Kenmore 36314081992 dishwasher Parts

To identify your Kenmore dishwasher model, we look for the rating label on the inside edge of the door. On Kenmore model 36314081992, that label lists the model number and serial number, which you can use to match the correct parts and instructions in the installation guide.

Where to find the model and serial number

Check these common label locations first:

• Inside the door opening, along the left side of the tub frame
• Inside the door opening, along the right side of the tub frame
• On the top edge of the door (visible when the door is open)
• Along the inner door panel near the latch area

What to write down (and why)

Record both numbers exactly as shown (letters and digits matter).

Item on label	What it’s used for	Example format
Model number	Ensures parts fit your exact dishwasher design	36314081992
Serial number	Helps confirm production run details for some parts	Mix of letters and numbers

Tips to avoid common mistakes

• Copy the model number character-for-character; do not drop leading zeros.
• If the label is worn, use a flashlight and take a close-up photo.
• Match the full model number, not just “Kenmore 363” or a partial series.
• Use the model number when selecting parts like a rack roller WD28X31819 or a dishwasher water inlet valve WD15X93.

Why it matters

Kenmore dishwashers can look similar across series, but racks, pumps, door parts, and electrical components vary by model. Using the exact model number prevents ordering the wrong part and helps you follow the correct installation and service steps.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore dishwasher like model 36314081992 when the problem is a single failed part (drain, fill, wash, or door switch) and the tub and racks are still in good shape; a targeted repair often restores normal cleaning and draining for far less than replacement.

When repair is the smart choice

Repair makes the most sense when the dishwasher has one clear symptom and you can tie it to a common service part.

• It won’t drain but the unit otherwise runs normally (often a drain-path or solenoid issue)
• It fills but doesn’t wash well (circulation or spray issue)
• It won’t start consistently (door latch or interlock problem)
• You see a small leak at the door perimeter (seal or baffle area)
• The racks still roll smoothly and the tub is not damaged

When replacement is the better value

If multiple major systems are failing, replacement tends to be the better long-term decision.

• Repeated breakdowns in different areas (fill, wash, drain, and controls)
• Heavy rust on racks or a damaged tub that can’t be sealed reliably
• Persistent odor or poor cleaning even after maintenance and part replacement
• You need quieter operation or newer cycle features that older units don’t offer

Quick cost-to-benefit guide (typical)

Use this as a practical way to decide before ordering parts.

What’s wrong	Typical repair scope	Usually worth repairing?
Won’t drain	Clear blockage; replace drain components if needed	Yes
Poor wash / no spray	Clean spray arm; replace circulation parts if needed	Yes
Won’t start	Check door switch/interlock; replace if faulty	Yes
Multiple major failures	Several parts plus labor	No

Parts that commonly tip the decision toward repair

If your symptoms match, these are the types of repairs that are often straightforward and cost-effective.

• Dishwasher water inlet valve WD15X93 (no fill, slow fill)
• Dishwasher spray arm WD22X154 (weak spray, poor cleaning)
• Interlock WD21X10261 (won’t start, stops when door is bumped)
• Dishwasher drain hose WD24X10014 (drain leaks, poor draining due to kinks)

Why it matters

A dishwasher replacement includes removal, installation, and potential cabinet adjustments. A focused repair on model 36314081992 can restore performance quickly while avoiding installation hassles and reducing waste.

For model-specific installation and setup checks (drain loop, leveling, and connections), use the installation guide.

Last updated: February 2026

For the Kenmore 36314081992 dishwasher, the most commonly replaced parts are the ones that handle water fill and drain, washing action, door closing, and rack movement. If you are troubleshooting a symptom, our parts list and the installation guide help you match the right part to the failure.

Commonly replaced parts for this model

These are frequent wear items and failure points on many Kenmore dishwashers, and they are available for model 36314081992:

• Water fill problems (won’t fill, fills slowly, overfills): dishwasher water inlet valve WD15X93, dishwasher float switch WD21X479, dishwasher float assembly WD12X334
• Drain problems (won’t drain, standing water): dishwasher drain hose WD24X10014, dishwasher drain solenoid kit WD21X10060, dishwasher drain solenoid link WD1X1316
• Poor cleaning (weak spray, debris left behind): dishwasher spray arm WD22X154, dishwasher circulation pump WD19X10020
• Door won’t latch or won’t start: dishwasher door latch actuator WD1X1363, interlock WD21X10261
• Rack issues (rack falls off track, hard to roll): rack roller WD28X31819, dishwasher dishrack roller, lower front WD12X271, dishwasher dishrack slide rail WD30X98

Quick symptom-to-part guide

Symptom	Most likely part areas	Example parts on this model
Not filling or filling slowly	Inlet valve, float/float switch	WD15X93, WD12X334, WD21X479
Not draining	Drain hose, drain solenoid/link	WD24X10014, WD21X10060, WD1X1316
Dishes not clean	Spray arm, circulation pump	WD22X154, WD19X10020
Won’t start when door closes	Door latch, interlock	WD1X1363, WD21X10261
Rack won’t roll smoothly	Rollers, rails	WD28X31819, WD12X271, WD30X98

Why it matters

Replacing the correct “root cause” part prevents repeat failures. For example, a dishwasher that won’t drain can be a kinked drain hose, a stuck drain solenoid, or a door-latch issue that stops the cycle before it reaches drain.

Helpful next steps before ordering

• Write down the main symptom (won’t fill, won’t drain, leaking, not cleaning, won’t start).
• Check for simple causes first: tripped breaker, door fully latched, kinked hose, blocked spray arm holes.
• Use the diagrams and mounting details in the installation guide to confirm access points and connections.
• If you see an error code, use Kenmore 363 electronic control model dishwasher error codes to narrow the failure.

Last updated: March 2026