Kenmore 25360119410 refrigerator Parts

Your Kenmore top-mount refrigerator model 25360119410 has its exact capacity (cubic feet) listed on the serial/rating plate inside the fresh food compartment; that label is the most accurate way to confirm cubic feet for your specific unit. We also show model identification details in the 25360119410 owner's manual.

Look for the serial plate inside the refrigerator compartment (fresh food section). The Use and Care Guide notes that the model and serial information is found on the serial plate located inside the refrigerator compartment.

• Open the refrigerator door and look along the side wall near the crisper area
• Check the upper interior side walls near the light housing
• Look near the ceiling of the fresh food compartment on some versions
• Write down the model and serial number while you are there (helpful for parts matching)

For Kenmore 253-series refrigerators, the model number identifies the product family and configuration, but it does not reliably encode the exact cubic feet in a way that is consistent across all versions. The rating plate is the correct source for capacity.

Cubic feet affects how you shop for storage accessories and how you compare replacement options. It also helps when you are troubleshooting temperature performance, because a fully loaded top-mount refrigerator can behave differently than a lightly loaded one.

Proper leveling helps doors close and seal correctly, which protects cooling performance and usable space. The installation guide explains leveling guidance (cabinet level front to rear and slight tilt for door sealing).

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore refrigerators, including model 25360119410; you can match parts by model number and then choose the exact component you need (for example, door bins, gaskets, fan motors, or an ice maker) using the parts list and diagrams.

• Confirm the full model number on the serial tag and match it exactly to 25360119410.
• Use the parts diagrams to identify the correct location and description.
• Match by part name and part ID to avoid ordering a look-alike.
• If you are replacing a sealing part, verify color and door location (fresh food vs. freezer).
• For installation clearances and handling guidance, use the installation guide.

Using the correct Kenmore 25360119410 part helps restore proper cooling, airflow, and door sealing. A mismatched bin, gasket, or fan component can cause fit issues, temperature swings, frost buildup, or extra compressor run time.

Start with the parts list for model 25360119410; if you are shopping across multiple Kenmore models, search by model number on Sears PartsDirect to narrow to the exact fit.

Last updated: February 2026

Your Kenmore refrigerator’s model number is printed on the serial plate inside the fresh food (refrigerator) compartment. For Kenmore model 25360119410, the Use and Care Guide notes the serial plate is located inside the refrigerator compartment; record the model and serial number for future parts and service needs (see the 25360119410 owner's manual).

• Inside the refrigerator compartment on a serial plate (most common)
• On an inside wall near the crisper area (often visible when drawers are removed)
• Along the door frame area inside the fresh food section
• Behind the toe grille or near the lower front area (some installations reference removing the toe grille for access)

Kenmore model numbers are typically a string of numbers; for this unit, it is 25360119410. Write down both the model and serial number exactly as shown.

Using the exact model number prevents ordering the wrong door bins, gaskets, or cooling parts. Once you have the model number, you can match common replacements such as a door bin or fan motor to the correct diagrams and listings.

• Door storage parts (example: frigidaire refrigerator door bin 240337901)
• Door sealing parts (example: frigidaire refrigerator door gasket (white) 242193213)
• Cooling airflow parts (example: refrigerator evaporator motor 242077705)

After you confirm the model number from the serial plate, order from the parts list for 25360119410, or search by model on Sears PartsDirect if you are comparing multiple Kenmore models in your home.

Last updated: February 2026

Kenmore model numbers are read left to right; the first three digits identify the manufacturer family (for example, 253 is a common prefix on Kenmore top-mount refrigerators), and the remaining digits narrow down the exact design and feature set. For Kenmore model 25360119410, the full model number is what we use to match the correct parts and documentation in the owner's manual.

On Kenmore top-mount refrigerators like model 25360119410, the serial plate is located inside the refrigerator compartment.

• Open the fresh food door and look along the interior side walls
• Check near the crisper area or upper interior liner
• Write down the full model number and serial number exactly as shown
• Use only soap and water to clean the serial plate so the printing stays readable

Kenmore model numbers typically follow a pattern that helps identify the product family and the exact variation.

Small suffix changes can affect fit and function, especially on items that mount to the cabinet or door.

• Door bins and gallon bins
• Door gaskets (fresh food and freezer)
• Shelves and drawer covers
• Electronic control board and housing
• Ice maker options

If you are ordering parts, match using the complete model number 25360119410 from the serial plate, then shop the parts list for this model or search by model on Sears PartsDirect.

These are common part types where the exact model variation matters:

• Frigidaire refrigerator door bin 240337901 (door storage fit)
• Frigidaire refrigerator door gasket (white) 242193213 (seal and door alignment)
• Refrigerator ice maker IM116000 (option compatibility)

Reading the model number correctly prevents wrong-part returns and helps troubleshooting go faster because the correct Kenmore documentation and compatible refrigerator parts are tied to the exact model.

Last updated: February 2026

Most Kenmore refrigerators average 12 to 15 years of service life with normal household use. For Kenmore model 25360119410, consistent maintenance (clean airflow, tight door seals, correct temperatures) is what most directly determines whether it lands closer to 10 years or pushes past 15; see the owner's manual for model-specific care guidance.

• 10 to 12 years: heavier use, dusty environments, poor ventilation, infrequent cleaning
• 12 to 15 years: typical household use with basic maintenance
• 15 to 20 years: excellent maintenance, stable room temperatures, quick repairs when symptoms start

• Keep condenser area clean and unobstructed so the compressor runs cooler
• Make sure doors close fully and gaskets seal all the way around
• Set and maintain safe temps (about 37°F fresh food, 0°F freezer)
• Avoid overpacking; blocked vents cause warm spots and longer run times
• Address unusual noises early (fan blade rubbing, fan motor wear)
• Replace worn door bins and shelves so doors close properly and don’t sag

When these parts start failing, the refrigerator often runs longer, warms up, or gets noisy. Replacing the right part early can prevent bigger failures.

A refrigerator that is struggling to cool (dirty airflow path, leaking gasket, failing fan) runs longer and hotter. That extra runtime accelerates wear on the sealed system and compressor, which is the most expensive area to repair.

• Cooling is inconsistent even after cleaning and basic checks
• Food spoils faster or temperatures swing widely
• Multiple major components fail close together (fan plus control plus sealed-system symptoms)

For replacement parts specific to Kenmore 25360119410, order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026