Kenmore 25368802018 top-mount refrigerator Parts

A top-mount refrigerator like Kenmore 25368802018 is usually reliable and space-efficient, but the main disadvantages are less convenient fresh-food access (you bend more), fewer premium organization features, and fewer built-in dispenser options compared with many bottom-freezer designs.

Common disadvantages (what you will notice day to day)

• Fresh-food section is lower: you bend more to reach produce drawers and lower shelves.
• Freezer is at eye level: great for frozen items, but it pushes everyday refrigerated items down.
• Typically fewer “premium” storage features: fewer adjustable bins, split shelves, and specialty drawers on many top-mount models.
• Less common to have external water/ice: many top-mount units do not include a door dispenser.
• Door swing and clearance needs: you may need extra side clearance if the hinge side is near a wall.

Installation and space considerations

Your installation setup can make a top-mount feel more or less convenient. For this Kenmore model, our installation guidance calls for clearances that help airflow and door access.

Area	Typical clearance guidance for this model type	Why it matters
Sides and top	3/8 inch	Helps ventilation and fit
Rear	1 inch	Helps airflow and connections
Room temperature	55°F to 110°F (preferred 70°F to 80°F)	Extreme temps can reduce cooling performance

For the exact placement, leveling, and door reversal steps, use the installation guide.

Ways to reduce the downsides

• Store everyday items on middle shelves to reduce bending.
• Use bins and drawer dividers to improve organization.
• Keep the door seals clean and flexible so the doors close easily.
• If doors feel awkward in your kitchen layout, consider reversing the door swing (follow the manual steps).
• Replace broken storage parts so shelves and drawers work as intended (for example, a damaged crisper can be replaced with the crisper drawer 240337103).

Why it matters

Most “disadvantages” of a top-mount refrigerator are really about ergonomics and kitchen workflow. If you access fresh food far more often than frozen food, the lower refrigerator compartment can feel less convenient over time.

If you need to order replacement parts for Kenmore 25368802018, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes. We still carry replacement parts for Kenmore refrigerators, including the Kenmore 25368802018 top-mount refrigerator. Use your model number to match parts correctly, then choose the exact component you need (for example, door gaskets, drawers, or a light bulb) from the parts list.

How to make sure you order the right part

• Confirm the full model number on the serial tag: 25368802018.
• Compare the part name and part ID, not just the photo.
• Check color and position (fresh food door vs freezer door) for gaskets and door parts.
• Use the diagrams to verify where the part installs.
• For installation and safety notes (unplugging power, clearances, leveling), follow the owner's manual.

Common Kenmore 25368802018 parts customers replace

Here are a few examples available for this model:

• Refrigerator light bulb 316538904 (interior light)
• Refrigerator gasket 242193213 (door seal, white)
• Frigidaire refrigerator door gasket (black) 241872512 (door seal, black)
• Crisper drawer - refrigerator storage component by frigidaire 240337103 (produce drawer)
• Refrigerator defrost heater 242044008 (defrost system)

Quick part selection guide

What’s happening	Likely part area	Example part on this model
Warm temps, frost buildup	Defrost system	Defrost heater, defrost thermostat
Door won’t seal, moisture inside	Door seal	Door gasket (match color/door)
Drawer cracked or missing	Storage components	Crisper drawer, drawer cover
No interior light	Lighting	Light bulb

Why it matters

Ordering by model number and matching the exact part ID helps prevent fit issues, air leaks, and repeat repairs. A correct door seal and proper airflow clearances also help your refrigerator maintain stable temperatures and run efficiently.

If you do not see the exact part you need listed for 25368802018, you can search by model number on Sears PartsDirect to expand your options.

Last updated: February 2026

If your Kenmore 25368802018 top-mount refrigerator is not leveled, the cabinet can rock and the doors may not close and seal correctly. That leads to warm air leaks, frost or moisture buildup, and temperature swings that can affect food storage.

Common problems you may notice

• Doors pop open or do not stay closed when opened halfway
• Gaps in the door gasket that let humid air in
• Frost buildup in the freezer or moisture in the fresh food section
• Uneven door alignment (one door looks higher than the other)
• Extra running time or inconsistent temperatures
• Drawers that feel harder to slide because the cabinet is twisted

Leveling targets for model 25368802018

Our installation guidance for this style of refrigerator is straightforward: all four corners should sit firmly on the floor, the cabinet should be level side-to-side, and it should tilt slightly from front to back so the doors close and seal.

What to check	What “correct” looks like	Why it helps
Cabinet contact	All 4 corners firmly on the floor	Prevents rocking and door misalignment
Side-to-side level	Left and right sides even	Helps doors line up and seal evenly
Front-to-back tilt	About 1/4 to 1/2 inch higher in front	Helps doors close freely and stay sealed

How we recommend leveling it (quick steps)

Use the method shown in the installation guide.

• Pull the refrigerator forward enough to work safely
• Remove the toe grille
• Adjust the front rollers or front leveling screws (depending on your version)
• Raise the front until doors close freely when opened halfway
• Recheck side-to-side level and door alignment
• Confirm the cabinet no longer rocks when you gently push on a corner

Why it matters

A small leveling issue can turn into ongoing air leaks at the door seal. Air leaks create frost, moisture, and temperature fluctuation, and they also make the compressor work harder than it should.

Parts that are commonly involved when doors will not seal

If leveling is correct but the door still will not seal, we typically check the gasket next.

• Refrigerator gasket 242193213 (door seal option)
• Frigidaire refrigerator door gasket (black) 241872512 (alternate color option)

You can order replacement parts for your Kenmore 25368802018 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

For Kenmore refrigerators like model 25368802018, the model number is printed on the serial plate inside the fresh food (refrigerator) compartment. Open the refrigerator door and look along the inside walls for a label that lists the model and serial number; then match that model number when ordering parts.

Where to look first (fastest checks)

• Inside the refrigerator compartment on the serial plate (most common location)
• Along the side wall near the crisper drawers
• On the ceiling area inside the fresh food section
• On the door frame area (around the gasket line)
• In the freezer compartment if you do not see it in the refrigerator section

What the label looks like and what to write down

The serial plate typically includes:

• Model number (for this series it often starts with 253.)
• Serial number
• Sometimes the purchase date is recorded separately in your paperwork

We recommend writing the model number exactly as shown (all digits) because even small differences can change which door gasket, evaporator fan motor, or light bulb fits.

Why it matters

Kenmore top-mount refrigerators can share similar styling but use different shelves, gaskets, and cooling parts. Using the correct model number helps you avoid ordering the wrong items and speeds up troubleshooting.

Quick ordering checklist

What to capture	Example for this page	Why it helps
Model number	25368802018	Ensures correct parts list
Serial number	From the serial plate	Helps confirm production details
Part needed	Door gasket, light bulb, crisper drawer	Narrows the correct diagram

If you are replacing common items, you can match your model number to the parts list and then select the exact replacement, such as the refrigerator light bulb 316538904 or the crisper drawer 240337103. For broader model searches and ordering, use the model number on Sears PartsDirect.

For model and serial plate location details and how the number is formatted, use the 25368802018 owner's manual.

Last updated: February 2026

Yes. On Kenmore top-mount refrigerator model 25368802018, many common parts are DIY-friendly (bins, drawers, door rails, light bulbs, and some fan components) if you unplug the refrigerator first and follow the safety and access steps in the 25368802018 owner's manual.

What you can usually replace yourself

These repairs are typically straightforward and do not involve sealed-system work:

• Storage parts such as a crisper drawer, drawer cover, and door shelf rail
• Door rack supports and dairy bin covers
• Light bulb replacement (unplug first; wear gloves)
• Door gasket replacement (takes patience to seat evenly)
• Evaporator fan blade replacement (only after safe access to the fan area)

Common DIY parts for this model (examples)

Part	Part ID	Typical reason to replace
Crisper drawer 240337103	240337103	Cracked or missing produce drawer
Refrigerator light bulb 316538904	316538904	Interior light out or dim
Refrigerator gasket 242193213	242193213	Poor seal, moisture, warm spots
Refrigerator evaporator fan blade 5308000010	5308000010	Fan noise or damaged blade

Safety steps we recommend before any repair

The manual for this model emphasizes basic electrical and handling safety.

• Unplug the refrigerator before cleaning or replacing a light bulb
• Do not use an extension cord or adapter plug
• Pull the refrigerator straight out to move it; avoid rocking side to side
• Wear gloves when replacing bulbs or working near sharp edges
• Use non-abrasive cleaners; avoid harsh chemicals on plastics and gaskets

When DIY is not the right choice

• Compressor or sealed-system repairs (refrigerant work)
• Filter drier replacement or any brazing/soldering
• Advanced electrical diagnosis beyond basic checks

Why it matters

DIY replacement restores storage function and door sealing, helps maintain stable temperatures, and reduces energy waste. Following the unplugging guidance also reduces shock risk.

You can order model-specific replacement parts from the parts list for 25368802018, or search by model number on Sears PartsDirect.

Last updated: February 2026