Whirlpool WRF560SEYB00 refrigerator Parts

For your Whirlpool WRF560SEYB00 bottom-mount refrigerator, do not remove the cardboard (or fiberboard) panel on the bottom or rear lower area. That panel is a protective cover and airflow guide for the condenser area; removing it can reduce cooling performance and expose components.

Keep the bottom or rear lower cover installed; remove only shipping materials that are clearly temporary.

• Keep installed: the flat cardboard or fiberboard panel attached with screws or clips (often under the unit or across the lower back)
• Remove: exterior tape, corner blocks, foam spacers, and plastic wrap used for shipping
• Remove: any cardboard placed loosely inside the fresh food or freezer compartments
• Remove: any packing holding shelves, bins, or the ice maker arm in place
• Keep installed: any metal or plastic service cover that protects wiring and the compressor area

Use these checks to confirm you are looking at a protective cover, not packaging.

That lower cover helps direct air across the condenser coils and protects the compressor area from dust, pets, and accidental contact. Keeping it in place helps your refrigerator cool efficiently and run more reliably.

We recommend checking the cabinet and rear access panel diagrams and any setup notes in the owner's manual.

Last updated: February 2026

A bottom-freezer refrigerator (like Whirlpool model WRF560SEYB00) is usually the better everyday choice because the fresh-food section sits at eye level, so you access the most-used items with less bending. A top-freezer design can be more efficient and simpler, but it is less convenient for daily use.

If you use the refrigerator section far more than the freezer (most households do), a bottom-freezer layout is the better fit.

• Keeps produce, drinks, and leftovers at a comfortable reach
• Reduces door-open time while you search for fresh-food items
• Works well for families that cook often and store lots of refrigerated food
• Pairs well with common convenience features (ice maker, water filter, air filter)

A top-freezer refrigerator can be the better pick when you want maximum simplicity.

• You want a typically lower purchase cost
• You prefer a simpler design with fewer features to maintain
• You use the freezer more often than the refrigerator
• You want a layout that is easy to place in tighter kitchens

The “better” freezer position is mostly about how you live day to day. Bottom-freezer models prioritize ergonomics and fresh-food access; top-freezer models prioritize simplicity and often strong efficiency.

For model-specific use and care details (including temperature settings and feature operation), follow the owner's manual.

Last updated: February 2026

Bottom-freezer refrigerators like the Whirlpool WRF560SEYB00 keep fresh food at eye level, but the tradeoff is more bending and heavier freezer access. They also tend to cost more than basic top-freezer models, and the freezer drawer hardware can wear faster if it is frequently overloaded.

• You have to bend or squat to reach frozen foods in the lower drawer.
• Freezer drawers can feel heavy when fully loaded (more strain on slides, rollers, and door alignment).
• Freezer organization can be harder; items stack and get buried without bins.
• Ice maker and water system issues can be more noticeable if you rely on them daily (clogs, air in lines, slow fill).
• Some kitchens have tighter clearance for pulling the freezer drawer fully open.

Use your WRF560SEYB00 owner's manual to confirm the correct loading, door closing, and temperature settings. These steps help prevent the most common bottom-freezer complaints:

• Keep heavier items low and centered in the freezer drawer to reduce rail wear.
• Make sure the doors seal evenly; poor sealing increases frost and makes drawers harder to open.
• Replace filters on schedule to keep dispenser flow strong and reduce ice maker problems.
• Level the refrigerator so the doors close smoothly and stay aligned.

If the “disadvantage” you are feeling is really a performance issue, these model-matched parts are often involved:

Most bottom-freezer “cons” come down to ergonomics and wear: frequent heavy drawer use, door sealing, and water filtration. Keeping seals tight and filters fresh helps your Whirlpool refrigerator run colder, waste less energy, and avoid nuisance issues.

Last updated: February 2026