Kenmore 79551014010 refrigerator Parts

The exact cubic foot capacity for Kenmore model 79551014010 is listed on the model’s rating label and in the specifications section of the 79551014010 owner's manual. The “795” prefix identifies the manufacturer series (commonly LG-built for Kenmore), but it does not indicate capacity by itself.

• Check the rating label inside the fresh food compartment (often on a side wall near the crisper area).
• Look in the specifications section of the 79551014010 owner's manual.
• If the label is hard to read, take a photo and zoom in; the capacity is usually shown as total volume.
• If you are measuring for fit, also confirm overall width, height, and depth from the manual.

Most Kenmore side-by-side refrigerators in the 795 series commonly fall in this range:

Cubic feet helps you compare storage space across models, but it also affects real-world performance factors like how quickly temperatures recover after door openings and how much airflow space you need around shelves and vents.

If you are checking capacity because storage seems tight due to ice or water system issues, our guide on how to prevent water dispenser and ice maker problems can help you reduce clogs, leaks, and ice buildup that steals usable space.

Last updated: February 2026

Kenmore model numbers tell us the appliance type and the manufacturing source; for your Kenmore side-by-side refrigerator model 79551014010, the 795 prefix identifies the manufacturer family, and the remaining digits narrow down the exact design and feature set. For exact label location and recording details, use the 79551014010 owner's manual.

On Kenmore 79551014010 refrigerators, the identification label is located inside the fresh food (refrigerator) compartment on the right-hand side.

• Open the refrigerator door and look along the right interior wall
• Write down the full model number and serial number exactly as shown
• Take a clear photo of the label for parts ordering and service calls
• Keep the information with your purchase date and receipt

Kenmore model numbers are usually read in two parts: a prefix (manufacturer family) plus a base model and variation digits.

• Prefix (often first 3 digits): points to the manufacturing source/family
• Middle digits: identify the base platform (cabinet, cooling system, dispenser style)
• Ending digits: indicate revisions, color codes, or feature variations

Using the full model number prevents ordering the wrong door bin, water system part, or control component because small digit changes can mean different shelves, wiring, or dispenser layouts.

• Parts can vary by revision even within the same 795 family
• Diagrams and troubleshooting steps match the exact configuration
• Water filter and dispenser components are especially model-sensitive

If you are working on water or dispenser issues after identifying the model, these guides are the most useful next steps:

• How to replace the water filter in a Kenmore refrigerator
• How to disassemble a Kenmore refrigerator dispenser

Last updated: February 2026

To replace the water filter in your Kenmore 79551014010 side-by-side refrigerator, remove the old filter (or substitute cap), install the new filter with a quarter-turn to lock, then flush 2.5 gallons of water and reset the filter light by holding Filter Reset for 3 seconds. See the 79551014010 owner's manual for the exact filter location and diagrams.

• Turn off the ice maker (optional but helpful while purging).
• Remove the filter or the filter substitute cap by turning it counterclockwise a quarter turn and pulling it down.
• Remove the red cap from the new filter.
• Insert the two tabs on the filter tip into the two slots in the filter receptacle.
• Turn the filter to the right (clockwise) a quarter turn until it locks; the lock symbol aligns with the indicator arrow.
• Turn the household water supply back on (if you shut it off).

After installing the new filter, we recommend purging air and carbon fines:

• Dispense 2.5 gallons (9.46 L) of water.
• Use a cycle of 30 seconds ON, 60 seconds OFF until you reach the total.
• Open the refrigerator door and check the shelf and filter area for leaks.

On this model, the filter status light is reset at the dispenser:

• Press and hold Filter Reset for 3 seconds to turn off the filter status light.

A properly installed and purged water filter helps protect the water inlet valve and dispenser system, improves taste and flow, and prevents leaks caused by a missing substitute cap or a filter that is not fully locked.

For more filter tips and common Kenmore filter styles, use how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

Most Kenmore side-by-side refrigerators measure about 33 to 36 inches wide overall; for your Kenmore 79551014010, use the product dimensions section in the 79551014010 owner's manual to confirm the exact width for your specific configuration (doors and handles can change the true “widest point”).

Refrigerator width is commonly listed in a few different ways. For planning, we recommend checking all of these:

• Cabinet width: the main box, without doors and handles
• Overall width: doors installed, typically the number used for fit
• Width with handles: often the widest point on side-by-side models
• Door swing clearance: extra space needed to open doors fully

Measure before delivery or before reinstalling after a repair:

• Measure the opening width at the front and back (walls can be out of square)
• Measure the narrowest doorway the refrigerator must pass through
• Allow clearance for handles and door edges
• Leave ventilation space behind and above for proper air circulation
• Confirm the unit can be leveled so doors close correctly (leveling affects alignment)

Use this as a practical checklist while you compare your opening to the refrigerator specs.

A side-by-side that is even 1 inch too wide can get stuck at a doorway or rub cabinets. Confirming the exact width for Kenmore 79551014010 in the manual also helps you maintain the clearances needed for stable temperatures and efficient operation.

Last updated: February 2026

Most Kenmore refrigerators last 10 to 15 years on average. For your Kenmore 79551014010 side-by-side refrigerator, regular care like cleaning, keeping door gaskets sealing, and maintaining good airflow helps you reach (and often exceed) that typical lifespan; see the 79551014010 owner's manual.

These are the ranges we see most often for household refrigerators under normal use.

We recommend focusing on the maintenance items that reduce compressor run time and prevent moisture and airflow problems.

• Keep the doors closing tightly; clean and inspect the gaskets regularly
• Open the doors less often and organize food so the door is open for less time
• Maintain airflow inside; do not block vents with packages
• Clean spills and odors promptly to protect liners, shelves, and seals
• After a move or power interruption, allow proper cool-down time before judging performance

Use these signs to decide whether you are seeing normal wear or a problem worth troubleshooting.

• Normal: compressor runs more in warm rooms or after frequent door openings (modern units can run much of the day)
• Normal: up to 24 hours to cool completely after plugging in or major loading
• Needs attention: doors do not shut firmly or you see condensation around the door edges
• Needs attention: warm temperatures plus unusual noises from the fan area or poor airflow

A refrigerator that runs longer than necessary wears the compressor and electrical components faster. Simple habits that reduce heat load and air leaks can add years of service life and help keep food temperatures stable.

Last updated: February 2026

On Kenmore Coldspot refrigerators like model 79551014010, the model and serial number are printed on an identification label inside the fresh food (refrigerator) compartment; it’s located on the right-hand side wall. Use the exact model number when ordering parts or scheduling service.

• Open the refrigerator (fresh food) door
• Look along the right interior wall of the refrigerator compartment
• Check near the crisper drawer area and shelf supports
• Use a flashlight; labels can be faint or partially covered

Even within the Kenmore Coldspot line, labels can vary by design. If the right-side interior wall label is missing or damaged, also check:

• Inside the door liner (near the hinge side)
• Behind or just above the lower crisper drawers
• Along the cabinet frame at the door opening
• Near the base grille or kick plate area

We use the model number to match the correct Kenmore side-by-side refrigerator parts (water inlet valve, thermistor, door hinge, ice maker components). A single digit difference can change the correct part fit.

For diagrams and model identification details, refer to the 79551014010 owner's manual.

Last updated: February 2026

On Kenmore model 79551014010, a water dispenser usually stops working because the household water supply is off or restricted, the filter is clogged, the door water line is frozen, or the dispenser switch/valve is not opening. Use the checks below, then confirm dispenser operation details in the 79551014010 owner's manual.

• Confirm the shutoff valve to the refrigerator is fully open.
• Dispense water for 2 minutes total (in 15 to 30 second bursts) to purge air after a filter change or water outage.
• Replace the water filter if flow is slow or the dispenser sounds strained.
• Check the freezer temperature; if it is too cold, the door water line can freeze.
• Inspect the dispenser area for ice or blockage; keep hands out of the dispenser opening.

A partially closed valve or low house pressure can stop dispensing.

• Make sure the supply line is not kinked behind the cabinet.
• If you hear banging in the pipes (water hammer), correct that before it damages plumbing.

If the freezer runs cold or vents are blocked, the line in the door can freeze.

• Open and clear air vents so cold air circulates normally.
• If the line is frozen, gently thaw the door area (no high heat).

A clogged filter or a failing valve can restrict flow.

• If the valve hums but water does not flow, the valve can be sticking.
• If you suspect the valve, match it to the correct replacement: refrigerator water inlet valve 5221JA2006D.

The dispenser recess on this model is sized for typical cups and bottles:

A restricted water path makes the dispenser unreliable and can also reduce ice maker performance. Fixing the root cause (supply, filter, frozen line, or valve) restores steady flow and helps protect internal water components.

Last updated: February 2026