Kenmore 66513073K213 undercounter dishwasher Parts

No. On Kenmore dishwasher model 66513073K213, the lower spray arm is a core wash component; running without it leads to poor cleaning and can allow loose items or hardware to fall into the pump area. Keep the spray arm installed and the filters properly seated before starting a cycle (see the 66513073K213 owner’s manual).

What to do instead (safe options)

• If you removed the lower spray arm for cleaning, reinstall it before running a cycle.
• If you need to wash tall items, use a cycle/option intended for that setup if your model supports it (check the 66513073K213 owner’s manual).
• If the spray arm is cracked, warped, or won’t spin freely, replace it.
• If you hear grinding or thumping, stop the cycle and check for items extending below the racks.
• Keep the ULTRA WASH HE filters installed and locked; operating without properly installed filters can damage the dishwasher.

Quick checks before you press Start

1. Spin the lower spray arm by hand; it should rotate without hitting dishes.
2. Confirm the filter assemblies are seated and locked (a freely turning upper filter is not locked).
3. Load so nothing blocks the spray arm path (utensils, pan handles, small lids).
4. Use hot water at the sink first so water entering the dishwasher is about 120°F (49°C) for best wash performance.

Parts that commonly solve the problem

Symptom	Most likely issue	Part to consider
Dishes dirty on bottom rack	Spray arm clogged or damaged	Dishwasher spray arm WPW10491331
Poor wash plus debris in tub	Filter not seated or worn	Dishwasher filter WPW10463906 or dishwasher filter W10872845
Water left in tub	Drain restriction or weak pump	Dishwasher drain pump WPW10348269

Why it matters

The lower spray arm provides the pressurized spray that cleans the bottom rack and helps circulate water through the ULTRA WASH HE filtration system. Without it, wash coverage drops sharply and the risk of debris reaching the sump and pump increases.

Last updated: February 2026

Yes, repairing a Kenmore undercounter dishwasher like model 66513073K213 is worth it when the problem is isolated (draining, heating, filling, or washing performance) and the tub and door are in good shape; targeted part replacement usually costs far less than a full replacement and avoids reinstall work.

Quick way to decide

We use these checkpoints to decide whether repair is the smart move:

• The dishwasher is cleaning well after basic maintenance (filter cleaning, correct detergent, rinse aid).
• The failure is limited to one system (drain, fill, heat, or circulation) rather than multiple recurring issues.
• There is no ongoing leak from the tub or major door structure damage.
• The unit powers on reliably (no repeated breaker trips).
• You can confirm proper installation basics (drain hose routing, water line, electrical supply).

Common repairs that are usually worth it (and the parts involved)

Many “not draining” or “not drying” complaints come down to a single replaceable component.

Symptom	What to check first	Part that often fixes it (if failed)
Won’t drain, water left in bottom	Kink/obstruction in drain hose; disposer knockout plug removed	Dishwasher drain pump WPW10348269
Poor drying, water not heating	Cycle completes but dishes stay cool/wet	Element assembly W10518394
Not filling or fills slowly	House water supply on; inlet screen not clogged	Dishwasher water inlet valve W11175771
Cloudy dishes, debris left behind	Filter condition and cleaning frequency	Dishwasher filter WPW10463906

When replacement makes more sense

Replacement is typically the better choice when:

• The tub is damaged or leaking (a major structural repair).
• Multiple major systems are failing close together (fill, wash, drain, heat).
• You have repeated odor and residue issues even after monthly cleaning and filter maintenance.

Why it matters

A dishwasher that is installed correctly and maintained (especially filter cleaning and using rinse aid) runs more efficiently and avoids common issues like hard-water residue and odors. Our 66513073K213 documentation also emphasizes basics like proper drain routing, a grounded electrical supply, and protecting the unit from freezing for reliable operation; see the 66513073K213 installation guide and 66513073K213 owner's manual.

Last updated: February 2026

On Kenmore dishwasher model 66513073K213, the model number is printed on the appliance’s identification label; you’ll typically find it on the tub frame just inside the door. Match every character exactly so you get the right diagrams, manual, and replacement parts.

Where to look on the dishwasher

Check these common label locations (in this order):

• Along the left or right tub frame (the vertical edge you see when you open the door)
• On the top edge of the inner door
• Around the door opening near the latch area
• On the side of the tub opening near the front corners

If the label is dirty or faded, wipe it with a damp cloth and read it under a bright light.

What to write down (so parts fit)

Record the full model number and any extra identifiers shown on the label.

• Full model number (example: 66513073K213)
• Any prefix/suffix characters (do not drop letters)
• Serial number (helpful for production changes)
• Color code or other small codes if listed

Quick checklist

Item	Why we need it
Model number	Ensures correct parts list and diagrams
Serial number	Helps match version changes within the same model
Suffix letters/numbers	Prevents ordering a similar but incorrect part

Why it matters

Kenmore dishwashers often share similar-looking doors and racks across multiple models. Using the exact model number helps you avoid ordering the wrong items, like a dishwasher filter W10872845 or a dishwasher drain pump WPW10348269 that may vary by revision.

Helpful reference

Your owner's manual also shows model series information and is a good place to confirm you are using the correct documentation for your dishwasher.

Last updated: March 2026