Kenmore 10652572201 side-by-side refrigerator Parts

Most Kenmore side-by-side refrigerators measure about 32 to 36 inches wide; for your Kenmore 10652572201, the exact cabinet width and required clearances are listed in the 10652572201 owner's manual and the 10652572201 installation guide.

Typical width ranges (what you can expect)

Side-by-side refrigerators are commonly built in a few standard widths:

• 32 to 33 inches: space-saving models
• 35 to 36 inches: most common full-size width
• 42 inches: built-in style (less common)

Quick reference table

Refrigerator type	Typical width	Best for
Compact side-by-side	32 to 33 in.	tighter kitchens, smaller households
Standard side-by-side	35 to 36 in.	most kitchens, most capacities
Built-in side-by-side	~42 in.	custom cabinetry installations

How to measure width the right way

We recommend measuring before ordering parts, planning delivery, or adjusting cabinetry.

• Measure the cabinet width (left edge to right edge of the refrigerator body)
• Measure door clearance to ensure doors can swing fully
• Measure depth with doors closed if you are fitting into a tight alcove
• Confirm you have ventilation space; many installations call for about 1/2 inch on each side and at the top
• If the unit has an ice maker, allow extra room behind for the water line connection

Why it matters

Width is only part of fit. Door swing clearance and ventilation space affect cooling performance, ice maker water line routing, and whether you can remove bins and shelves without moving the refrigerator.

Last updated: February 2026

The Kenmore side-by-side refrigerator model 10652572201 has a total capacity of 21.9 cubic feet. This is the overall storage volume for both the fresh food compartment and the freezer combined.

How to confirm the capacity on your refrigerator

We recommend verifying the exact capacity using the model’s documentation and rating label.

• Check the specifications section in the 10652572201 owner's manual
• Look for the model and serial label inside the refrigerator compartment (typically on an inside wall)
• Compare the listed “total volume” or “total capacity” to 21.9 cu. ft.
• If your unit has a different configuration (shelves, bins, ice bucket), usable space can feel smaller even when total volume is the same

What “21.9 cu. ft.” means in practical terms

Total cubic feet is a standardized measurement of interior volume, not a guarantee of how much you can comfortably store.

Measurement type	What it represents	What can change it day to day
Total capacity (cu. ft.)	Combined interior volume of refrigerator + freezer	Shelf positions, ice bin size, stored items
Usable space	How much room you can actually use	Bulky packaging, air circulation needs, bin layout

Why it matters

Knowing the cubic feet helps when you are matching replacement parts (like shelves and bins), planning kitchen space, or comparing Kenmore refrigerator sizes. It also helps set realistic expectations for storage, especially in a side-by-side layout.

Last updated: February 2026

To reset your Kenmore refrigerator model 10652572201, we recommend a simple power reset: turn the temperature control to OFF, disconnect power for about 5 minutes, then restore power and set the control back to your normal setting. This clears many control glitches and restarts cooling.

Quick reset steps (safe power cycle)

• Turn the refrigerator control (thermostat or refrigerator/freezer control) to OFF.
• Unplug the refrigerator (or switch the circuit breaker OFF).
• Wait 5 minutes.
• Plug back in (or switch the breaker ON).
• Set the control back to the desired temperature setting.
• Allow up to 30 minutes to see normal operation resume after a reset or defrost cycle.

For the model-specific safety notes and control wording, follow the steps in the 10652572201 owner's manual.

If it still is not cooling after the reset

The manual guidance for digital-control models is to turn the unit OFF then ON again to reset; if cooling does not return, focus on airflow and basic checks before replacing parts.

• Make sure the refrigerator is plugged into a grounded 3-prong outlet.
• Check the house fuse or reset the circuit breaker.
• Confirm the control is not left in the OFF position.
• Check for blocked air vents and improve airflow around food packages.
• If the unit is in an automatic defrost cycle, recheck operation in 30 minutes.

Common symptoms and what they point to

Symptom after reset	Most common cause	What to do next
Lights work, no cooling	Control setting, airflow, defrost cycle	Verify settings, wait 30 minutes, clear vents
No water to ice maker/dispenser	Water supply or valve issue	Diagnose supply; consider refrigerator inlet valve W10408179
Ice maker not producing	Ice maker module or water supply	Check shutoff arm/switch; consider ice maker assembly 4317943

Why it matters

A proper reset restores normal control operation without guesswork. It also helps you separate a temporary electronic glitch or defrost cycle from issues like restricted airflow, water supply problems, or a failing component.

Last updated: February 2026

On Kenmore refrigerators, the model number is printed on the model and serial number label; for Kenmore model 10652572201, we look for that label inside the fresh food (refrigerator) compartment, typically on an inside wall. Use the exact model number to match the correct parts, manual, and installation instructions.

Where to find the model number label

We most often find the label in one of these spots:

• Inside the refrigerator compartment on an interior side wall
• On the inside wall behind the lower crisper drawer area
• Along the door frame when the refrigerator door is open
• Behind the lower kick plate or base grille area (varies by design)

If you see a number that starts with 106, that is a common Kenmore prefix for many side-by-side refrigerator models; the full model number (like 10652572201) is what we use for exact part matching.

What the model number tells us (and why it matters)

Kenmore model numbers help us identify the platform and the correct configuration for items like the ice maker, water system, and temperature controls.

Why it matters

Using the full model number prevents ordering the wrong part when there are small design changes across similar-looking refrigerators.

Quick checklist: model number vs. serial number

Item	What it’s used for	Example format
Model number	Identifies the exact refrigerator design for parts and manuals	10652572201
Serial number	Identifies the specific unit and production run	Letters and numbers

Next steps after you find it

Once you locate the label, we recommend:

• Write down the full model number and serial number exactly as shown
• Use the model number to confirm fit before ordering parts
• Reference the 10652572201 owner's manual for feature details and control settings
• Use the 10652572201 installation guide for leveling, door alignment, and water line hookup basics

Last updated: February 2026

A Kenmore Elite refrigerator typically lasts 10 to 15 years. For a Kenmore side-by-side like model 10652572201, consistent cleaning, correct door alignment, and prompt repair of cooling or ice maker issues are the biggest factors in reaching the high end of that range.

Typical lifespan and what to expect

Most modern refrigerators fall into a similar service-life window; Kenmore Elite models are no different.

• Average lifespan: 10 to 15 years
• Common “major repair” window: years 8 to 12 (ice maker, defrost, fan, water valve)
• Longest-lasting units: reach 15 years when seals stay tight and airflow stays clear

Lifespan range	What it usually means	What to do now
0 to 7 years	Mostly maintenance and minor parts	Keep coils and gaskets clean
8 to 12 years	Higher chance of part failures	Address symptoms early
13 to 15 years	End-of-life decisions start	Compare repair cost vs. replacement

Maintenance that extends life the most

The use and care guidance in the 10652572201 owner's manual focuses on routine care items that directly affect longevity.

• Clean the interior and spills regularly to prevent odors and corrosion
• Keep door gaskets clean so doors seal and the compressor runs less
• Confirm doors close and align correctly after moving or service
• Replace failed lights and address moisture issues quickly
• Follow vacation and moving care steps to prevent damage during downtime

Why it matters

A refrigerator that runs warmer than normal or has poor door sealing cycles longer, builds frost faster, and stresses the sealed refrigeration system. Preventive care reduces run time, helps food stay safe, and delays expensive repairs.

When a repair is the better move

If the cabinet is in good shape and cooling is otherwise stable, replacing common wear parts can add years of service. For example, water and ice issues often trace back to the water supply side (valves, tubing, ice maker components).

• Ice production problems: consider the ice maker assembly - refrigerator ice maker by whirlpool 4317943
• No water dispensing or slow fill: consider the refrigerator inlet valve W10408179

Last updated: February 2026