KitchenAid KRFC300ESS11 bottom-mount refrigerator Parts

Yes. The KitchenAid KRFC300ESS11 bottom-mount refrigerator is designed to run efficiently when it is properly sealed, correctly leveled, and maintained (clean airflow paths, correct temperatures, and fresh filters). Keeping the doors sealing tightly has the biggest day-to-day impact on energy use.

What “energy efficient” means in real use

Even an efficient refrigerator can waste energy if it has air leaks, warm air infiltration, or restricted airflow.

• Set temperatures to typical targets: 37°F for fresh food and 0°F for freezer
• Keep the doors closed as much as possible (limit long door-open times)
• Avoid overpacking; leave space for air circulation
• Keep condenser and vents clear of dust and obstructions
• Replace worn door seals so cold air stays in

Quick checks that improve efficiency on KRFC300ESS11

Use these simple checks first because they often reduce run time immediately.

Check	What to look for	What to do next
Door seal “paper test”	Paper slides out easily	Clean the gasket and cabinet; replace gasket if it will not seal
Door alignment	Doors sit uneven or rub	Level the refrigerator and align doors
Frost or warm spots	Frost buildup, warm fridge section	Check evaporator fan operation and airflow
Interior light staying on	Light does not turn off when door closes	Test/replace the door switch

Parts that commonly affect energy use

If you find a sealing or airflow problem, these model-compatible parts are common fixes:

• Whirlpool refrigerator door gasket, right (gray) W10830162: helps prevent cold-air leaks at the right door
• Refrigerator door switch W11396033: turns the interior light off when the door closes (a stuck switch can add heat)
• Refrigerator evaporator motor W11024089: keeps cold air moving through the compartments

Why it matters

An efficient refrigerator saves energy by running fewer minutes per hour. Air leaks, a misaligned door, or a fan problem forces longer run times, which increases electric use and can also cause temperature swings that affect food quality.

Last updated: January 2026

For the KitchenAid KRFC300ESS11 bottom-mount refrigerator, the most common issues we see are cooling complaints (warm refrigerator or freezer), ice maker problems (slow or no ice), and door sealing problems that cause temperature swings and moisture. These symptoms often trace back to airflow, controls, or a leaking door gasket.

Most common symptoms and what they usually point to

• Warm refrigerator section: evaporator fan issue, frost buildup restricting airflow, or a control/sensor problem
• Warm freezer: airflow restriction, defrost problem, or sealed system/compressor concern
• Slow or no ice production: water supply issue, inlet valve issue, or ice maker assembly problem
• Moisture, frost, or condensation around doors: door not aligned, gasket not sealing, or frequent door openings
• Lights or door alarm acting up: door switch not closing consistently

Quick checks you can do first (no tools)

• Confirm the doors close fully and the refrigerator is level (a slight backward tilt helps doors self-close).
• Check for packages or bins preventing the doors from sealing.
• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Listen for the evaporator fan running when the compressor is on (a failed fan often causes warm temps).
• If ice is slow, verify the household shutoff valve is fully open and the water line is not kinked.

Parts that commonly solve these complaints on KRFC300ESS11

Symptom	Common part to inspect/replace	Example part for this model
Condensation or poor door seal	Door gasket	Whirlpool refrigerator door gasket, right (gray) W10830162
Lights/alarm issues when door closes	Door switch	Refrigerator door switch W11396033
Warm temps, weak airflow	Evaporator fan motor or blade	Refrigerator evaporator motor W11024089 / refrigerator evaporator fan blade WP2169142
No ice or intermittent ice	Complete ice maker	Assembly, icemaker (complete) W11692144
Random cooling or display/control issues	Electronic control board	Refrigerator electronic control board WPW10317076

Why it matters

A small airflow or door-seal problem can quickly turn into food spoilage, heavy frost buildup, and longer compressor run times. Catching the cause early usually keeps the repair simpler and helps the refrigerator hold steady temperatures.

Helpful DIY guidance

• Use how to fix your evaporator cooling fan when you suspect weak airflow or a noisy fan.
• Use common refrigerator ice maker problems and solutions if the ice maker is slow, hollow, or not cycling.
• Use how to fix a fridge door seal if you see condensation, frost at the door edges, or the door pops open.

Last updated: January 2026

Your KitchenAid bottom-mount refrigerator’s model number is printed on the appliance ID label; on most units like KRFC300ESS11, that label is inside the fresh food compartment along the side wall or near the ceiling. Match the full model number exactly before ordering parts.

Where to look on a KRFC300ESS11

Check these common label locations first:

• Inside the refrigerator section on the left or right side wall (often near the crisper area)
• On the ceiling of the fresh food compartment (near the light housing)
• Along the door frame when you open the refrigerator doors
• Behind the crisper drawers (on the liner wall)

What to write down (so parts fit)

For accurate parts lookup, record:

• Model number (example: KRFC300ESS11)
• Serial number (helps confirm production run)
• Any suffixes or extra digits shown on the label

Quick checklist

Label item	Why it matters
Model number	Ensures diagrams and parts match your exact refrigerator
Serial number	Helps confirm version changes within the same model
Brand	Confirms you are shopping KitchenAid-compatible parts

Why it matters

KitchenAid refrigerators can have small design changes across production runs; using the exact model number helps you get the correct door gasket, control board, icemaker, or bins the first time.

If you are still not seeing the label, use our guide: how to find your appliance model number (and what it means for parts).

Last updated: March 2026