Kenmore 58714432200 dishwasher Parts

Yes. We still see replacement parts available for many Kenmore dishwashers, including model 58714432200. The key is matching parts by your exact model number and the part description; the model number is typically on the serial plate on the tub wall just inside the door (see the 58714432200 owner's manual).

How to make sure you order the right part

Use the model number first, then confirm the part name and where it installs.

• Find the model number on the tub wall just inside the dishwasher door.
• Identify the symptom (won’t drain, won’t fill, door won’t latch, leaking).
• Match the part by part description and part number, not by looks alone.
• Compare your old part to the replacement (ports, mounting points, electrical terminals).
• If your dishwasher is portable/convertible, avoid using the portable water supply hose for a permanent install.

Common Kenmore 58714432200 parts customers replace

These are examples of parts we commonly see replaced on this model.

Problem you notice	Likely part to check	Example part for this model
Dishwasher won’t drain or drains slowly	Drain path and drain hose	Hose 807117001
Dishwasher won’t fill or fills slowly	Water inlet valve	Water valve 154637401
Overfilling or fill issues tied to float	Float switch	Switch 154773201
Rack won’t roll smoothly	Rack wheels/rollers	Dishwasher wheel 5304532229

Why it matters

Ordering by the exact model number (58714432200) prevents wrong-fit parts, repeat leaks, and no-start issues caused by mismatched door latch or water inlet components. It also speeds up troubleshooting because you can focus on the most likely failure points first.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher is usually worth it when the issue is a common wear item (like a drain hose, water inlet valve, or door latch parts) and the tub is sound; for a Kenmore 58714432200, many repairs are straightforward and cost less than replacement. Use the 58714432200 owner's manual to match symptoms to the right fix.

Quick way to decide (cost, age, and what failed)

We use these rules of thumb for dishwashers:

• Under 8 years old: repair is typically the best value.
• 8 to 12 years old: repair is worth it for leaks, fill, drain, or door-latch issues; avoid stacking multiple major repairs.
• Over 12 years old: repair only if it is a single, clear failure and the dishwasher is otherwise reliable.
• Repair cost target: if the repair is under about 50% of replacement cost, repair usually wins.
• Tub and inner door panel condition matters most: cracks or heavy corrosion push the decision toward replacement.

Common repairs that are usually “worth it” on model 58714432200

These are frequent, fixable problems that often come down to one part:

• Not draining or slow drain: check the hose 807117001 routing and clogs
• Not filling or fills slowly: suspect the water valve 154637401
• Overfilling or won’t stop filling: inspect the float and switch 154773201
• Door won’t latch or won’t start: inspect latch/strike alignment and the strike 154662601
• Rack problems (won’t roll smoothly): replace worn wheels like dishwasher wheel 5304532229

When replacement makes more sense

Replacement is the better value when you have repeated failures or a high-dollar electrical issue.

Situation	Typical best choice	Why
Single leak, fill, drain, or latch problem	Repair	Parts are usually affordable and targeted
Multiple issues at once (leak + won’t drain + won’t heat)	Replace	Labor and parts add up quickly
Control or wiring problems plus other symptoms	Replace	Troubleshooting time and cost rise

Why it matters

A dishwasher that fills, washes, heats, and drains correctly can run for years with basic maintenance. The manual notes that a small amount of water in the bottom of the tub is normal (it helps keep seals lubricated), and it also calls out performance basics like using fresh detergent and hot water around 120°F for best results; those simple factors can prevent “false alarm” repairs.

Helpful DIY reference

If you are diagnosing a flashing light or code before deciding to repair, use Kenmore he dishwasher error codes.

Last updated: February 2026

The model number for your Kenmore dishwasher is printed on the serial plate fastened to the tub wall just inside the dishwasher door. Open the door and look along the inner tub wall area for the model and serial information; confirm the format in the owner's manual.

Where to look (fastest checks)

• Open the dishwasher door fully.
• Look for a serial plate or label on the tub wall just inside the door.
• Check the left and right tub walls; the label is typically near the front opening.
• Wipe the area with a damp cloth if the print is hard to read.
• Write down the full model number and serial number exactly as shown.

What the label helps you do

Having the correct model number ensures we match the right diagrams and manufacturer-approved parts for Kenmore model 58714432200, such as a water valve 154637401 or latch handle 5304442175.

You need	Why it matters	Example for this unit
Model number	Identifies the exact dishwasher design	58714432200
Serial number	Helps match production changes	Varies by unit
Part number	Ensures correct replacement part	Printed on the part listing

Why it matters

Kenmore dishwashers can look similar across series, but internal components (like the fill system, door latch, or control panel) can differ. Using the serial plate model number prevents ordering the wrong part and speeds up troubleshooting.

Last updated: March 2026