Frigidaire FFHT1725PS4 refrigerator Parts

The most common Frigidaire refrigerator problem is a cooling issue caused by restricted airflow or a defrost system problem, which shows up as warm fresh-food temps, frost buildup on the freezer back wall, or a noisy fan. For your Frigidaire FFHT1725PS4, start with basic airflow and control checks in the FFHT1725PS4 owner's manual.

Most common symptoms customers notice

• Refrigerator section is warm but freezer seems cold
• Frost or ice buildup on the freezer rear panel
• Loud humming, rattling, or a fan noise that comes and goes
• Water puddles inside the fridge or under the unit
• Temperature swings after changing the control setting

Quick checks we recommend first (no parts needed)

• Confirm control settings and wait time: after you change temperature controls, wait 24 hours before adjusting again (this is normal for this style of refrigerator).
• Check door sealing: make sure both doors close fully and the gasket seals on all sides.
• Verify leveling: the cabinet should be level side-to-side and tilted about 1/4 inch front-to-back so doors self-close.
• Keep vents clear: do not block air vents with food packages.
• Give it breathing room: allow typical installation clearances (about 3/8 inch at sides/top and 1 inch at the back).

When it points to a part (common fixes)

If the checks above do not help, these are the most common part-related causes:

What you observe	Likely area	Example part for FFHT1725PS4
Frost buildup, weak airflow	Evaporator fan or defrost system	Refrigerator evaporator fan blade 5308000010
Clicking, won’t start cooling	Compressor start components	Electrolux refrigerator compressor start relay 241941005
Door won’t seal, moisture/frost	Door gasket	Refrigerator door gasket 242193210

Why it matters

Cooling and airflow problems can make food unsafe, increase energy use, and overwork the compressor. Catching a failing fan, defrost timer, or door seal early helps prevent bigger repairs.

Last updated: February 2026

Yes. For your Frigidaire FFHT1725PS4 top-mount refrigerator, using the full model number is the most accurate way to find parts that fit, because it filters the parts list to the exact door, shelf, fan, and electrical components used on your unit.

How to look up parts by model number (what we recommend)

• Use the complete model number exactly as shown on the model tag: FFHT1725PS4.
• Match the part by name and part ID (this avoids ordering a similar-looking part that does not fit).
• Confirm the part’s location and any notes in the diagrams and parts list for your model.
• If you are troubleshooting, identify the symptom first (no cooling, warm freezer, noisy fan, door not sealing) and then choose the part.
• Use the FFHT1725PS4 owner's manual for model-specific feature and setup details that affect parts selection (controls, icemaker on/off, door removal guidance).

Common FFHT1725PS4 parts customers look up by model number

These are examples of parts on the FFHT1725PS4 parts list that are often searched by model:

• Refrigerator light bulb 316538904 (interior light not working)
• Refrigerator door gasket 242193210 (door not sealing, moisture, temperature swings)
• Refrigerator evaporator fan motor 241854301 (warm fridge, weak airflow, fan noise)
• Refrigerator defrost bi-metal thermostat 5303918634 (frost buildup, cooling issues)
• Refrigerator toe grille 240368303 (missing or damaged lower front grille)

Quick “match it right” checklist

What to match	Why it matters	Where to confirm
Model number: FFHT1725PS4	Ensures fit and compatibility	Model tag, parts list
Part ID (example: 241854301)	Identifies the exact item sold	Parts list/part page
Part name (example: evaporator fan motor)	Prevents mix-ups with similar parts	Parts list/diagram

Why it matters

Refrigerator parts can look interchangeable across Frigidaire models, but differences in wiring, mounting, and door configuration are common. Searching by FFHT1725PS4 keeps you aligned with the correct components for your top-mount refrigerator.

Last updated: February 2026

A Frigidaire refrigerator like model FFHT1725PS4 typically lasts 13 years with normal household use. Consistent temperatures, clean condenser airflow, and good door sealing do the most to extend life and reduce compressor and fan wear; check care details in the owner's manual.

Typical lifespan and what affects it

Most full-size top-mount refrigerators land in a similar range, but real-world lifespan depends on usage and maintenance.

• Heat and airflow: blocked airflow around the cabinet makes the compressor run longer
• Door seal condition: leaks force longer run times and create frost and moisture issues
• Temperature settings: frequent changes or overly cold settings increase run time
• Cleaning habits: dusty condenser areas raise operating temperatures
• Power quality: repeated outages and surges stress start components

Quick benchmarks (what “normal” looks like)

Item	Typical target	Why it matters
Average lifespan	13 years	Common service-life expectation for household refrigerators
Fresh food temp	37°F to 40°F	Food safety and stable cycling
Freezer temp	0°F to 5°F	Prevents thawing and excess frost
Control changes	Wait 24 hours between adjustments	Lets temperatures stabilize

Signs your refrigerator is nearing end-of-life

These symptoms often show up more frequently as sealed-system and airflow components age:

• Runs almost constantly but temperatures drift warm
• Loud or intermittent fan noise (freezer or rear base area)
• Frost buildup that returns quickly after defrosting
• Water puddles or recurring moisture inside
• Door not sealing evenly (warm spots, condensation at the gasket)

What we recommend to help it reach (or beat) the average

Use these maintenance steps to reduce strain on the compressor, condenser fan, and evaporator fan.

• Keep vents inside the refrigerator and freezer unblocked
• Maintain proper installation clearances (typical guidance is 3/8 inch at sides/top and 1 inch at the back)
• Level the cabinet so doors close and seal consistently (toe grille and leveling steps are in the installation guide)
• Clean dust from the condenser area periodically
• If cooling is uneven or noisy, inspect the evaporator fan area; the refrigerator evaporator fan blade 5308000010 is a common wear item when blades crack or wobble

Why it matters

A refrigerator that seals well and breathes properly cycles less often. That reduces heat load and electrical stress on the compressor and fan motors, which are the most expensive systems to repair.

Last updated: February 2026

In a refrigerator like the Frigidaire FFHT1725PS4, the most commonly replaced parts are the ones tied to cooling airflow, defrosting, door sealing, and basic electrical starting. These parts wear from normal use and are often replaced to restore proper temperatures and prevent frost or leaks.

Most common refrigerator parts that get replaced

These are the parts we see replaced most often across top-mount refrigerators:

• Evaporator fan motor and fan blade: moves cold air through the freezer and fresh food sections
• Condenser fan motor and fan blade: cools the condenser coil and helps the compressor run efficiently
• Defrost components (timer, defrost thermostat): prevent heavy frost buildup on the evaporator
• Door gaskets: keep warm, humid air out to reduce frost and temperature swings
• Light bulb: simple wear item that fails over time

Model-specific examples for FFHT1725PS4

If you are troubleshooting this model, these commonly replaced parts are available for FFHT1725PS4:

• Refrigerator evaporator fan motor 241854301
• Refrigerator condenser fan blade 241639502
• Refrigerator defrost timer 215846604
• Refrigerator defrost bi-metal thermostat 5303918634
• Refrigerator door gasket 242193210

Quick symptom-to-part guide

Symptom	Common cause	What to check first
Fridge warm, freezer cold	Evaporator fan issue	Fan running, ice blocking airflow
Both sections warm	Condenser fan or start components	Fan running, coils dirty, relay clicking
Frost wall in freezer	Defrost problem	Defrost thermostat, timer
Moisture, frost near door	Door seal leak	Gasket tears, gaps, door alignment

Why it matters

Replacing the right “high-wear” part first can restore cooling faster and prevent bigger failures. For example, a weak condenser fan can overheat the compressor, and a leaking gasket can cause constant running and heavy frost.

Helpful setup and operating checks

From the installation guidance, these basics prevent many “it’s not cooling” complaints:

• Confirm the refrigerator is level and slightly tilted 1/4 inch (6 mm) front to back
• Make sure door seals close fully on all sides
• Allow proper airflow clearances (typically 3/8 inch at sides and top, 1 inch at back)
• After changing temperature controls, wait 24 hours before adjusting again

For model-specific operating and care details, use the FFHT1725PS4 installation guide.

Last updated: February 2026