Kenmore Elite 66514759N510 dishwasher Parts

Yes. We still offer replacement parts for the Kenmore Elite dishwasher model 66514759N510, including common wear items like rack hardware, pumps, valves, and latches; use your full model number to match the correct part and avoid fit issues. See the 66514759N510 installation guide for part and accessory references.

How to find the right part for your Kenmore 66514759N510

Use the model number first, then match by part name and identifier.

• Confirm the model number on the dishwasher’s rating label: 66514759N510
• Identify the symptom (won’t drain, won’t fill, door won’t latch, rack won’t roll)
• Match the part by part name and part ID (not just a look-alike)
• Compare your existing part’s markings to the listing when possible
• Use the diagrams and parts list for your model to avoid ordering the wrong revision

Common parts we stock for this model

These are frequent fixes for performance and usability problems:

• Rack height and wheel issues: dishwasher rack adjuster W10712395, dishwasher dishrack roller assembly, lower WPW10195417
• Drain problems: dishwasher drain pump WPW10531320, dishwasher drain hose 8269144A
• No fill or slow fill: dishwasher water inlet valve WPW10327249
• Door won’t close or start: dishwasher door latch WPW10653840
• Poor drying or water not heating: element assembly W10703867

Quick symptom-to-part checklist

Symptom	Most likely area	Example part for 66514759N510
Lower rack falls off track or won’t roll	Rack wheels, stops, adjusters	Dishwasher dishrack roller assembly, lower WPW10195417
Dishwasher won’t drain	Drain pump, drain hose, blockage	Dishwasher drain pump WPW10531320
Dishwasher won’t fill	Water inlet valve, supply line	Dishwasher water inlet valve WPW10327249
Door won’t latch, cycle won’t start	Door latch, strike alignment	Dishwasher door latch WPW10653840

Why it matters

Kenmore dishwashers are built with serviceable components, so replacing a targeted part (like a drain pump, inlet valve, or rack adjuster) often restores normal washing and drying without replacing the entire dishwasher.

Last updated: February 2026

Yes, repairing a Kenmore Elite dishwasher like model 66514759N510 is worth it when the problem is a common wear item (rack hardware, latch, drain hose) or a single failed component; it is usually not worth it when multiple major systems (pump, control, leaks) are failing at the same time.

Quick decision checklist

• If the dishwasher is under 10 years old, repairs usually make sense.
• If the issue is mechanical and isolated (rack rollers, adjusters, latch), repair it.
• If you have repeated draining or washing failures, diagnose first before buying parts.
• If the tub is leaking or badly rusted, replacement is often the better value.
• If you can DIY safely, the repair is typically far cheaper than replacement.

Common repairs that are usually worth it (66514759N510)

These are frequent, straightforward fixes on this style of Kenmore dishwasher:

• Upper rack not staying level or not adjusting: replace the dishwasher rack adjuster W10712395.
• Rack not rolling smoothly: replace the dishwasher dishrack roller assembly, lower WPW10195417.
• Door not latching or cycle will not start: replace the dishwasher door latch WPW10653840.
• Not draining well: inspect the drain path; if the pump is weak/noisy, consider the dishwasher drain pump WPW10531320.
• Poor drying or water not heating: test the heater circuit; replace the element assembly W10703867 if failed.

Cost vs. value guide

Repair type	Typical effort	Typical value outcome
Rack hardware (rollers/adjusters/stops)	Low	High (restores daily usability)
Door latch/door balance issues	Low to medium	High (prevents no-start and slamming)
Drain pump or inlet valve	Medium	Medium to high (fixes functional failure)
Control panel or major electronics	Medium to high	Medium (depends on age and overall condition)
Multiple major parts at once	High	Low (replacement often wins)

Why it matters

A dishwasher repair is “worth it” when it restores reliable washing and draining without stacking multiple expensive parts. Using the troubleshooting steps and maintenance guidance in the owner's manual helps you confirm the failure first, so you do not replace good parts.

Last updated: February 2026

You can find the model number for your Kenmore Elite dishwasher on the rating label located just inside the door opening; on model 66514759N510, it’s typically on the left side of the inner door frame area. Use that full model number when ordering parts or checking instructions in the 66514759N510 owner's manual.

Where to look (fast checklist)

• Open the dishwasher door fully.
• Look along the inner edge of the tub opening (the frame the door closes against).
• Check the left-hand side first (most common location).
• Look for a rating label with both the model and serial number.
• Wipe the area with a damp cloth if the label is hard to read.

What the label usually includes

Label item	What it’s used for	Example (what you’ll see)
Model number	Matching parts and diagrams	66514759N510
Serial number	Identifying production run	A longer letter/number code
Electrical ratings	Installation and safety checks	Volts/amps info

Why it matters

We use the exact model number to match the correct Kenmore dishwasher parts and revisions. Even small model-number differences can change fit for items like the door latch, rack hardware, or pump components.

Tip for ordering the right parts

• Copy the model number exactly as printed (including all digits).
• If you’re replacing rack hardware, match parts by model first, then by symptom. Common rack-related parts for this model include the dishwasher rack adjuster W10712395 and the dishwasher dishrack roller assembly, lower WPW10195417.

Last updated: February 2026