Kenmore 10672153111 refrigerator Parts

On the Kenmore 10672153111 top-mount refrigerator, the upper compartment is the freezer compartment (often just called the freezer). It is the section designed to keep foods frozen and it also supplies cold air that helps cool the fresh food section.

What you will find in the upper (freezer) section

Common freezer-area features on top-mount refrigerators include:

• Freezer shelf (wire or glass, depending on configuration)
• Freezer door bins or rails
• Air vents that circulate cold air
• Ice maker area (if equipped)
• Temperature control access (varies by model)

For the exact feature layout and names used for your refrigerator, use the 10672153111 owner's manual.

Freezer vs. refrigerator: quick comparison

Section	Typical location	Main purpose	Typical temperature
Freezer compartment	Upper (top-mount)	Keeps food frozen, supports ice making	0°F
Fresh food compartment	Lower	Keeps food cold (not frozen)	37°F

Why it matters

Knowing the correct name helps when you are ordering Kenmore refrigerator parts, reading troubleshooting steps, or following airflow and temperature guidance. On this style of refrigerator, proper airflow between the freezer and refrigerator sections is critical for steady cooling performance.

Last updated: February 2026

Most Kenmore refrigerators last 12 to 15 years. With steady upkeep (especially cleaning and airflow), many top-mount models like Kenmore 10672153111 reach the high end of that range or longer; use the 10672153111 owner's manual for model-specific care steps.

Typical lifespan and what affects it

A refrigerator’s life is mostly driven by compressor run time, heat removal, and door sealing.

• Condenser cleanliness: dusty coils make the compressor work harder
• Door gasket condition: leaks cause longer run times and moisture issues
• Air circulation: blocked vents reduce cooling performance
• Room temperature and ventilation: hot garages and tight enclosures shorten life
• Ice maker and water system use: mineral buildup and valve wear add stress

Maintenance checklist that extends life

Follow the care guidance in the 10672153111 owner's manual, and use this schedule as a practical baseline.

Task	How often	Why it helps
Clean condenser area	Every 6 to 12 months	Reduces compressor load
Check door seal for gaps	Every 3 months	Prevents warm air leaks
Keep vents clear (fridge and freezer)	Ongoing	Maintains proper airflow
Level the refrigerator	Once, then as needed	Helps doors close fully
Replace failed cooling airflow parts promptly	As needed	Prevents warm temps and overwork

When a repair is worth it (quick guide)

Use this rule of thumb when deciding between repair and replacement.

• Worth repairing: cooling is inconsistent due to airflow issues (common), minor leaks, or ice maker problems
• Consider replacement: sealed-system failures or repeated major repairs near the 12 to 15 year mark

Common parts tied to cooling performance

If your refrigerator is warm or noisy, these model-matched parts are often involved:

• Refrigerator evaporator fan motor WP2315539 (moves cold air through the compartments)
• Refrigerator compressor W10233960 (drives the sealed cooling system)

Why it matters

A refrigerator that runs longer than necessary uses more energy and wears out key components faster. Simple maintenance and quick fixes to airflow or sealing problems can add years of reliable service.

Last updated: February 2026

The exact exterior dimensions for Kenmore refrigerator model 10672153111 depend on the specific configuration (hinges, handles, and door style). For the most accurate height, width, and depth for your unit, use the dimension/installation section in the 10672153111 owner's manual.

How to get the right measurements (the ones that matter)

Measure your refrigerator in these spots so it matches how it will sit in your kitchen:

• Height: floor to top of cabinet, then floor to top of hinge cover
• Width: cabinet width, then widest point with doors/handles
• Depth: cabinet only, then to the front of the handle
• Door swing clearance: space needed for doors to open past nearby walls
• Back clearance: room for airflow and (if equipped) the ice maker water line

Installation clearances (from the manual)

The manual for this Kenmore top-mount refrigerator calls for these minimum clearances:

• 1/2 in. on each side and at the top
• 1 in. behind the refrigerator
• Extra space behind if you have an ice maker (for the water line connection)
• At least 2 in. on the hinge side when next to a fixed wall (for door swing)

Clearance summary

Location	Minimum clearance
Sides and top	1/2 in.
Back	1 in.
Hinge side at wall	2 in.

Why it matters

Using the correct dimensions and clearances prevents fit problems, protects airflow across the condenser and evaporator system, and helps the refrigerator maintain stable temperatures without excessive compressor run time.

Last updated: February 2026