Kenmore 10657069601 side-by-side refrigerator Parts

To replace the ice maker in your Kenmore 10657069601 side-by-side refrigerator, we turn the ice maker off, shut off the water supply, remove the ice bin and mounting screws, swap the assembly, then restore water and power and allow time for ice production. Use the owner's manual for model-specific access and switch locations.

Before you start (safety and prep)

• Unplug the refrigerator or switch off power at the breaker.
• Turn off the household water supply to the refrigerator.
• Empty and remove the ice container from the freezer door.
• Protect the floor with towels; a small amount of water can spill.
• Keep screws and brackets organized for reassembly.

Replacement steps (typical for this model style)

1. Turn the ice maker OFF using the On/Off switch in the freezer compartment (top right area on this style).
2. Remove the ice container and any shelves/bins blocking access.
3. Remove the ice maker mounting screws and gently pull the ice maker forward.
4. Disconnect the wiring harness plug.
5. Disconnect the fill tube or water feed connection (if present at the ice maker).
6. Install the new ice maker, reconnect wiring and water feed, then secure mounting screws.
7. Reinstall the ice container and any shelves/bins.
8. Turn water back on, restore power, and switch the ice maker ON.

If you are replacing the complete assembly, the correct part for this model is the refrigerator ice maker 2198597.

What to expect after installation

What happens	Normal timeframe	What we recommend
First ice drops	Up to 24 hours	Keep freezer at 0°F and doors closed as much as possible
Ice bin fills	Up to 3 days	Let it run normally; avoid frequent dispensing
Initial ice quality	First few batches	Discard the first 3 batches to flush the system

Quick checks if it still will not make ice

• Confirm the ice maker switch is in the ON position.
• Make sure the ice bin is seated fully on the door.
• Verify the water supply valve is fully open and the line is not kinked.
• Replace an overdue filter; restricted flow can reduce ice production (use refrigerator water filter EDR3RXD1).
• If the ice maker is not filling with water, test the refrigerator inlet valve W10408179.

Why it matters

A correct ice maker replacement restores reliable ice production and prevents issues like small cubes, hollow cubes, or no-fill conditions caused by poor water flow, mis-seated bins, or a failing inlet valve.

Last updated: February 2026

Yes, replacing the ice maker is usually worth it on a Kenmore 10657069601 side-by-side refrigerator when the rest of the unit cools well and you rely on ice daily; an ice maker is a modular repair and is often far less expensive than replacing the entire refrigerator. Use the 10657069601 owner's manual to confirm basic ice maker operation before ordering parts.

Quick decision checklist

• The refrigerator and freezer temperatures are stable (food stays safely cold).
• The ice maker is turned ON (switch in the freezer compartment) and the bin is not overfilled.
• You have a working water supply to the refrigerator (no kinks, valve open).
• You are seeing classic ice maker failures (no ice, small cubes, leaking, or jammed ejector).
• The repair is limited to the ice maker assembly or water supply parts, not sealed-system cooling.

What to check first (no parts needed)

The manual notes it can take 24 hours to produce the first batch of ice and up to 3 days to fill the bin after startup; it also recommends discarding the first three batches. Before replacing anything:

• Verify the ice maker On/Off switch is set to ON.
• Wait the full timing window after turning it on or after a move.
• Avoid softened water if possible; it can reduce ice quality and damage ice maker components.
• Make sure nothing is stored on top of the ice maker or in the storage bin.

Common “worth it” repair paths for this model

If the refrigerator cools properly, these are the most common, targeted fixes:

Symptom	Most likely area	Part you may need
No ice, but dispenser water works	Ice maker module or internal mechanism	Refrigerator ice maker 2198597
No ice and no water at dispenser	Water supply into the refrigerator	Refrigerator inlet valve W10408179
Ice is slow or hollow	Water flow restriction	Genuine Kenmore refrigerator water filter EDR3RXD1

Why it matters

A failing ice maker can waste water, create leaks, and lead to clumping or overflow in the ice bin. Fixing the ice maker early helps protect the freezer compartment, wiring, and surrounding trim from moisture damage.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10657069601, the model and serial number are printed on the appliance’s model and serial number label. You will typically find that label inside the fresh food (refrigerator) compartment when you open the refrigerator door; use it to record the model number, serial number, and purchase date for service and parts matching.

Most common places to check

Look in these spots first (use a flashlight and wipe away any condensation so the print is readable):

• Inside the fresh food compartment on a side wall near the front
• On the ceiling of the fresh food compartment near the light housing
• On the frame around the fresh food door opening (door jamb area)
• Behind the crisper drawers on the side wall
• On the back exterior panel (less common, but worth a quick check)

How to read the tag and what to write down

We recommend copying the information exactly as shown on the label.

• Model number: use this to match parts diagrams and replacement parts
• Serial number: helps identify production details for your unit
• Purchase date: useful for your records and any warranty documentation

What you need	Example format	Why it matters
Model number	10657069601	Ensures correct parts fit
Serial number	Letters and numbers	Identifies your specific unit
Purchase date	Month/day/year	Helps with service history

Why it matters for parts and troubleshooting

Kenmore refrigerators can look similar across multiple model series, but parts like a water filter, ice maker, or inlet valve can vary by model. Using the exact model number helps us match the correct components and avoid returns.

Helpful next steps

• Confirm the model number before ordering any part
• Use the model number to cross-check instructions in the owner's manual
• If you are replacing the filter, match it by model; a common option for this model is the genuine Kenmore refrigerator water filter EDR3RXD1
• For broader parts searching by model number, use Sears PartsDirect

Last updated: February 2026

On the Kenmore 10657069601 side-by-side refrigerator, the water filter is located in the base grille below the freezer compartment door. You remove it by pressing the eject button and pulling straight out on the filter cap; you do not need to remove the base grille. See the 10657069601 owner's manual for the exact steps and illustrations.

How to find and remove the filter (base grille style)

• Open the freezer door and look at the base grille area below the freezer door.
• Locate the eject button next to the filter cap.
• Press the eject button, then pull straight out on the filter cap.
• Turn the cap counterclockwise to remove it from the old filter.
• Keep the cap; it is reused on the replacement filter.

What to expect when you pull the filter

Some water in the cartridge is normal, so a small spill can happen. We recommend:

• Put a towel under the base grille area.
• Keep the filter level as you pull it out.
• Avoid twisting the cap while removing the filter (pull straight out).

After you replace the filter

Once the new filter is installed, flush the water system and reset the filter status light.

Task	What to do	Why
Flush water	Dispense water in short intervals until flow is steady	Clears air and carbon fines
Reset light	Press and hold RESET for about 2 seconds	Changes status back to “Good”
Check for leaks	Inspect the cap and base grille area	Prevents drips and low flow

If you need the replacement cartridge for this model, use refrigerator water filter EDR3RXD1. You can also search by model number on Sears PartsDirect if you are matching additional water system parts.

Why it matters

Knowing the filter location helps you restore normal water flow, protect the inlet valve and ice maker from sediment, and keep dispenser taste and odor consistent.

Last updated: February 2026

Most Kenmore side-by-side refrigerators measure about 32 to 36 inches wide; for Kenmore 10657069601, use the dimension and clearance section in the 10657069601 owner’s manual to confirm the exact width for your kitchen opening.

Typical widths you will see

These are the common exterior width categories for side-by-side refrigerators:

• 32 to 33 inches: space-saving models
• 35 to 36 inches: most full-size side-by-sides
• 42 inches: built-in style units (less common)

Clearance you should plan for (real-world fit)

Width is only part of the space requirement; door swing and airflow clearances affect whether the refrigerator fits and functions correctly. The manual guidance for this model family includes:

• 1/2 inch (1.25 cm) on each side and at the top for ventilation
• 2 inches (5.08 cm) minimum on the hinge side next to a fixed wall (door swing clearance varies by setup)
• Extra space behind the unit if you have an ice maker water line connection

Quick planning table

What to measure	Measure to	Why it matters
Cabinet opening width	Inside of cabinets or walls	Confirms the refrigerator can slide in
Refrigerator overall width	Widest point (often handles)	Prevents binding or rubbing
Hinge-side clearance	Wall to hinge side	Allows doors to open fully

How we recommend measuring

• Measure the opening at the top, middle, and bottom.
• Measure the refrigerator at the widest point, including handles if they stick out.
• If you are tight on space, confirm door swing needs before installing.

Why it matters

Correct width and clearance help the doors seal properly, keep airflow moving across the condenser, and reduce temperature swings that can affect food storage.

If you are also planning maintenance while you have the unit pulled out, you can order model-matched parts from the parts list for 10657069601 or search by model on Sears PartsDirect.

Last updated: February 2026