Samsung RS275ACPN/XAA-00 refrigerator Parts

On the Samsung RS275ACPN side-by-side refrigerator, the dispenser provides two ice selections: cubed or crushed, plus an ice off setting. This model does not offer four ice shapes; “four types of ice” is a feature found on some newer Samsung refrigerator lines, not this unit (see the RS275ACPN owner's manual).

What this model’s ice options mean

• Cubed: the ice maker drops cubes into the bucket; dispensing in “Cubed” sends cubes out.
• Crushed: cubes are made the same way, then crushed at the dispenser when you select “Crushed.”
• Ice off: stops ice production (helpful for vacations or when servicing the ice system).

How to select cubed, crushed, or ice off

Use the Ice Type button on the control panel to cycle through the available modes.

• Press Ice Type until the display shows the option you want
• Dispense ice by pushing the dispenser lever with a cup
• Keep the cup centered to reduce splashing and ice “jumping”
• Never put fingers or objects into the dispenser opening

Quick comparison

Feature	RS275ACPN (this model)	“Four types of ice” Samsung models
Ice shapes available	Cubed, crushed	Varies by model; may include specialty shapes
How crushed ice is made	Cubes are crushed during dispensing	May include dedicated specialty ice systems
Typical location	Door dispenser	Often internal plus door dispenser

Why it matters

Knowing the correct ice options helps you troubleshoot the right system. If you are not getting cubed or crushed ice on RS275ACPN, the issue is usually water supply, freezing in the ice path, or an ice maker/dispenser component such as the refrigerator ice maker assembly DA97-02203G or refrigerator ice dispenser solenoid DA74-40151G.

Last updated: February 2026

For the Samsung RS275ACPN side-by-side refrigerator, the most common downsides are ice and water dispenser problems, temperature inconsistency that can affect food quality, and higher repair complexity when sealed-system cooling components or airflow parts fail. Use the RS275ACPN owner's manual to confirm operating features and basic checks.

Common downsides owners notice

• Ice maker and dispenser issues (slow production, clumping, jams in the chute)
• Water dispenser problems (no water, weak flow, or intermittent dispensing)
• Cooling complaints (warm refrigerator section, freezer too warm, or uneven temps)
• More involved repairs when the compressor or defrost system is the root cause
• Door sealing quirks that can show up as frost, moisture, or temperature swings

What to check first on RS275ACPN (quick troubleshooting)

We recommend starting with the same basics the manual points to for getting the refrigerator fully operational: verify power, allow time to reach temperature, and confirm the unit is installed with proper clearance and leveling.

• Confirm the temperature settings are not set too warm (or so cold that the water tank freezes)
• Make sure the doors close and seal completely; this model uses a door-closing feature to help seal
• If no water is supplied, verify the water line is connected, the shut-off valve is open, and the supply line is not crushed
• If the dispenser is not working, confirm a water filter is installed; this design blocks water flow without a filter cartridge
• If cooling is noisy or inconsistent, check for airflow restrictions and heavy frost buildup

Parts that often relate to these symptoms

If troubleshooting points to a failed component, these model-matched parts are commonly involved:

Symptom	Likely system	Example model-matched part
Warm temps or erratic temps	Temperature sensing / control	Refrigerator temperature sensor DA32-10109W
Poor cooling, overheating, loud running	Condenser airflow	Refrigerator condenser fan DA31-00146B
No water or weak water at dispenser	Water supply control	Kenmore pro refrigerator water inlet valve DA62-00914B
Frost buildup, warming, defrost issues	Defrost system	Refrigerator evaporator defrost heater DA47-00246F

Why it matters

Ice, water, and temperature problems are not just convenience issues; they directly affect food safety, energy use, and the risk of secondary damage (like frost buildup restricting airflow). Catching a door-seal, airflow, or water-supply issue early prevents bigger repairs.

Last updated: February 2026

Your Samsung RS275ACPN model number and serial number are printed on a label inside the refrigerator cabinet; you will find it on the left-hand side wall. Write both numbers down exactly as shown so you can match parts and diagrams correctly.

Where to look (fastest method)

• Open the fresh food (refrigerator) door.
• Look along the left interior side wall of the cabinet.
• Find the rating label with “Model #” and “Serial #”.
• Copy the model number and serial number exactly (including any slashes or suffixes if shown).
• Use that full model identification when ordering parts like a door gasket, temperature sensor, or ice maker.

What the label typically shows

Label field	What it’s used for	Why you need it
Model #	Identifies the exact refrigerator version	Ensures correct fit for parts and diagrams
Serial #	Identifies your specific unit	Helps confirm production details when troubleshooting

Why it matters

Samsung side-by-side refrigerators can look similar across model families (RS275, RS277, and others), but parts such as the ice maker assembly, door gasket, or control components can vary by version. Using the exact model from the cabinet label prevents ordering the wrong part.

Helpful reference

For the exact wording and label location description, use the RS275ACPN owner's manual.

Last updated: March 2026