Kenmore 11020372711 washer Parts

Yes. We can still get replacement parts for Kenmore appliances, including the Kenmore washer model 11020372711, by matching the exact model number to the correct diagrams and OEM parts list. Many Kenmore washers share components with major manufacturers, so parts support remains strong.

How to find the right part fast

Use the model number 11020372711 and confirm the part by name and location in the diagrams.

• Match the full model number from the rating label to avoid look-alike parts
• Use the parts diagram to confirm where the part installs
• Compare the part description (for example, lid lock vs. lid hinge)
• Check symptoms first so you replace the correct component
• Verify installation notes and specs in the 11020372711 owner's manual

Common Kenmore washer parts that are still available

For this model, these are examples of commonly replaced parts we stock:

• Washer lid lock assembly W10810403
• Washer drain pump W10876600
• Washer water valve W11220230
• Clutch assembly W10754448
• Damper assembly W11130359

Quick symptom-to-part guide

Symptom	Often related to	Example part for 11020372711
Won’t start or lid won’t lock	Lid lock system	Washer lid lock assembly
Won’t drain	Drain pump or drain hose restriction	Washer drain pump
Won’t fill or fills slowly	Water inlet valve or supply issue	Washer water valve
Loud during spin, poor spin	Suspension or drive components	Damper assembly or clutch assembly

Why it matters

Kenmore model numbers identify the exact platform and revision. That matters because even small changes (controls, lid lock style, drive system) can affect fit and wiring, especially on high-efficiency top-load washers designed for HE detergent.

Last updated: February 2026

The Kenmore washer model 11020372711 is typically about 3.2 cubic feet of capacity for this 110-series, top-loading high-efficiency, low-water design. For the exact rated capacity for your specific unit, check the specifications section in the 11020372711 owner's manual.

How to confirm capacity on your exact washer

We recommend verifying capacity using the model’s published specs (not the tub size you can see), since HE low-water washers can look smaller or larger than their rated volume.

• Look for “Capacity” or “cu. ft.” in the specifications section
• Match the model number on the rating label to 11020372711
• Use the manual’s cycle and loading guidance to avoid overfilling
• If you compare models, compare rated capacity and cycle type (HE low-water)

Typical capacity range for similar Kenmore top-load HE washers

If you are comparing baskets or planning laundry loads, most washers in this family land in a narrow range.

Washer type	Typical capacity range	What you’ll notice in use
Top-load HE low-water (like 11020372711)	3.0 to 3.6 cu. ft.	Smaller water level, higher efficiency
Traditional deep-fill top-load	3.5 to 4.5 cu. ft.	Higher water level, different wash action

Why it matters

Capacity affects how much you can wash per load, how well items circulate, and how reliably the washer spins out water. Overloading can also increase vibration and strain on suspension components.

If you are troubleshooting off-balance or shaking issues, common related parts for this model include the damper assembly W11130359 and spring support W10734521.

Last updated: February 2026

To identify your Kenmore washer model, we look for the model/serial label on the washer cabinet. On Kenmore model 11020372711, the label is typically on the back of the control panel, under the lid area, or on the cabinet near the bottom edge; front-load models often place it in the door opening.

Where to look first (fastest checks)

• Back of the control panel (rear panel area behind the knobs/buttons)
• Under the lid along the top rim of the cabinet opening
• Left or right side of the cabinet near the bottom front edge
• Rear of the washer cabinet (back panel)
• For front-load washers: door jamb or just inside the door opening

What the model number looks like

Kenmore washer model numbers are usually all numbers and often start with 110 (like 11020372711). Write it down exactly as shown.

What to record	Example	Why we need it
Model number	11020372711	Ensures diagrams and parts match your exact washer
Serial number	(varies)	Helps confirm production run and compatible revisions
Type	Top-load or front-load	Changes where the label is located and which parts fit

Why it matters

We use the model number to match the correct parts and repair instructions. Even small model-number differences can change key components like the lid lock, drain pump, or drive system.

Next step after you find it

• Confirm the number matches your paperwork and label exactly
• Use the model number to pull the correct diagrams in the 11020372711 owner's manual
• If you are troubleshooting a no-start or lid issue, compare symptoms to the lid lock system (common replacement is the washer lid lock assembly W10810403)

Last updated: February 2026

To reset your Kenmore top-load washer model 11020372711, disconnect power for 5 minutes to fully power down the controls, then restore power and start a cycle. If an F-type error code returns, clear it with START/PAUSE/UNLOCK LID and retry.

Quick reset steps (power reset)

• Press START/PAUSE/UNLOCK LID once to pause (if the washer is running).
• Unplug the washer (or switch the breaker off).
• Wait 5 minutes.
• Plug back in (or turn the breaker on).
• Select a cycle and touch and hold START/PAUSE/UNLOCK LID for up to 3 seconds to start.

If you are resetting because of an error code

Many display codes clear with a simple stop and restart:

• Touch START/PAUSE/UNLOCK LID once to clear the code.
• Touch and hold START/PAUSE/UNLOCK LID again (up to 3 seconds) to restart.
• If the code comes back right away, focus on the likely cause (lid, drain, or water supply).

Common reset-related checks

Symptom after reset	What to check first	What it affects
Won’t start, lid won’t lock	Load item blocking lid, lid latch	Safety interlock
Won’t drain, stops mid-cycle	Kinked drain hose, slow drain	Spin and cycle completion
Won’t fill or fills slowly	Both faucets on, inlet hoses	Water level and wash action

Why it matters

A 5-minute power reset clears temporary control glitches and forces the washer’s control to reinitialize. If the same fault returns immediately, the washer is usually reacting to a real condition (like a lid lock issue or draining problem), not just a “stuck” control.

For model-specific button behavior, cycle selection, and display messages, follow the 11020372711 owner's manual.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable operation for less than the cost of replacing the machine. For Kenmore model 11020372711, we typically recommend repair first for common wear items (lid lock, drain pump, suspension) and replace only when major drive or control costs stack up.

Quick way to decide (repair vs. replace)

Use these checkpoints before you spend money on parts or labor:

• Get a clear symptom: no drain, no spin, won’t start, loud banging, or error code.
• Rule out setup issues: drain hose height and clogs can mimic a “bad pump” problem (the drain hose end should not be too high; many installs cap around 96 inches). See the 11020372711 owner's manual.
• Price the likely fix: compare the part cost plus labor to a new washer.
• Consider age and condition: rusted cabinet, leaking outer tub, or repeated failures push toward replacement.
• Start with the most common failures: lid lock, pump, and suspension components.

Common repairs that are usually worth it on this model

These are frequent, targeted fixes that often restore normal washing and spinning:

• Lid won’t lock or cycle won’t start: washer lid lock assembly W10810403
• Won’t drain or drains slowly: washer drain pump W10876600
• Excessive shaking or “walking”: damper/suspension issues (often paired with leveling)
• Poor agitation or unusual drive noises: clutch or drive components

Typical cost-to-benefit comparison

Situation	What it usually means	Typical recommendation
Single failed wear part (lock, pump, hose)	Isolated failure	Repair is usually the best value
Repeated out-of-balance, loud banging	Suspension/damper wear, leveling, load habits	Repair plus setup checks
Multiple major parts needed (drive + control)	Higher total cost	Compare total to replacement

Why it matters

A correct diagnosis prevents “parts swapping.” On a top-loading high efficiency, low-water washer like the 11020372711, installation details (especially draining) and a few high-wear parts can make the difference between a simple repair and an expensive misdiagnosis.

Last updated: February 2026

Kenmore 11020372711 is a Kenmore-branded washer. Kenmore is the brand name shown on the appliance and in the documentation for this model; you will use the Kenmore model number when looking up parts, manuals, and installation details.

How Kenmore branding affects parts and service

Even though Kenmore is the brand on the machine, many Kenmore washers are built by major manufacturers. For repairs, what matters most is matching parts to the exact model number.

• Always search parts by the full model number 11020372711
• Use the model manual for operating and care instructions
• Use the installation guide for hose routing, leveling, and hookup requirements
• Match replacement parts by part ID and description (not by appearance alone)

Where to confirm the model and brand on the washer

We recommend verifying the model/serial tag on the cabinet or lid area, then matching it to the documentation.

What to check	What it should show	Why it matters
Model/serial tag	11020372711	Ensures correct parts lookup
Use and care guide	Kenmore top-load washer info	Confirms brand and operating guidance
Installation instructions	Kenmore installation steps	Confirms hookup and leveling steps

Helpful documents for this model

For the most accurate identification and setup details, use the documentation for this exact washer:

• 11020372711 user manual
• 11020372711 installation guide

Why it matters

Kenmore model numbers like 11020372711 are the key to getting the right washer lid lock, drain pump, water valve, or drive components. Using the correct model number prevents ordering the wrong part and reduces repeat repairs.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11020372711, consistent maintenance (proper detergent, correct loading, and keeping the drain system clear) is what most directly determines whether you land closer to 10 years or 15.

Typical lifespan (what to expect)

Most Kenmore top-load washers like 11020372711 fall into this range:

Usage pattern	Typical lifespan	What usually shortens life
Light (few loads/week)	12 to 15 years	Long periods of non-use, corrosion
Average (4 to 7 loads/week)	10 to 13 years	Overloading, poor leveling
Heavy (daily loads)	8 to 12 years	Frequent overloads, repeated off-balance spins

What makes a washer wear out faster

We see these issues reduce washer life the most:

• Overloading the basket or packing items tightly
• Using non-HE detergent or too much detergent (this washer is designed for HE detergent)
• Running with an unbalanced load repeatedly (excess vibration)
• Poor draining (slow drain, clogs, or a drain hose installed too high)
• Skipping basic cleaning and inspection steps listed in the 11020372711 owner's manual

Signs it may be near end of life

If these symptoms become frequent, repairs can start stacking up:

• Loud grinding or repeated spin problems (often drive or clutch related)
• Persistent leaking from the tub area
• Repeated no-drain or slow-drain behavior
• Lid not locking reliably (cycle will not start or stops mid-cycle)
• Strong vibration even after leveling and load balancing

Repairs that commonly extend life

If the washer is otherwise in good shape, these are common “keep it going” repairs:

• Replace a failing lid lock: washer lid lock assembly W10810403
• Fix drain problems by checking the pump and hose routing: washer drain pump W10876600
• Address spin agitation issues tied to the drive system: clutch assembly W10754448

Why it matters

Knowing the 10 to 15 year lifespan helps you decide whether to repair or replace. If your 11020372711 is under about 10 years old, a targeted repair (lid lock, drain pump, clutch) often restores reliable operation and avoids the cost of a new washer.

Last updated: February 2026