Kenmore Elite 79046629504 dual-fuel range Parts

For the Kenmore Elite 79046629504 range, the most reliable “reset” is a power reset: turn the range’s breaker OFF for 1 to 5 minutes, then turn it back ON and set the clock. If the control is locked, turn off the lockout so the oven can operate normally (see the 79046629504 owner's manual).

• Blank display or frozen keypad: power reset at the breaker (OFF 1 to 5 minutes).
• Display shows “LOC” or door won’t open: cancel Oven Lockout (press and hold the lockout pad for 3 seconds).
• Oven heats but temperature seems off: use the oven temperature adjustment feature (calibration).
• After a timed cooking cycle: return all controls to OFF.

The Oven Lockout feature prevents the oven from being turned on and can lock the door. To restore normal operation:

• Press and hold the Oven Lockout pad for 3 seconds.
• Wait for the door to fully unlock and for “LOC” to clear.

A reset clears a temporary control glitch, but it also helps you separate a simple lockout or power interruption from a real failure such as a bad oven temperature sensor. If the oven repeatedly overheats or underheats after resets, the frigidaire range oven temperature sensor 316217002 is a common part to test.

Last updated: January 2026

On the Kenmore Elite dual-fuel range model 79046629504, the model and serial number plate is typically on the oven front frame behind the oven door; on some versions it can be on the drawer side frame. Use the exact model number when ordering parts or scheduling service. See the 79046629504 owner's manual for the serial plate illustration and details.

• Turn the range OFF and let it cool.
• Open the oven door fully.
• Look along the front frame (the metal frame around the oven opening), usually near the left or right side.
• If you do not see it, pull out the bottom drawer and check the drawer side frame.
• Write down both the model and serial numbers (and any lot number/letter shown).

The serial plate is more than an ID tag; it can include key information used for correct parts and setup.

• Match the full model number exactly: 79046629504.
• Use the model number first, then confirm the part by name and diagram location.
• If you are troubleshooting baking temperature issues, the frigidaire range oven temperature sensor 316217002 is a common part associated with oven temperature regulation on ranges like this.

Kenmore Elite ranges often have multiple versions that look similar. Using the correct model and serial information prevents ordering the wrong control panel, oven sensor, igniter, or gasket.

Last updated: January 2026

On the Kenmore Elite 79046629504 dual-fuel range, the oven door typically unlocks automatically after a Self-Clean cycle once the oven cools down. If the door is still locked, cancel the cycle, let the oven cool completely, and avoid forcing the door because that can damage the door lock system.

• Press CANCEL/OFF to stop any active Self-Clean or timed cycle.
• Wait for the oven to cool fully; the lock releases only after temperatures drop.
• Check the display for a LOCKED indicator; it should turn off when the latch retracts.
• Gently try the handle again after cooling; do not pull hard.
• If the door remains locked after cooling, cycle power at the breaker for 1 minute, then restore power.

During Self-Clean, the range uses an automatic door locking system and the door can stay locked until the oven is safe. Forcing it can damage the latch or lock motor.

Common causes

If you suspect a failed lock mechanism on this model, the door lock motor/assembly is commonly serviced as a unit (example part listing: motor 318261230).

A locked door is a safety feature designed to prevent burns during high-heat cleaning. Waiting for cool-down and avoiding force protects the latch, hinges, and control system from expensive damage.

Use the 79046629504 owner's manual for the model-specific Self-Clean and door lock behavior, including what the display shows during lock and unlock.

Last updated: January 2026