Kenmore 79070603011 gas range Parts

On Kenmore gas range model 79070603011, the model and serial number identification plate is located on the right-hand surface of the oven front frame. You can access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration); see the installation guide.

Where to look on model 79070603011

Check these spots in this order:

• Pull out and open the bottom drawer (storage, warmer, or broiler drawer)
• Look on the right-hand side of the oven front frame for the identification plate
• Write down the model number and serial number exactly as shown
• Also note any lot number or letter listed on the plate (helpful for parts matching)

What the identification plate tells you (and why it matters)

Besides the model number, the plate typically lists key gas range details that affect troubleshooting and parts selection.

Item on plate	Why we use it
Model number	Ensures you get the correct Kenmore parts breakdown and diagrams
Serial number	Helps match production variations
Lot number/letter	Useful when a model has multiple revisions
Fuel type and pressure	Confirms how the range was set up when it left the factory

Tips for ordering the right parts

Using the exact model and serial information prevents wrong-part returns and speeds up repairs.

• Match parts to 79070603011 (not just “Kenmore gas range”)
• If you are fixing ignition issues, common related parts include the oven igniter and spark system
• For example, an oven that will not light often points to the range oven burner igniter 5304509706 (verify symptoms before replacing)

Why it matters

Kenmore ranges can look similar across model series, but burner ratings, fuel setup, and internal components can differ. Using the identification plate information is the fastest way to confirm compatibility for parts like igniters, spark modules, and control components.

Last updated: February 2026

For the Kenmore 79070603011 gas range, the installation information shows it is a standard 30-inch range; the exact oven cavity capacity (in cubic feet) is listed in the product specifications section of the installation guide.

What “size” can mean (and what we use for this model)

When customers ask for oven size, it usually refers to one of these:

• Range width (fits a 30-inch opening for most kitchens)
• Overall exterior dimensions (height, width, depth)
• Oven capacity (cubic feet)
• Cabinet and clearance requirements (minimum spacing to combustibles and cabinets)

What we can confirm from the installation instructions

The installation diagram for this Kenmore range indicates a 30-inch class unit intended for a standard range cutout.

Measurement type	What to use for Kenmore 79070603011	Why it matters
Range width / opening	30-inch standard	Ensures it fits between base cabinets
Cabinet depth note	If cabinet depth is over 25 inches, the front frame must extend past the cabinet front by at least 1/2 inch	Prevents interference and heat issues
Clearances	Follow the minimum clearances shown in the install diagram	Helps avoid heat damage and unsafe installs

How to get the exact exterior dimensions and oven capacity

Use the spec and dimension pages in the installation guide. Those pages are the right source for:

• Overall height (to the cooktop and to the backguard, if equipped)
• Overall depth (including the door handle, if specified)
• Overall width (nominal 30 inches, plus any trim details)
• Oven capacity (cubic feet), if listed for this model

Why it matters

Getting the correct “size” prevents common installation problems like a range that will not slide fully into the opening, a door that hits adjacent cabinetry, or insufficient clearance around gas and electrical connections.

Last updated: February 2026

For Kenmore gas range model 79070603011, fixing a failed oven igniter typically costs about $150 to $325 total when you hire service (part plus labor). If you DIY, the cost is usually the igniter itself; a common replacement is the range oven burner igniter 5304509706.

Typical cost breakdown

• Part cost (DIY): commonly $50 to $120 for many ranges (varies by design and availability)
• Labor (service call): commonly $100 to $200+ depending on your area and access to the burner
• Total installed: commonly $150 to $325
• Extra costs: may apply if wiring is damaged, the gas valve is not opening, or the oven needs additional diagnosis

Repair approach	What you pay for	Typical total cost
DIY replacement	Igniter only	$50 to $120
Professional repair	Igniter + labor	$150 to $325

What “normal” igniter operation looks like (helps confirm the diagnosis)

In this style of electric-ignition gas oven, the igniter should glow like a light bulb, then the gas valve opens and the burner lights. A 30 to 60 second delay before flame appears is normal. Use the installation guide for the model-specific ignition check steps.

Signs the igniter is the likely problem

• Oven takes longer than about a minute to light, or never lights
• Igniter glows but the burner does not ignite
• Weak, inconsistent ignition and frequent cycling issues
• You smell gas briefly with no ignition (turn the oven off and ventilate)

Why it matters

A weak igniter can prevent the oven gas valve from opening fully, so the burner will not light reliably. Replacing the igniter restores normal bake and broil ignition timing and helps the oven reach and hold temperature.

Last updated: February 2026

No. Stove igniters are not universal; the correct igniter must match your Kenmore 79070603011 gas range by mounting style, electrical connector, and the ignition system it works with (surface spark ignition versus oven glow-bar ignition). Using the wrong igniter can cause delayed ignition or no heat.

What “universal” really means

Many “universal” igniters are designed to fit multiple ranges by using alternate brackets or by splicing wires. That can work in some situations, but it still has to match the type of ignition your range uses.

Common differences that prevent true universality:

• Ignition type: surface electrode spark versus oven igniter that glows
• Connector style: plug-in harness versus bare leads
• Mounting: hole pattern, bracket shape, and igniter length
• Electrical characteristics: current draw and heat-up behavior
• Application: surface burner ignition parts are different from oven burner ignition parts

How to choose the right igniter for model 79070603011

Start by identifying whether you are fixing a surface burner that will not light or an oven/broil burner that will not ignite.

• For an oven that will not ignite, the oven igniter should glow and the burner should light after a short delay (typically 30 to 60 seconds) when the oven is turned on. See the ignition checks in the installation guide.
• For a surface burner that will not light, you should hear clicking/sparking at the LITE position and the burner should light quickly once air is purged from the gas line (typically within 4 seconds in normal operation). See the surface ignition checks in the installation guide.

Quick comparison

Symptom	Most likely igniter system	What you typically observe
Surface burner clicks but does not light	Surface electrode/spark system	Clicking sound, no flame
Oven set to Bake, no heat	Oven glow igniter system	No glow, or glow but no flame

Parts that commonly apply to ignition problems

If you are troubleshooting ignition on this model, these parts are commonly involved:

• Range oven burner igniter 5304509706 (oven burner ignition)
• Range spark module 5304508269 (creates spark for surface burners)
• Frigidaire range igniter switch and harness assembly 316580615 (switching and wiring for surface ignition)

Why it matters

Igniters are safety-critical. A correct match helps the burner light promptly and consistently, which reduces delayed ignition, uneven heating, and nuisance shutdowns.

Last updated: February 2026

On our Kenmore gas range model 79070603011, a bad igniter shows up as delayed or failed ignition: surface burners may click but not light, and the oven igniter may glow weakly or never light the burner within the normal timing. Use the installation guide checks to compare your symptoms to normal operation.

Normal ignition timing for this model

Based on the installation instructions, these are the expected behaviors:

• Surface burners: sparking at LITE, then flame within about 4 seconds after air is purged.
• Oven bake/broil: igniter glows, then burner lights after a 30 to 60 second delay.
• After a surface burner lights, turn the knob out of LITE to a flame setting.

Location	What you should see/hear	Typical time to light
Surface burner	Clicking/sparking, then flame	About 4 seconds
Oven bake/broil	Igniter glows, then flame	30 to 60 seconds

Signs the igniter is failing

• Repeated clicking/sparking but no flame
• Ignition only after a long delay or a sudden “whoosh”
• Oven igniter does not glow, or glows dimly and never lights
• You smell gas but the burner does not ignite (turn controls OFF and ventilate)
• One burner struggles while others work normally (points to that burner’s igniter/electrode circuit)

Checks to do before replacing parts

• Confirm burner caps are centered and firmly seated
• Purge air from the gas line by holding at LITE until it lights (after hookup or service)
• Make sure the range has electrical power (ignition needs power)

When replacement is the likely fix

If the oven burner will not light within the normal 30 to 60 seconds, or the igniter glows weakly, replacing the oven igniter is a common repair. The listed part for this model is the range oven burner igniter 5304509706.

Why it matters

A weak igniter causes delayed ignition, gas odor, and unreliable baking or broiling. Checking timing first helps you avoid replacing the wrong part.

Last updated: February 2026