Craftsman 917272352 lawn tractor Parts

The Craftsman lawn tractor model 917272352 is equipped with a low-emission 15.5 HP engine (gas) and is paired with a 42-inch mower deck and electric start. For the exact engine brand and service details for your unit, use the 917272352 owner's manual.

What we can confirm for model 917272352

From the model-specific documentation, this tractor is described as:

• 15.5 HP engine
• Low-emission design (operates differently than older engines)
• Electric start
• 42-inch mower deck
• 6-speed transaxle

How to identify the exact engine brand and model on your tractor

Many Craftsman tractors were built with engines from common manufacturers (for example, Briggs and Stratton or Kohler), but the sure way is to read the engine ID label on your specific tractor.

• Lift the hood and look for an engine data tag on the blower housing or valve cover
• Write down the engine model, type, and code (or spec number)
• Match that information to the engine section in the 917272352 owner's manual
• Use the engine ID when ordering tune-up parts (spark plug, air filter, fuel filter)

Quick comparison: engine description vs. what it affects

Engine detail	What it tells you	Why you need it
Horsepower rating (15.5 HP)	Power class of the tractor	Helps set expectations for mowing and towing loads
Low-emission design	Newer emissions system and tuning	Impacts starting, choke use, and maintenance steps
Engine model/type/code	Exact engine build	Required for correct engine parts and specs

Why it matters

Using the correct engine identification prevents wrong-part orders and helps you follow the right maintenance schedule (oil type, spark plug gap, air filter service). It also speeds up troubleshooting if the tractor cranks, clicks, or will not start.

Last updated: February 2026

Craftsman lawn tractor model 917272352 is a mid-2000s LT-series tractor, most commonly placed in the 2004 to 2006 production window. For the most accurate identification, we use the model and product information shown in the 917272352 owner's manual.

How to confirm the build year on your tractor

The model number tells us the family, but the exact build year is best confirmed from the tractor’s ID label and documentation.

• Find the model and serial number label (commonly under the seat, on the frame near the rear fender, or near the engine compartment)
• Write down the full serial number exactly as shown
• Compare the label information to the identification details in the 917272352 owner's manual
• If you are ordering parts, match by model number plus serial range when available
• Keep the label clean and readable; paint and debris can hide digits

What “917” means (and what it does not)

Many Craftsman riding mowers use a 917 model prefix associated with a specific manufacturing source and parts system. It helps narrow down the platform, but it does not by itself give a single exact calendar year.

Quick guide

What you have	What it tells you	Best use
Model number (917272352)	Tractor platform and parts breakdowns	Choosing correct diagrams and assemblies
Serial number	Production run timing	Pinpointing the build year
Owner’s manual	Supported configurations and part lists	Verifying what matches your tractor

Why it matters

The build year affects deck configuration, ground drive parts, steering components, and decals. Even within the same model family, small changes can impact fit. For example, common wear items like the ground drive V-belt and steering hardware should be matched carefully to your tractor’s exact configuration.

Last updated: February 2026

To identify your Craftsman mower model, we look for the model number on the tractor’s ID label. On Craftsman riding tractors like model 917272352, it’s commonly found under the seat or on the frame near the rear wheels; confirm the exact location and format in the 917272352 owner's manual.

Where to find the model number on a Craftsman riding mower

Check these common spots first (wipe dirt and grass off the label so it’s readable):

• Under the seat on the fender pan or seat support
• On the frame rail near the rear axle
• Under the hood near the engine compartment
• Near the footrest area on the frame
• On the mower deck shell (less common for the main tractor model)

What the model number looks like (and why it matters)

Craftsman riding mower model numbers are typically 9 digits (sometimes shown with a dot, like 917.272352). That number is what we use to match the correct parts diagrams, belts, blades, and hardware.

Model number vs. engine number

What you find on the label	What it identifies	Use it for
Tractor model number (example: 917272352)	The mower/tractor	Parts lookup for deck, steering, transaxle, belts
Engine model/type/code	The engine only	Engine tune-up parts and engine-specific service

Quick tips to avoid ordering the wrong part

Before ordering parts like a blade, V-belt, or mandrel assembly, we match by model number and deck size.

• Write down the full model number exactly as shown
• Note the deck size (this model uses a 42-inch mower deck)
• Match the part type to your mowing setup (mulching vs. high-lift)
• If you’re replacing deck parts, compare your current blade style and mounting pattern

If you’re shopping for deck blades for this tractor, examples include the husqvarna lawn tractor mulching blade, 21-in 532134149 and the lawn tractor 42-in deck high-lift blade 532138971.

Why it matters

Using the correct model number prevents fit issues and repeat repairs, especially on high-wear items like blades, mandrel components, and drive belts.

Last updated: February 2026