and separate during storage.
- For storage of 30 days or more, drain the tank and run the engine until it stops (fuel lines and carburetor empty).
- Use fresh mix next season; replace rusty fuel cans to avoid contamination.
Why it matters
Your 360352010 is a 2-cycle engine; the oil in the fuel mix is the engine’s lubrication system. The correct 40:1 ratio protects the crank bearings and cylinder while keeping starting and cutting performance consistent.
Last updated: February 2026
