Kenmore 10656164500 refrigerator Parts

On Kenmore side-by-side refrigerator model 10656164500, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. Use that label when ordering parts or looking up specifications in the owner's manual.

Where to look (fast checklist)

• Open the refrigerator (not the freezer) door.
• Look along the inside side wall of the fresh food compartment.
• Check near the upper side walls and around the crisper area if you do not see it immediately.
• The label typically lists model number, serial number, and sometimes the purchase date area.
• Write the model and serial down before you start any repair or parts search.

What you should see on the label

The label includes both identifiers; the model number is what we use to match parts diagrams and compatible replacements.

Item on label	What it’s used for	Example for this unit
Model number	Matching parts and manuals	10656164500
Serial number	Production details and service history	Varies by unit

Why it matters

Using the exact model number prevents ordering the wrong refrigerator water filter, ice maker, or door hardware. Even within Kenmore 106-series refrigerators, small design changes can affect fit and wiring.

Parts you may commonly match by model number

If you are locating the label to order parts, these are common items customers replace on this model:

• Genuine Kenmore refrigerator water filter EDR3RXD1 (filter and water quality)
• Refrigerator ice maker WPW10190961 (no ice or slow ice production)
• Refrigerator door cam (black) WP2182179 (door not closing smoothly)

To search beyond the parts shown for model 10656164500, use Sears PartsDirect and enter the full model number from the label.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10656164500 are no cooling or weak cooling, ice maker not making ice, water leaks, excess moisture, doors not sealing or closing, and unusual noises. Many of these trace back to airflow issues, dirty condenser coils, or defrost system trouble (ice buildup). See the 10656164500 owner's manual for model-specific troubleshooting steps.

Quick checks we recommend first

• Confirm the unit has power (outlet, breaker, controls not set to OFF).
• Make sure both doors close fully and the gaskets seal all the way around.
• Clean the condenser coils; dirty coils reduce heat transfer and can cause warm temps.
• Check that interior air vents are not blocked by food packages.
• If the refrigerator has digital controls, turn it OFF then ON to reset.
• For ice maker complaints, allow 24 hours after hookup for ice production to begin.

Common symptoms and the most likely causes

Symptom	Most common causes	What to do next
Not cooling well	Dirty condenser coils, blocked vents, defrost cycle/ice buildup	Clean coils, clear vents, check for frost buildup
Ice maker not producing	Freezer not cold enough, shutoff arm OFF, new install	Verify freezer temp, set arm to ON, wait 24 hours
Water leaks/puddles	Defrost drain issues, water line/valve problems	Inspect drain pan area, check tubing and valve
Moisture buildup	Doors opened often, humid room, blocked vents	Reduce door openings, clear vents, wrap food
Doors won’t close/seal	Sticky/dirty gaskets, leveling issues	Clean gaskets, level refrigerator

Parts that commonly relate to these problems

If troubleshooting points to a failed component, these are common replacements for this model:

• Water and ice issues: refrigerator inlet valve W10822681, refrigerator water tube 8201597, refrigerator ice maker WPW10190961
• Warm temps from airflow/defrost issues: refrigerator defrost bi-metal WPW10225581
• Water taste/flow complaints: genuine Kenmore refrigerator water filter EDR3RXD1 (replace on schedule and purge air from the line)

Why it matters

Cooling, ice production, and leak complaints usually share the same root causes: restricted airflow, poor heat removal at the condenser, or water supply problems. Fixing the underlying cause protects the compressor and helps temperatures stabilize faster.

For replacement parts for 10656164500, order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

You can find the model number for your Kenmore refrigerator on the model and serial number label inside the refrigerator compartment. On Kenmore model 10656164500, it is typically on an inside wall of the fresh food (refrigerator) section; use the owner's manual to confirm the exact label location for your unit.

Where to look first (fastest checks)

• Open the refrigerator (fresh food) door and scan the inside side walls
• Check near the crisper drawer area (label is often above or beside the lower bins)
• Look for a sticker or plate that lists model and serial
• Use a flashlight; labels can be low-contrast or partially hidden by shelves
• Write the model and serial down exactly as shown (letters and numbers)

What the label usually includes

Item on the label	Why you need it
Model number	Ensures you get the correct Kenmore 106 parts and diagrams
Serial number	Helps match production details when troubleshooting
Purchase date (sometimes recorded by owner)	Useful for maintenance history and records

Why it matters

The model number is the key to ordering the right refrigerator parts and using the correct troubleshooting steps. Even small model-number differences can change which water filter, ice maker, or door parts fit.

Tip for parts and maintenance

If you are also tracking filter replacements, your manual lists the replacement filter as part #9020; on this model, a matching option is the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: February 2026

For Kenmore model 10656164500, the most accurate way to get cubic feet is to use the capacity listed in the specifications section of the owner's manual. If you cannot find it there quickly, you can also confirm capacity from the model and serial label inside the fresh food compartment.

How to find the cubic feet on your exact refrigerator

Use these checks in order; they work even if the refrigerator has been moved or parts have been replaced:

• Look in the specifications section of the owner's manual for “capacity” or “total capacity.”
• Check the model and serial number label on the inside wall of the refrigerator compartment; it often lists key specs.
• If you are estimating, measure the usable interior (not the outside cabinet) and calculate volume.
• If you are comparing models, use the model number (10656164500) to match the correct spec sheet and parts list.

Quick capacity estimate (when you need a ballpark)

If you need an estimate before you locate the spec, we use this interior-measurement method:

1. Measure interior width, height, and depth in inches.
2. Multiply: W x H x D to get cubic inches.
3. Divide by 1,728 to convert to cubic feet.

What you measure	Use this tip	Why it helps
Fresh food section	Measure shelf-to-shelf usable space	Avoids counting insulation and ducts
Freezer section	Measure around baskets and rails	Prevents overestimating
Total capacity	Add both results	Matches how capacity is typically stated

Why it matters

Cubic feet affects how much food you can store, but it also impacts setup and maintenance decisions such as airflow clearance, shelf and bin fit, and choosing the correct accessories like a refrigerator water filter.

Related parts and resources

• If you are also checking filter fit for this model, the replacement water filter commonly used is genuine Kenmore refrigerator water filter EDR3RXD1.
• For broader part lookups by model number, we list parts for 10656164500 on the model parts list, and you can also search by model on Sears PartsDirect.

Last updated: February 2026

To replace the ice maker in your Kenmore 10656164500 side-by-side refrigerator, we turn off power and the water supply, remove the ice bin, disconnect the ice maker wiring, swap the assembly, then restore power and water and turn the ice maker back on. Use the 10656164500 owner's manual for the exact ON/OFF switch location and bin removal details.

Before you start

• Unplug the refrigerator or switch off the breaker.
• Shut off the household water supply to the refrigerator.
• Empty the ice bin; melt stuck ice with warm water (never use anything sharp).
• Use a towel to protect the freezer floor and catch screws.
• Have a nut driver or screwdriver ready.

Replacement steps (typical for this style)

1. Remove the ice storage bin: press the release button and lift the bin up and out.
2. Turn the ice maker off: slide the freezer ice maker switch to OFF (right).
3. Remove the ice maker: take out mounting screws, unplug the wiring harness, and free the fill tube if your design uses one.
4. Install the new unit: reconnect the harness firmly, mount the ice maker, and reinstall screws.
5. Reinstall the bin, restore water and power, then slide the switch to ON (left).

What to expect after installation

Timing	What’s normal
First ice	About 24 hours
Full bin	Up to 3 days

If it still will not make ice

• Confirm the switch is ON (left).
• Make sure the bin is fully seated; many models stop ice production when the bin is removed.
• Check for a kinked water line or closed shutoff valve.
• If water flow to the ice maker is weak, the refrigerator inlet valve W10822681 is a common fix.

Why it matters

Most “no ice” problems after a replacement come from the ice maker being left OFF, a loose harness connection, or restricted water flow, not the new ice maker itself.

You can order model-matched parts from the parts list for Kenmore 10656164500, or search by model number on Sears PartsDirect.

Last updated: February 2026