Owner’s manual
View engine
What model number is the Craftsman 917378761?
The model number is 917.378761; it’s printed on the mower’s model tag and shown on the cover of the 917378761 owner's manual. This Craftsman walk-behind mower is a 21-inch rear-discharge, power-propelled unit.
Check these common locations on Craftsman walk-behind mowers like model 917.378761:
- On the deck housing near the rear discharge area
- Near the rear wheel height adjuster area
- On a label near the engine mounting area
- On the handle support area (lower handle brackets)
Your mower has a mower model number and a separate engine model number. The manual for 917.378761 lists a Briggs & Stratton engine model 123K02-0315-E1.
| What you’re identifying | Example for this mower | What it’s used for |
|---|---|---|
| Mower model number | 917.378761 | Finding correct Craftsman parts diagrams and chassis parts |
| Engine model number | 123K02-0315-E1 | Finding engine-specific parts like carburetor or ignition components |
Using the exact mower model number prevents ordering the wrong parts (wheels, drive components, control cables) because Craftsman walk-behind mowers often look similar across multiple model series.
If you’re matching parts to the drive system or controls, use the model number 917.378761 and compare the part description carefully. For example, the lawn mower engine zone control cable 532184588 is a model-specific control component listed for this mower.
Last updated: January 2026
What is the average lifespan of 917378761?
A Craftsman walk-behind mower like model 917378761 typically lasts 8 to 12 years with normal residential use and routine maintenance (oil changes, clean air filter, sharp blade, and proper storage). Following the maintenance schedule in the owner's manual is the fastest way to reach the full lifespan.
- Engine maintenance: regular oil changes and clean cooling fins prevent overheating
- Air filtration: a clogged filter accelerates engine wear
- Blade condition: a bent or dull blade increases vibration and stresses the crankshaft
- Drive system wear: belts, wheels, and gears wear faster on hills and rough terrain
- Storage: dry storage and stabilized fuel reduce carburetor and tank issues
| Use pattern | Typical lifespan | Notes |
|---|---|---|
| Light (small yard, weekly in-season) | 10 to 12 years | Most common with good maintenance |
| Moderate (larger yard, longer run time) | 8 to 10 years | More wear on drive and wheels |
| Heavy (frequent, rough terrain) | 6 to 8 years | Faster wear on belt, wheels, and controls |
- Hard starting even with fresh fuel and a good spark plug
- Excessive vibration or repeated blade adapter loosening
- Self-propel drive slipping or not pulling consistently
- Uneven cut from deck damage or persistent height adjustment problems
Knowing the expected lifespan helps you decide whether to tune up the mower or replace wear items like the lawn mower ground drive belt, 3/8 x 32-1/2-in 532175436 to restore performance and extend service life.
Last updated: March 2026
What replacement parts are most commonly needed for the 917378761?
For Craftsman walk-behind mower model 917378761, the most commonly needed replacement parts are the self-propel drive wear items (belt, wheels, gears), control components (zone control cable, bail control), and blade-mount hardware. Use the diagrams and part callouts in the owner's manual to match the exact part to your mower’s configuration.
- Lawn mower ground drive belt, 3/8 x 32-1/2-in 532175436 (slipping or no self-propel)
- Lawn mower wheel 582976701 (worn tread, wobble, or cracked hub)
- Lawn mower drive pinion gear 532137054 (drive clicks, skips, or won’t pull)
- Lawn mower engine zone control cable 532184588 (engine won’t stay running when you hold the handle)
- Lawn mower blade adapter 532421176 (blade loosens, vibration, or stripped adapter)
| Symptom | Most likely area | Parts to check |
|---|---|---|
| Self-propel slips or stops under load | Ground drive | Belt, pinion gear, wheels |
| Engine stops when you release the handle (normal) but also dies while held | Operator control | Zone control cable, bail control |
| Excessive vibration after hitting debris | Blade mount | Blade adapter, debris shield |
| Wheel wobbles or won’t roll smoothly | Wheel/axle | Wheel, bearing, axle hardware |
- Verify the model number 917378761 on the ID label
- Compare your part to the diagram reference in the manual
- Inspect related hardware (washers, E-rings, screws) for wear or missing pieces
- Clean grass buildup around the drive and wheel areas before reassembly
Replacing the correct wear part restores cut quality and drive performance, and it prevents secondary damage (for example, a slipping belt can accelerate gear and wheel wear).
Last updated: March 2026
