Kenmore 36314081992 dishwasher Parts

To identify your Kenmore dishwasher model, we look for the rating label on the inside edge of the door. On Kenmore model 36314081992, that label lists the model number and serial number, which you can use to match the correct parts and instructions in the installation guide.

Check these common label locations first:

• Inside the door opening, along the left side of the tub frame
• Inside the door opening, along the right side of the tub frame
• On the top edge of the door (visible when the door is open)
• Along the inner door panel near the latch area

Record both numbers exactly as shown (letters and digits matter).

• Copy the model number character-for-character; do not drop leading zeros.
• If the label is worn, use a flashlight and take a close-up photo.
• Match the full model number, not just “Kenmore 363” or a partial series.
• Use the model number when selecting parts like a rack roller WD28X31819 or a dishwasher water inlet valve WD15X93.

Kenmore dishwashers can look similar across series, but racks, pumps, door parts, and electrical components vary by model. Using the exact model number prevents ordering the wrong part and helps you follow the correct installation and service steps.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore dishwasher like model 36314081992 when the problem is a single failed part (drain, fill, wash, or door switch) and the tub and racks are still in good shape; a targeted repair often restores normal cleaning and draining for far less than replacement.

Repair makes the most sense when the dishwasher has one clear symptom and you can tie it to a common service part.

• It won’t drain but the unit otherwise runs normally (often a drain-path or solenoid issue)
• It fills but doesn’t wash well (circulation or spray issue)
• It won’t start consistently (door latch or interlock problem)
• You see a small leak at the door perimeter (seal or baffle area)
• The racks still roll smoothly and the tub is not damaged

If multiple major systems are failing, replacement tends to be the better long-term decision.

• Repeated breakdowns in different areas (fill, wash, drain, and controls)
• Heavy rust on racks or a damaged tub that can’t be sealed reliably
• Persistent odor or poor cleaning even after maintenance and part replacement
• You need quieter operation or newer cycle features that older units don’t offer

Use this as a practical way to decide before ordering parts.

If your symptoms match, these are the types of repairs that are often straightforward and cost-effective.

• Dishwasher water inlet valve WD15X93 (no fill, slow fill)
• Dishwasher spray arm WD22X154 (weak spray, poor cleaning)
• Interlock WD21X10261 (won’t start, stops when door is bumped)
• Dishwasher drain hose WD24X10014 (drain leaks, poor draining due to kinks)

A dishwasher replacement includes removal, installation, and potential cabinet adjustments. A focused repair on model 36314081992 can restore performance quickly while avoiding installation hassles and reducing waste.

For model-specific installation and setup checks (drain loop, leveling, and connections), use the installation guide.

Last updated: February 2026

For the Kenmore 36314081992 dishwasher, the most commonly replaced parts are the ones that handle water fill and drain, washing action, door closing, and rack movement. If you are troubleshooting a symptom, our parts list and the installation guide help you match the right part to the failure.

These are frequent wear items and failure points on many Kenmore dishwashers, and they are available for model 36314081992:

• Water fill problems (won’t fill, fills slowly, overfills): dishwasher water inlet valve WD15X93, dishwasher float switch WD21X479, dishwasher float assembly WD12X334
• Drain problems (won’t drain, standing water): dishwasher drain hose WD24X10014, dishwasher drain solenoid kit WD21X10060, dishwasher drain solenoid link WD1X1316
• Poor cleaning (weak spray, debris left behind): dishwasher spray arm WD22X154, dishwasher circulation pump WD19X10020
• Door won’t latch or won’t start: dishwasher door latch actuator WD1X1363, interlock WD21X10261
• Rack issues (rack falls off track, hard to roll): rack roller WD28X31819, dishwasher dishrack roller, lower front WD12X271, dishwasher dishrack slide rail WD30X98

Replacing the correct “root cause” part prevents repeat failures. For example, a dishwasher that won’t drain can be a kinked drain hose, a stuck drain solenoid, or a door-latch issue that stops the cycle before it reaches drain.

• Write down the main symptom (won’t fill, won’t drain, leaking, not cleaning, won’t start).
• Check for simple causes first: tripped breaker, door fully latched, kinked hose, blocked spray arm holes.
• Use the diagrams and mounting details in the installation guide to confirm access points and connections.
• If you see an error code, use Kenmore 363 electronic control model dishwasher error codes to narrow the failure.

Last updated: March 2026