Frigidaire FEF366ESE electric range Parts

To reset your Frigidaire FEF366ESE electric range, turn all controls OFF, then restore power by switching the range breaker OFF and back ON (or unplugging and plugging back in). After power returns, set the clock and reselect your oven function as needed (see the owner's manual).

Quick reset steps (recommended)

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off (if equipped) and confirm the display is idle.
• Turn the range circuit breaker OFF for about 30 seconds.
• Turn the breaker ON.
• Reset the clock and test Bake and a surface element.

If the range still will not heat

A “reset” will not fix a supply-voltage problem. If all burners and the oven are not heating, focus on power and wiring first.

• Confirm the range is on a dedicated circuit.
• Check for a tripped double-pole breaker (it can look ON when partially tripped).
• If the range was recently installed, recheck the terminal block connections and cord strain relief.
• Look for signs of overheating at the power connection; replace damaged parts before using the range.
• If only the oven will not heat, inspect common oven-heating parts such as the Frigidaire range bake element 316075103 and the Frigidaire range oven temperature sensor 316490000.

What to expect after a power interruption

Your range should not be operated during a power failure. When power resumes, the range can begin operating again if it was left on; always turn controls off during an outage, then reset the clock and oven settings afterward.

Common “reset” methods compared

Reset method	What it clears	Best for
Breaker OFF then ON	Control glitches, stuck display	Most reset situations
Unplug then plug in	Same as breaker reset	If the plug is accessible
Clock reset	Time-of-day only	After outages or flashing “12:00”

Why it matters

A proper reset helps clear minor electronic control issues, but confirming correct power (especially after installation) prevents no-heat symptoms and reduces the risk of damaged wiring, terminal block, or control components.

Last updated: February 2026

A Frigidaire electric range like model FEF366ESE typically lasts 10 to 15 years with normal household use. Keeping the cooktop and oven clean, avoiding overheating, and fixing heating or control issues early helps you reach the upper end of that range; see the owner's manual for care and cleaning guidance.

What affects how long an electric range lasts

• Heating element wear (bake and broil elements cycle on and off and eventually fatigue)
• Oven temperature accuracy (a drifting sensor can cause longer heat times and extra cycling)
• Cooktop habits (dragging pans can damage glass and create permanent marks)
• Electrical connection quality (loose terminal connections can cause heat damage)
• Cleaning and spill control (baked-on spills can damage finishes and components)

Maintenance that extends life (high impact)

• Clean the cooktop after it cools; use non-abrasive methods to prevent scratches.
• Wipe up oven spills promptly to reduce smoke, odors, and corrosion.
• If baking temps seem off, follow the manual’s oven temperature adjustment guidance.
• Replace failed heating parts promptly, such as the Frigidaire range bake element 316075103 or Frigidaire range broil element 316203200, to prevent uneven cooking and overwork.
• If the oven overheats or underheats, test/replace the Frigidaire range oven temperature sensor 316490000 as needed.

Quick “repair vs. replace” guide

What you’re seeing	Most likely category	Typical next step
Oven will not heat or heats unevenly	Heating circuit	Inspect/replace bake or broil element
Temps are consistently too hot/cold	Sensing/control	Check sensor, then calibration
Burner stays on high or won’t regulate	Surface control	Check surface element control switch
Lights or indicators act up	Indicator/lighting	Check indicator light or socket

Why it matters

A range that is heating correctly and cycling normally uses less energy, cooks more evenly, and puts less stress on key parts like elements, sensors, and wiring. That directly impacts whether your FEF366ESE lands closer to 10 years or closer to 15.

Last updated: February 2026

On the Frigidaire FEF366ESE electric range, the model and serial number plate is located behind the storage drawer on many versions of this range. Pull the drawer open and look for a label on the frame area; record both the model and serial number.

Where to look on the range

Use these quick checks in order:

• Open the storage drawer fully and look along the frame opening for a serial plate label
• If your range does not have a storage drawer, remove the outer lower panel and look behind it
• Check for a metal or white sticker label that lists both Model Number and Serial Number
• Write the numbers down exactly as shown (letters and numbers)
• Take a clear photo of the label for future parts ordering

What the label typically includes

Most Frigidaire range serial plates list the same key fields.

Label item	What it’s used for	Example (format)
Model number	Matching parts and diagrams to your exact range	FEF366ESE
Serial number	Identifying production run details	Letters and numbers
Electrical rating	Verifying power requirements	Volts/amps

Why it matters

We use the model number to match the correct Frigidaire electric range parts, diagrams, and wiring information. Even small model variations can change which bake element, control switch, or overlay fits.

Tip for ordering the right parts

When you have the model number, compare it to the model shown on your parts list and manual. If you are replacing an oven heating part, match by model first, then confirm the part description.

• For oven not heating: check the Frigidaire range bake element 316075103
• For inaccurate oven temps: check the Frigidaire range oven temperature sensor 316490000
• For a dead oven light: check the range oven light bulb 316538904

For the exact serial plate location details for your version of the range, use the owner's manual.

Last updated: March 2026