Kenmore 10659299991 side-by-side refrigerator Parts

If your Kenmore 10659299991 side-by-side refrigerator ice maker is not making ice, the most common causes are the ice maker being switched off (shut-off arm up), the freezer not cold enough, or a water supply problem. Use the 10659299991 owner's manual steps to confirm the ice maker is turned on and allow a full 24 hours for production.

• Make sure the wire shut-off arm is down (ON). If it is up, the ice maker is off.
• Confirm the ice bucket is installed correctly; some models will not make ice with the bucket removed.
• Wait long enough after changes; allow 24 hours to produce the first batch.
• If ice is being made but slowly, adjust the freezer control colder in small steps and wait 24 hours between changes.
• If you recently connected water or changed a filter, discard the first three batches of ice.

In normal mode, this style of Kenmore 106 refrigerator typically makes about 7 to 9 batches in 24 hours. Some versions have a maximum ice feature that can raise output to about 10 to 14 batches in 24 hours.

If the ice maker is on and the freezer is cold but you still get no ice, we focus on water fill and ice maker components.

• No water entering the ice maker: test/replace the refrigerator inlet valve W10408179
• Ice maker mechanism not cycling: replace the ice maker assembly 4317943
• Ice maker fills but cubes do not harvest: inspect the refrigerator ice mold WPW10190929

An ice maker needs the right freezer temperature, a working shut-off system, and steady water flow. Fixing the “simple” items first (arm position, bucket installed, 24-hour wait, colder setting) prevents unnecessary part replacement and gets ice production back faster.

Last updated: February 2026

Yes. A 30-inch-wide side-by-side refrigerator is a standard size that several brands have produced over the years, including compact and full-height models. For your Kenmore 10659299991, the best way to confirm fit is to compare your cabinet opening and required clearances in the owner's manual.

Measure your opening first, then plan for airflow and door swing.

• Measure the cabinet opening width at the front and back (some openings taper)
• Confirm height and depth limits, including hinges and handles
• Plan ventilation clearance: typically 1/2 inch on each side and at the top
• If the unit has an ice maker, leave extra room behind for the water line
• If installed next to a fixed wall, plan for about 2 inches on the hinge side so doors can open fully

These are common clearance targets for side-by-side refrigerators and match the guidance in the Kenmore manual.

Even when the refrigerator is exactly 30 inches wide, the opening often needs to be wider once you account for airflow space, door swing, and water line connections for the ice maker and dispenser. Planning these clearances prevents warm temperatures, noisy operation, and hard-to-open doors.

If you are choosing a 30-inch side-by-side with ice and water, these components are commonly involved in fit and hookup decisions:

• Ice maker assembly and ice storage bin location
• Water inlet valve and water tubing routing
• Water filter housing placement and filter access
• Door bins and door swing clearance near walls

If you need replacement parts for your Kenmore 10659299991 while you plan a replacement, you can order model-matched parts from the list for this refrigerator or search by model on Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10659299991, the model number is printed on the model and serial number label located on the inside wall of the refrigerator compartment. Use the full model number and serial number from that label when ordering parts or looking up service information in the 10659299991 owner's manual.

• Open the fresh food (refrigerator) door, not the freezer door
• Look along the inside walls of the refrigerator compartment
• Check near the crisper area and side walls where labels are commonly placed
• Use a flashlight; the label can be small or partially shadowed
• Write down both the model number and serial number exactly as shown

The label typically includes both identifiers. Here is what to record:

Kenmore model numbers can look similar across different side-by-side refrigerators. Using the exact model and serial number from the inside-compartment label helps us match the correct parts diagram and avoid ordering the wrong items (for example, an ice maker assembly 4317943 or refrigerator inlet valve W10408179).

• Match the model number exactly to pull the correct parts list
• Use the parts diagrams to identify the part name and part ID
• Order directly from the parts list for model 10659299991, or search by model number on Sears PartsDirect

Last updated: February 2026

For Kenmore model 10659299991, the most accurate way to get cubic feet is to read the model and serial number label inside the fresh food compartment and then confirm the capacity in the owner's manual. Model numbers can hint at size, but the label and specs are the reliable match.

• Check the rating plate/label inside the refrigerator compartment (usually on an inside wall).
• Look up the specifications section in the owner's manual for model 10659299991.
• Measure and estimate only if you cannot access the label or manual (useful for rough planning).
• Use the parts list for your exact model to stay aligned with the correct platform and configuration; you can also search by model on Sears PartsDirect.

If you need an approximate cubic feet number for moving, kitchen planning, or comparing models, you can estimate interior volume:

Cubic feet affects how much food you can store, but it also impacts parts fit and performance expectations. For example, storage components like the refrigerator crisper pan WP2188656 are designed around the exact cabinet and liner dimensions used on model 10659299991.

If you are trying to match specs because of a display issue or control problem, checking model-specific diagnostics can help; see Kenmore 106 model refrigerator error codes.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10659299991 are poor cooling, ice maker and dispenser issues, door sealing problems, leaks, and unusual noises. Many of these trace back to airflow (dirty coils, fan issues) or water supply and filtration; use the 10659299991 owner's manual troubleshooting steps to narrow it down fast.

• Not cooling or warm temps: dirty condenser coils, frost restricting airflow, evaporator fan problems
• Runs constantly: dirty coils, doors not closing fully, worn door gaskets
• Water dispenser slow or dripping: clogged filter, air in lines, restricted supply, inlet valve issues
• Ice maker not making ice: water supply problem, inlet valve problem, failed ice maker
• Noises: normal operating sounds, or a fan blade rubbing or out of balance

• Make sure both doors close completely and shelves or bins are not blocking them.
• Clean the condenser coils; dirty coils reduce heat transfer and increase run time.
• If dispenser flow drops, reinstall the filter correctly; if flow improves with the filter removed, replace the filter.
• If the dispenser drips, hold the glass under the chute 2 to 3 seconds after releasing the lever (a small delay is normal).

Airflow and water flow problems can mimic bigger failures. Fixing the root cause helps protect food temperatures, reduces compressor run time, and prevents repeat ice and water issues.

You can order replacement parts from the parts list for model 10659299991, or search by model number on Sears PartsDirect.

Last updated: February 2026