Owner’s manual
View engine
What engine does Craftsman riding mower use?
For Craftsman model 917288360, the operator’s manual identifies it as a lawn tractor with a low-emission engine and lists the tractor as 22.0 HP with a 46-inch mower deck. For the exact engine make and model (such as Briggs and Stratton), check the engine ID label and confirm it in the 917288360 owner's manual.
How to identify the exact engine on your tractor
Use these quick checks to match the engine correctly before ordering tune-up parts:
- Look for the engine model, type, and code label (commonly on the blower housing, valve cover area, or near the starter)
- Record the full ID exactly as printed (letters and numbers)
- Compare the ID to the engine information and specifications section in the manual
- If the label is dirty, wipe it clean; do not scrape off the printing
- Match parts by tractor model 917288360 and the engine ID, not by horsepower alone
Common engine-related symptoms and the parts that often fix them
If you are troubleshooting a no-start or click-no-crank condition, these model-matched parts are common fixes:
- Starter clicks but engine will not crank: check the lawn tractor starter solenoid 582042802
- Key turns but nothing happens: inspect the lawn tractor ignition switch 532193350
- Intermittent starting: inspect wiring and connectors; the ignition circuit is sensitive to loose terminals
Quick comparison: what each part does
| Part | What it controls | Typical failure sign |
|---|---|---|
| Starter solenoid | Sends battery power to the starter | Single click, no crank |
| Ignition switch | Routes power when key is turned | No dash power, no crank |
Why it matters
The exact engine make and model determines the correct spark plug, air filter, oil filter, and some ignition and fuel system parts. Using the engine ID prevents wrong-part returns and speeds up repairs.
You can order replacement parts for your Craftsman 917288360 from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
What model number is a Craftsman 6.75 lawn mower?
A “Craftsman 6.75” label by itself is not a single model number; it usually refers to the engine power class used on many different walk-behind mowers. For the Craftsman model page you’re on, the model number is 917288360, which is a front-engine lawn tractor, not a 6.75 walk-behind mower; confirm your mower’s exact model from the ID tag and compare it to the 917288360 owner's manual.
Where to find the correct model number on a Craftsman mower
Look for a model/serial tag in one of these common spots:
- Rear of the mower deck near the discharge chute
- On the handle support or rear frame crossbar
- Under the seat (riding units) or near the rear axle area
- On the engine shroud (often shows engine model, not the mower model)
Craftsman “917” numbers: what they mean
Many Craftsman outdoor power products use a 917.xxxxx style model number. The full number on the tag is what we use to match the right parts list and diagrams.
| What you see | What it usually identifies | Example |
|---|---|---|
| 6.75 (HP or ft-lb class) | Engine power class, not the mower model | “6.75” |
| Engine model/type code | The engine itself | Printed on engine shroud |
| 917.xxxxxxx | The mower/tractor model number | 917288360 |
Why it matters
Parts like belts, blades, ignition switches, and deck hardware are model-specific. Using only “6.75” can lead to ordering the wrong part.
If you’re troubleshooting a no-start or clicking issue
On model 917288360, common electrical no-start culprits include the ignition switch and starter solenoid. If your tractor clicks but won’t crank, these parts are often involved:
- Lawn tractor ignition switch 532193350
- Lawn tractor starter solenoid 582042802
- Battery connections and safety interlock switches (brake, PTO, seat)
You can also follow our step-by-step video guidance in riding lawn mower engine clicks but doesnt turn over video. For ordering, use the parts list for your exact model on this page, or search by the full model number on Sears PartsDirect.
Last updated: February 2026
What year was Craftsman 917288360 made?
Craftsman model 917288360 was sold across multiple production runs, so there is not one single “made year” for every unit. The most accurate way to pin down your tractor’s build timeframe is to match the model and serial information on the tractor to the details in the 917288360 owner's manual.
How to find the build timeframe on your tractor
Use the tractor’s identification label (commonly under the seat or on the frame near the seat pan) and record what you see.
- Locate the model/serial number plate under the seat area
- Write down the model number (917288360) and the serial number
- Compare the label information to the identification and specification sections in the manual
- If the label is dirty or faded, clean it gently and take a clear photo before writing it down
What we can confirm from the manual
The operator’s manual identifies the tractor as Model No. 917.28836 (the same model family as 917288360) and describes it as a 22.0 HP, 46-inch mower with electric start and automatic transmission.
Model number formatting (why it looks different)
| Where you see it | Example | What it means |
|---|---|---|
| Manual cover | 917.28836 | Dotted format used in manuals |
| Model page / label | 917288360 | Full model number format used for parts lookup |
Why it matters
The exact production run affects parts fitment and service details (for example, deck components, belts, and electrical parts). When you’re ordering or troubleshooting, using the model and serial from the ID plate helps us match the correct diagrams and replacement parts.
Last updated: February 2026
Where can I find my lawn mower engine model number?
On the Craftsman 917288360 front-engine lawn tractor, the engine model number is typically on an identification label or stamped into the engine metal, most often on the blower housing, valve cover area, or near the cylinder head. Use the location diagrams in the owner's manual to match what you see on your tractor.
Where to look on the engine (most common spots)
Check these areas with a flashlight and a rag to wipe off dirt and oil:
- Top of the engine near the cylinder head(s) or valve cover
- Blower housing (the shroud around the flywheel)
- Near the starter motor or starter solenoid area
- Along the engine block, close to where the muffler mounts
- On a sticker/plate near the air filter housing
How to read the numbers you find
Engine ID markings often include several fields. Here is what they usually mean:
| What you see | What it’s used for | Why it matters |
|---|---|---|
| Model | Identifies the engine family/design | Ensures correct tune-up and repair parts |
| Type/Spec | Identifies the exact configuration | Matches carburetor, ignition, and governor parts |
| Code/Serial | Production date/serial | Helps confirm the correct version |
Tips if the label is hard to find or unreadable
- Clean the area first; grass dust and oil can hide stamped numbers.
- Look for a flat, smooth metal pad; stamped IDs are often there.
- If the sticker is missing, check the opposite side of the engine; some IDs are duplicated.
- Record the full string exactly as shown (letters and numbers).
Why it matters
We use the engine model and spec/type to match the correct ignition, fuel, and starting components. For example, a no-start or clicking issue can point you toward electrical parts like the lawn tractor starter solenoid 582042802 or the lawn tractor ignition switch 532193350 once you confirm the exact engine identification.
Ordering the right parts
After you locate the engine model/spec, you can order replacement parts for Craftsman 917288360 from the parts list for this model, or search by the full engine ID on Sears PartsDirect.
Last updated: February 2026
