Whirlpool WFG510S0AS1 30" gas freestanding range Parts

On your Whirlpool WFG510S0AS1 gas range, we clear most error codes by resetting the electronic control and then retesting BAKE. If the code returns immediately, the control is still detecting a problem (often temperature sensing, door lock, ignition, or wiring).

• End the current cycle using the control panel’s Cancel/Off function (the key may be labeled CANCEL, OFF, or CLEAR/OFF).
• Turn the range OFF at the circuit breaker for 1 minute.
• Restore power and wait for the display to finish rebooting.
• Start a quick test: press BAKE, set a temperature, then press START.
• If the oven is still cold after about 5 minutes, verify the gas shutoff valve is fully open.

For the exact key labels and any model-specific reset sequence, use the WFG510S0AS1 owner’s manual.

A repeating code is a troubleshooting clue, not just a “memory” to clear.

Resetting clears control glitches and confirms whether the fault is active. If the code returns, addressing the underlying part or condition prevents no-heat problems, interrupted cooking cycles, and repeated shutdowns.

Last updated: February 2026

On the Whirlpool WFG510S0AS1 gas range, the AccuBake temperature management system is an oven temperature control feature that uses a sensor and the electronic control to monitor heat and cycle the bake burner to keep oven temperature more consistent for more even baking.

• The oven heat cycles on and off during baking; that is normal operation.
• Temperature can swing slightly above and below the set point; the system averages it out over time.
• Preheat may take longer than expected if the door is opened often.
• Bake results improve when cookware is centered and airflow is not blocked.
• A weak ignition or a failing sensor can make temperatures drift or cause long preheat times.

AccuBake relies on the oven temperature sensor and the control to “read” and regulate heat. If you are troubleshooting inaccurate temperatures, these model-matched parts are common checks:

• Confirm the range is level; leveling affects how heat and airflow behave in the oven.
• Use the center rack position for most baking.
• Avoid covering the oven rack with foil (it restricts airflow).
• If preheat is slow or heat is inconsistent, inspect ignition performance and wiring connections.
• Follow the operating and calibration guidance in the WFG510S0AS1 owner’s manual.

AccuBake is designed to reduce hot spots and temperature drift, which helps cookies brown more evenly, cakes rise more consistently, and roasting times stay closer to what recipes expect.

Last updated: February 2026

For the Whirlpool WFG510S0AS1 30 inch gas freestanding range, the model number is printed on the model and serial rating plate. You will find that plate on the oven frame behind the top left side of the oven door; open the door and look along that area of the frame.

• Open the oven door fully.
• Look at the oven frame (not the door itself).
• Focus on the top left side of the frame.
• Find the label that lists model and serial information.
• Write the model number exactly as shown (letters and numbers).

That rating plate is the official ID for your range. We use it to match the correct Whirlpool parts and specifications, including gas type information and installation clearances.

• Confirm the model number matches WFG510S0AS1 exactly.
• Use the full model number when searching for parts like an oven igniter, oven temperature sensor, or control board.
• If the label is hard to read, take a clear photo and zoom in.

For additional diagrams and identification details, use the installation guide.

Last updated: March 2026