Kenmore Elite 66513963K011 undercounter dishwasher Parts

Yes. Kenmore dishwashers are generally designed to run quietly, and your Kenmore Elite 66513963K011 is built as a premium undercounter dishwasher where low operating noise is a common feature. For the best real-world quietness, correct installation and a stable, level fit matter as much as the motor and wash system; see the installation guide.

Dishwasher noise is usually described in dBA (decibels). Lower numbers are quieter.

We see noise complaints most often when the dishwasher is not secured, not level, or has a restriction in the drain path.

• Make sure the dishwasher is firmly mounted to the cabinet or countertop brackets.
• Confirm the unit is level front-to-back and side-to-side so the wash system runs smoothly.
• Route the drain hose so it does not kink or rub against the motor area.
• If connected to a disposer, confirm the disposer inlet knockout plug is removed.
• Clean the filter regularly to prevent grinding and strain; consider the dishwasher filter W10872845 if yours is damaged.

A dishwasher that runs quietly is usually running efficiently. Excess noise often points to installation issues, drain restrictions, or a filter/sump problem that can lead to poor cleaning or draining.

Last updated: January 2026

On Kenmore Elite dishwasher model 66513963K011, we clean the ULTRA WASH filters by removing the upper filter (turn it 1/4 turn counterclockwise and lift out), then lifting and pulling the lower filter forward; rinse both under running water until soils are removed. Use only a soft brush if needed.

• Turn the upper filter assembly 1/4 turn counterclockwise; lift it out.
• Grasp the lower filter in the circular opening; lift slightly and pull forward to remove.
• Rinse filters under running water until most soils are removed.
• For stuck-on soils or calcium from hard water, use a soft brush (no wire brush or scouring pad).
• Reinstall the lower filter under the locating tabs; align the round openings.
• Insert the upper filter into the lower filter; rotate clockwise until it drops and locks.

For diagrams and the exact filter lock-in details for this model, use the 66513963K011 owner's manual.

If you have hard water (above about 15 grains), clean the filters at least once per month. White residue inside the tub is a common sign of hard water buildup.

A clogged filter restricts water flow and recirculation, which can cause poor cleaning, cloudy glassware, and drainage issues. Running the dishwasher without the filters properly installed can also lead to performance problems.

Last updated: January 2026

The model number and serial number label on Kenmore Elite model 66513963K011 is located on the dishwasher itself; you will typically see it on the tub frame area when you open the door. Use that exact model number to match diagrams and order the correct parts.

Check these common label locations first (open the door and use a flashlight if needed):

• Along the tub frame at the top edge of the opening
• On the left or right side of the inner door frame
• Around the door jamb area near the latch
• Near the front edge of the tub opening (not on the outer decorative panel)

The 66513963K011 owner's manual shows the dishwasher parts and features and calls out the “model and serial number label.”

Model numbers can look similar across Kenmore Elite dishwashers, so we recommend copying it exactly as printed.

• Write down the full model number and serial number
• Take a clear photo of the label for reference
• Use only the model number (not the serial) when searching parts
• Match every character, including any letters and suffixes

Using the exact model number ensures the parts list and diagrams match your specific build; that prevents ordering a door latch, rack adjuster, or pump that looks right but does not fit.

Last updated: March 2026